2,587 research outputs found
Scan-Chain Intra-Cell Aware Testing
This paper first presents an evaluation of the effectiveness of different test pattern sets in terms of ability to detect possible intra-cell defects affecting the scan flip-flops. The analysis is then used to develop an effective test solution to improve the overall test quality. As a major result, the paper demonstrates that by combining test vectors generated by a commercial ATPG to detect stuck-at and delay faults, plus a fragment of extra test patterns generated to specifically target the escaped defects, we can obtain a higher intra-cell defect coverage (i.e., 6.46% on average) and a shorter test time (i.e., 42.20% on average) than by straightforwardly using an ATPG which directly targets these defects
Innovative Techniques for Testing and Diagnosing SoCs
We rely upon the continued functioning of many electronic devices for our everyday welfare,
usually embedding integrated circuits that are becoming even cheaper and smaller
with improved features. Nowadays, microelectronics can integrate a working computer
with CPU, memories, and even GPUs on a single die, namely System-On-Chip (SoC).
SoCs are also employed on automotive safety-critical applications, but need to be tested
thoroughly to comply with reliability standards, in particular the ISO26262 functional
safety for road vehicles.
The goal of this PhD. thesis is to improve SoC reliability by proposing innovative
techniques for testing and diagnosing its internal modules: CPUs, memories, peripherals,
and GPUs. The proposed approaches in the sequence appearing in this thesis are described
as follows:
1. Embedded Memory Diagnosis: Memories are dense and complex circuits which
are susceptible to design and manufacturing errors. Hence, it is important to understand
the fault occurrence in the memory array. In practice, the logical and physical
array representation differs due to an optimized design which adds enhancements to
the device, namely scrambling. This part proposes an accurate memory diagnosis
by showing the efforts of a software tool able to analyze test results, unscramble
the memory array, map failing syndromes to cell locations, elaborate cumulative
analysis, and elaborate a final fault model hypothesis. Several SRAM memory failing
syndromes were analyzed as case studies gathered on an industrial automotive
32-bit SoC developed by STMicroelectronics. The tool displayed defects virtually,
and results were confirmed by real photos taken from a microscope.
2. Functional Test Pattern Generation: The key for a successful test is the pattern applied
to the device. They can be structural or functional; the former usually benefits
from embedded test modules targeting manufacturing errors and is only effective
before shipping the component to the client. The latter, on the other hand, can be
applied during mission minimally impacting on performance but is penalized due
to high generation time. However, functional test patterns may benefit for having
different goals in functional mission mode. Part III of this PhD thesis proposes
three different functional test pattern generation methods for CPU cores embedded
in SoCs, targeting different test purposes, described as follows:
a. Functional Stress Patterns: Are suitable for optimizing functional stress during
I
Operational-life Tests and Burn-in Screening for an optimal device reliability
characterization
b. Functional Power Hungry Patterns: Are suitable for determining functional
peak power for strictly limiting the power of structural patterns during manufacturing
tests, thus reducing premature device over-kill while delivering high test
coverage
c. Software-Based Self-Test Patterns: Combines the potentiality of structural patterns
with functional ones, allowing its execution periodically during mission.
In addition, an external hardware communicating with a devised SBST was proposed.
It helps increasing in 3% the fault coverage by testing critical Hardly
Functionally Testable Faults not covered by conventional SBST patterns.
An automatic functional test pattern generation exploiting an evolutionary algorithm
maximizing metrics related to stress, power, and fault coverage was employed
in the above-mentioned approaches to quickly generate the desired patterns. The
approaches were evaluated on two industrial cases developed by STMicroelectronics;
8051-based and a 32-bit Power Architecture SoCs. Results show that generation
time was reduced upto 75% in comparison to older methodologies while
increasing significantly the desired metrics.
3. Fault Injection in GPGPU: Fault injection mechanisms in semiconductor devices
are suitable for generating structural patterns, testing and activating mitigation techniques,
and validating robust hardware and software applications. GPGPUs are
known for fast parallel computation used in high performance computing and advanced
driver assistance where reliability is the key point. Moreover, GPGPU manufacturers
do not provide design description code due to content secrecy. Therefore,
commercial fault injectors using the GPGPU model is unfeasible, making radiation
tests the only resource available, but are costly. In the last part of this thesis, we
propose a software implemented fault injector able to inject bit-flip in memory elements
of a real GPGPU. It exploits a software debugger tool and combines the
C-CUDA grammar to wisely determine fault spots and apply bit-flip operations in
program variables. The goal is to validate robust parallel algorithms by studying
fault propagation or activating redundancy mechanisms they possibly embed. The
effectiveness of the tool was evaluated on two robust applications: redundant parallel
matrix multiplication and floating point Fast Fourier Transform
Exploring the Mysteries of System-Level Test
System-level test, or SLT, is an increasingly important process step in
today's integrated circuit testing flows. Broadly speaking, SLT aims at
executing functional workloads in operational modes. In this paper, we
consolidate available knowledge about what SLT is precisely and why it is used
despite its considerable costs and complexities. We discuss the types or
failures covered by SLT, and outline approaches to quality assessment, test
generation and root-cause diagnosis in the context of SLT. Observing that the
theoretical understanding for all these questions has not yet reached the level
of maturity of the more conventional structural and functional test methods, we
outline new and promising directions for methodical developments leveraging on
recent findings from software engineering.Comment: 7 pages, 2 figure
New techniques for functional testing of microprocessor based systems
Electronic devices may be affected by failures, for example due to physical defects. These defects may be introduced during the manufacturing process, as well as during the normal operating life of the device due to aging. How to detect all these defects is not a trivial task, especially in complex systems such as processor cores. Nevertheless, safety-critical applications do not tolerate failures, this is the reason why testing such devices is needed so to guarantee a correct behavior at any time. Moreover, testing is a key parameter for assessing the quality of a manufactured product.
Consolidated testing techniques are based on special Design for Testability (DfT) features added in the original design to facilitate test effectiveness. Design, integration, and usage of the available DfT for testing purposes are fully supported by commercial EDA tools, hence approaches based on DfT are the standard solutions adopted by silicon vendors for testing their devices.
Tests exploiting the available DfT such as scan-chains manipulate the internal state of the system, differently to the normal functional mode, passing through unreachable configurations. Alternative solutions that do not violate such functional mode are defined as functional tests.
In microprocessor based systems, functional testing techniques include software-based self-test (SBST), i.e., a piece of software (referred to as test program) which is uploaded in the system available memory and executed, with the purpose of exciting a specific part of the system and observing the effects of possible defects affecting it. SBST has been widely-studies by the research community for years, but its adoption by the industry is quite recent.
My research activities have been mainly focused on the industrial perspective of SBST. The problem of providing an effective development flow and guidelines for integrating SBST in the available operating systems have been tackled and results have been provided on microprocessor based systems for the automotive domain. Remarkably, new algorithms have been also introduced with respect to state-of-the-art approaches, which can be systematically implemented to enrich SBST suites of test programs for modern microprocessor based systems. The proposed development flow and algorithms are being currently employed in real electronic control units for automotive products.
Moreover, a special hardware infrastructure purposely embedded in modern devices for interconnecting the numerous on-board instruments has been interest of my research as well. This solution is known as reconfigurable scan networks (RSNs) and its practical adoption is growing fast as new standards have been created. Test and diagnosis methodologies have been proposed targeting specific RSN features, aimed at checking whether the reconfigurability of such networks has not been corrupted by defects and, in this case, at identifying the defective elements of the network. The contribution of my work in this field has also been included in the first suite of public-domain benchmark networks
Design-for-delay-testability techniques for high-speed digital circuits
The importance of delay faults is enhanced by the ever increasing clock rates and decreasing geometry sizes of nowadays' circuits. This thesis focuses on the development of Design-for-Delay-Testability (DfDT) techniques for high-speed circuits and embedded cores. The rising costs of IC testing and in particular the costs of Automatic Test Equipment are major concerns for the semiconductor industry. To reverse the trend of rising testing costs, DfDT is\ud
getting more and more important
Infrastructures and Algorithms for Testable and Dependable Systems-on-a-Chip
Every new node of semiconductor technologies provides further miniaturization and higher performances, increasing the number of advanced functions that electronic products can offer. Silicon area is now so cheap that industries can integrate in a single chip usually referred to as System-on-Chip (SoC), all the components and functions that historically were placed on a hardware board. Although adding such advanced functionality can benefit users, the manufacturing process is becoming finer and denser, making chips more susceptible to defects. Today’s very deep-submicron semiconductor technologies (0.13 micron and below) have reached susceptibility levels that put conventional semiconductor manufacturing at an impasse. Being able to rapidly develop, manufacture, test, diagnose and verify such complex new chips and products is crucial for the continued success of our economy at-large. This trend is expected to continue at least for the next ten years making possible the design and production of 100 million transistor chips.
To speed up the research, the National Technology Roadmap for Semiconductors identified in 1997 a number of major hurdles to be overcome. Some of these hurdles are related to test and dependability.
Test is one of the most critical tasks in the semiconductor production process where Integrated Circuits (ICs) are tested several times starting from the wafer probing to the end of production test. Test is not only necessary to assure fault free devices but it also plays a key role in analyzing defects in the manufacturing process. This last point has high relevance since increasing time-to-market pressure on semiconductor fabrication often forces foundries to start volume production on a given semiconductor technology node before reaching the defect densities, and hence yield levels, traditionally obtained at that stage. The feedback derived from test is the only way to analyze and isolate many of the defects in today’s processes and to increase process’s yield.
With the increasing need of high quality electronic products, at each new physical assembly level, such as board and system assembly, test is used for debugging, diagnosing and repairing the sub-assemblies in their new environment. Similarly, the increasing reliability, availability and serviceability requirements, lead the users of high-end products performing periodic tests in the field throughout the full life cycle.
To allow advancements in each one of the above scaling trends, fundamental changes are expected to emerge in different Integrated Circuits (ICs) realization disciplines such as IC design, packaging and silicon process. These changes have a direct impact on test methods, tools and equipment. Conventional test equipment and methodologies will be inadequate to assure high quality levels. On chip specialized block dedicated to test, usually referred to as Infrastructure IP (Intellectual Property), need to be developed and included in the new complex designs to assure that new chips will be adequately tested, diagnosed, measured, debugged and even sometimes repaired.
In this thesis, some of the scaling trends in designing new complex SoCs will be analyzed one at a time, observing their implications on test and identifying the key hurdles/challenges to be addressed. The goal of the remaining of the thesis is the presentation of possible solutions. It is not sufficient to address just one of the challenges; all must be met at the same time to fulfill the market requirements
Ensuring a High Quality Digital Device through Design for Testability
An electronic device is reliable if it is available for use most of the times throughout its life. The reliability can be affected by mishandling and use under abnormal operating conditions. High quality product cannot be achieved without proper verification and testing during the product development cycle. If the design is difficult to test, then it is very likely that most of the faults will not be detected before it is shipped to the customer. This paper describes how product quality can be improved by making the hardware design testable. Various designs for testability techniqueswere discussed. A three bit counter circuit was used to illustrate the benefits of design for testability by using scan chain methodology
Development and analysis of the Software Implemented Fault-Tolerance (SIFT) computer
SIFT (Software Implemented Fault Tolerance) is an experimental, fault-tolerant computer system designed to meet the extreme reliability requirements for safety-critical functions in advanced aircraft. Errors are masked by performing a majority voting operation over the results of identical computations, and faulty processors are removed from service by reassigning computations to the nonfaulty processors. This scheme has been implemented in a special architecture using a set of standard Bendix BDX930 processors, augmented by a special asynchronous-broadcast communication interface that provides direct, processor to processor communication among all processors. Fault isolation is accomplished in hardware; all other fault-tolerance functions, together with scheduling and synchronization are implemented exclusively by executive system software. The system reliability is predicted by a Markov model. Mathematical consistency of the system software with respect to the reliability model has been partially verified, using recently developed tools for machine-aided proof of program correctness
- …