Testing mixed-signal cores: a practical oscillation-based test in an analog macrocell

A formal set of design decisions can aid in using oscillation-based test (OBT) for analog subsystems in SoCs. The goal is to offer designers testing options that do not have significant area overhead, performance degradation, or test time. This work shows that OBT is a potential candidate for IP providers to use in combination with functional test techniques. We have shown how to modify the basic concept of OBT to come up with a practical method. Using our approach, designers can use OBT to pave the way for future developments in SoC testing, and it is simple to extend this idea to BIST.European Union 2635

On-chip evaluation of oscillation-based-test output signals for switched-capacitor circuits

This work presents a simple and low-cost method for on-chip evaluation of test signals coming from the application of the Oscillation-Based-Test (OBT) technique. This method extracts the main test signal features (amplitude, frequency and DC level) in the digital domain requiring just a very simple and robust circuitry. Experimental results obtained from an integrated chip demonstrate the feasibility of the approac

A Remote Electricity Billing System

Electric power distribution is the most valuable part of electrical power system in the process of delivering electricity to consumer. Electric power companies are now-a-days adopting some advanced systems such as computer aided monitoring control and management of electric power, so that it can provide better services to electric consumers. This project results an approach to automate the electricity billing system. The concept of prepaid is one of the emerging fields for the paid service providers. The concept is becoming so popular because it has so many advantages. The services like electricity, gas, water telephone etc are now days get privatized. The service provider company some time incurs heavy losses due to non collection of bills. These service items cannot be recovered from the user after providing, so the concept of prepaid reduce risk and increase profitability. Also the bill collection infrastructure is not necessary which intern increase improve the efficiency of the service providing companies. The concept of prepaid starts in the manual form by receiving advance deposits but now due to the revolution of IT and electronics industry the manual recharging process is replaced with automatic and electronic recharging. The recharging methods can be with wire based like telephone line and also by using wireless technology like radio and bluetooth communication. The prepaid system is designed with a smart technology using microcontroller and the recharging process is by some method of communication. The Mobile based recharging is very attractive recharging system. The recharging can be done from any remote place without accessing the energy meter physically. This concept of remote charging makes the system more flexible

Designing sound : procedural audio research based on the book by Andy Farnell

In procedural media, data normally acquired by measuring something, commonly described as sampling, is replaced by a set of computational rules (procedure) that defines the typical structure and/or behaviour of that thing. Here, a general approach to sound as a definable process, rather than a recording, is developed. By analysis of their physical and perceptual qualities, natural objects or processes that produce sound are modelled by digital Sounding Objects for use in arts and entertainments. This Thesis discusses different aspects of Procedural Audio introducing several new approaches and solutions to this emerging field of Sound Design.Em Media Procedimental, os dados os dados normalmente adquiridos através da medição de algo habitualmente designado como amostragem, são substituídos por um conjunto de regras computacionais (procedimento) que definem a estrutura típica, ou comportamento, desse elemento. Neste caso é desenvolvida uma abordagem ao som definível como um procedimento em vez de uma gravação. Através da análise das suas características físicas e perceptuais , objetos naturais ou processos que produzem som, são modelados como objetos sonoros digitais para utilização nas Artes e Entretenimento. Nesta Tese são discutidos diferentes aspectos de Áudio Procedimental, sendo introduzidas várias novas abordagens e soluções para o campo emergente do Design Sonoro

Compact information technology enabled systems for intelligent process monitoring

The use of computers in industrial process applications is ever-increasing. Initially used to provide help to the machine operator, their application has evolved through automatic process control to monitoring of process health and performance. The latter, together with the quality control of the end product directly affect plant economics and ultimately the financial viability of the company. The research reported in this thesis is a contribution towards providing a cost-effective method of calculating a measure of the current health of a process and predicting any maintenance issues that may arise in the near future. Embedded systems are utilised and the monitoring system is designed to work automatically with a minimal input from the operator. This eliminates the need for peripherals such as keyboards, mice, and monitors thus reducing the overall system price and footprint. User interfaces are provided via the Internet and mobile phones giving remote access to multiple users. Single chip microcontrollers are at the heart of the embedded system rather than microprocessors, thereby reducing the relative system cost and size at the expense of localised processing power. The microcontrollers are distributed in a hierarchical network to attain the required processing power whilst minimising data storage and communications and to improve signal-to-noise ratios. The Controller Area Network (CAN) bus was selected, and used for the inter-microcontroller communications, for its robust performance in noisy environments. In the developed system architecture, each microcontroller node acquires one of the required process sensor signals and applies initial signal processing. A novel sweeping filter technique is developed to perform frequency analysis using the microcontrollers. The processed data from all nodes are then combined using situation-based criteria to reach conclusions often not evident from single sensor data. The Internet-based system is provided with the capability to upload any monitoring software or updates. Plug & play capability of the monitoring nodes is also provided so that the system can be seamlessly adapted to new or changed applications. The design and development of the system are detailed along with its deployment on various applications. Fault detection, isolation, and prediction were achieved on batch and continuous processes. A machine tool application proved the frequency analysis and network traffic reduction capabilities. On-line monitoring of an industrial valve was also performed

Sizing, dynamic modelling and control of a solar water pumping system for irrigation

This thesis describes the sizing, dynamic modelling, and control of an automatic solar irrigation pumping system with energy storage for extraction of groundwater for irrigation utilizing an alternative source of energy. The system design is based on site data of an existing project in Bangladesh. Sizing estimation, sensitivity analysis, and optimization are done in HOMER. MATLAB simulation is performed for all alternative types of energy storage systems to study the dynamic behaviors of system components. A water level sensor observes the tank water level and a programmed sensor module measures the temperature, humidity, soil moisture level and send the information to ESP32 microcontroller. Based on the information and boundary conditions, the microcontroller decides either to start or to stop the pump motor and sends results to the web server so that the user can see that. The user can operate the irrigation system far from the field by a simple click on a cellphone. This research also provides a comparative study among all alternative systems as well as the conventional diesel engine system from the economic point of view to give an optimal solution of an automated solar irrigation pumping system with energy storage

Spin-scanning Cameras for Planetary Exploration: Imager Analysis and Simulation

In this thesis, a novel approach to spaceborne imaging is investigated, building upon the scan imaging technique in which camera motion is used to construct an image. This thesis investigates its use with wide-angle (≥90° field of view) optics mounted on spin stabilised probes for large-coverage imaging of planetary environments, and focusses on two instruments. Firstly, a descent camera concept for a planetary penetrator. The imaging geometry of the instrument is analysed. Image resolution is highest at the penetrator’s nadir and lowest at the horizon, whilst any point on the surface is imaged with highest possible resolution when the camera’s altitude is equal to that point’s radius from nadir. Image simulation is used to demonstrate the camera’s images and investigate analysis techniques. A study of stereophotogrammetric measurement of surface topography using pairs of descent images is conducted. Measurement accuracies and optimum stereo geometries are presented. Secondly, the thesis investigates the EnVisS (Entire Visible Sky) instrument, under development for the Comet Interceptor mission. The camera’s imaging geometry, coverage and exposure times are calculated, and used to model the expected signal and noise in EnVisS observations. It is found that the camera’s images will suffer from low signal, and four methods for mitigating this – binning, coaddition, time-delay integration and repeat sampling – are investigated and described. Use of these methods will be essential if images of sufficient signal are to be acquired, particularly for conducting polarimetry, the performance of which is modelled using Monte Carlo simulation. Methods of simulating planetary cameras’ images are developed to facilitate the study of both cameras. These methods enable the accurate simulation of planetary surfaces and cometary atmospheres, are based on Python libraries commonly used in planetary science, and are intended to be readily modified and expanded for facilitating the study of a variety of planetary cameras

Proceedings of the Second International Mobile Satellite Conference (IMSC 1990)

Presented here are the proceedings of the Second International Mobile Satellite Conference (IMSC), held June 17-20, 1990 in Ottawa, Canada. Topics covered include future mobile satellite communications concepts, aeronautical applications, modulation and coding, propagation and experimental systems, mobile terminal equipment, network architecture and control, regulatory and policy considerations, vehicle antennas, and speech compression

An investigation into a DSP implementation of partial response signaling for 4800 bits per second full-duplex data communications over M.1020 telephone lines

Includes bibliographical references.This thesis investigates high-speed digital transmission over a conditioned, voice-grade telephone circuit (M.1020), using a technique known as partial response signaling, or PRS. In particular, the case where 4800 bps, full-duplex transmission is required in a CCI'PT V. 22 type format is investigated. The main v.22 criterion to be adhered to, is that frequency-division multiplexing (FDM) is to be used as the means of separating thetransmit and receive channels. The carrier frequencies should be 1200 Hz and 2400 Hz respectively. The investigation concerns the modulation and demodulation sections only