Simulation modeling of tool delivery system in a machining line

This paper describes an industrial project aiming to enhance the existing simulation modeling suites used at a car engine factory in the UK. The company continues to enhance its simulation modeling capabilities towards so called the `total plant modeling' which not only covers the production facilities but also key ancillary facilities. Tool delivery is one such ancillary process. The existing modeling practices at the company are limited to modeling tool changes and assume that tools meet their expected life and the replacement is always available. In reality, the tools are not always reaching the expected life, the facilities in the tool crib are a limiting resource and the tool inventory has to be minimized. The tool delivery system developed in this project has specific features that model how the tool crib operates, how tools are supplied to the machining lines and various operating strategie

Advances in Repurposing and Recycling of Post-Vehicle-Application Lithium-Ion Batteries

Increased electrification of vehicles has increased the use of lithium-ion batteries for energy storage, and raised the issue of what to do with post-vehicle-application batteries. Three possibilities have been identified: 1) remanufacturing for intended reuse in vehicles; 2) repurposing for non-vehicle, stationary storage applications; and 3) recycling, extracting the precious metals, chemicals and other byproducts. Advances in repurposing and recycling are presented, along with a mathematical model that forecasts the manufacturing capacity needed for remanufacturing, repurposing, and recycling. Results obtained by simulating the model show that up to a 25% reduction in the need for new batteries can be achieved through remanufacturing, that the sum of repurposing and remanufacturing capacity is approximately constant across various scenarios encouraging the sharing of resources, and that the need for recycling capacity will be significant by 2030. A repurposing demonstration shows the use of post-vehicle-application batteries to support a semi-portable recycling platform. Energy is collected from solar panels, and dispensed to electrical devices as required. Recycling may be complicated: lithium-ion batteries produced by different manufacturers contain different active materials, particularly for the cathodes. In all cases, however, the collecting foils used in the anodes are copper, and in the cathodes are aluminum. A common recycling process using relatively low acid concentrations, low temperatures, and short time periods was developed and demonstrated

Flat-plate solar array project. Volume 8: Project analysis and integration

Project Analysis and Integration (PA&I) performed planning and integration activities to support management of the various Flat-Plate Solar Array (FSA) Project R&D activities. Technical and economic goals were established by PA&I for each R&D task within the project to coordinate the thrust toward the National Photovoltaic Program goals. A sophisticated computer modeling capability was developed to assess technical progress toward meeting the economic goals. These models included a manufacturing facility simulation, a photovoltaic power station simulation and a decision aid model incorporating uncertainty. This family of analysis tools was used to track the progress of the technology and to explore the effects of alternative technical paths. Numerous studies conducted by PA&I signaled the achievement of milestones or were the foundation of major FSA project and national program decisions. The most important PA&I activities during the project history are summarized. The PA&I planning function is discussed and how it relates to project direction and important analytical models developed by PA&I for its analytical and assessment activities are reviewed

Life cycle assessment (LCA) applied to the process industry: a review

Purpose : Life cycle assessment (LCA) methodology is a well-established analytical method to quantify environmental impacts, which has been mainly applied to products. However, recent literature would suggest that it has also the potential as an analysis and design tool for processes, and stresses that one of the biggest challenges of this decade in the field of process systems engineering (PSE) is the development of tools for environmental considerations. Method : This article attempts to give an overview of the integration of LCA methodology in the context of industrial ecology, and focuses on the use of this methodology for environmental considerations concerning process design and optimization. Results : The review identifies that LCA is often used as a multi-objective optimization of processes: practitioners use LCA to obtain the inventory and inject the results into the optimization model. It also shows that most of the LCA studies undertaken on process analysis consider the unit processes as black boxes and build the inventory analysis on fixed operating conditions. Conclusions : The article highlights the interest to better assimilate PSE tools with LCA methodology, in order to produce a more detailed analysis. This will allow optimizing the influence of process operating conditions on environmental impacts and including detailed environmental results into process industry

Electricity from photovoltaic solar cells: Flat-Plate Solar Array Project final report. Volume VI: Engineering sciences and reliability

The Flat-Plate Solar Array (FSA) Project, funded by the U.S. Government and managed by the Jet Propulsion Laboratory, was formed in 1975 to develop the module/array technology needed to attain widespread terrestrial use of photovoltaics by 1985. To accomplish this, the FSA Project established and managed an Industry, University, and Federal Government Team to perform the needed research and development. This volume of the series of final reports documenting the FSA Project deals with the Project's activities directed at developing the engineering technology base required to achieve modules that meet the functional, safety and reliability requirements of large-scale terrestrial photovoltaic systems applications. These activities included: (1) development of functional, safety, and reliability requirements for such applications; (2) development of the engineering analytical approaches, test techniques, and design solutions required to meet the requirements; (3) synthesis and procurement of candidate designs for test and evaluation; and (4) performance of extensive testing, evaluation, and failure analysis to define design shortfalls and, thus, areas requiring additional research and development. During the life of the FSA Project, these activities were known by and included a variety of evolving organizational titles: Design and Test, Large-Scale Procurements, Engineering, Engineering Sciences, Operations, Module Performance and Failure Analysis, and at the end of the Project, Reliability and Engineering Sciences. This volume provides both a summary of the approach and technical outcome of these activities and provides a complete Bibliography (Appendix A) of the published documentation covering the detailed accomplishments and technologies developed

A framework for documenting and analyzing life-cycle costs using a simple network based representation

The introduction of high reliability systems combined with new ways of operating complex systems, particularly in aircraft design and operation has received much attention in recent years. Some systems are now being introduced into service, however, justifying such systems on a financial basis is difficult and may act to limit the rate of introduction on new products. Conventional life cycle costing based on a hierarchical cost breakdown structure is poor at recording and analysing the cost implications of introducing new technologies that have effects that span more than one phase in the life cycle. There is a risk that too much emphasis is put on ‘faith’ that a candidate technology will reduce cost because the cost analysis methods lack descriptive and analytical power. We describe an approach to representing the costs associated with introducing new technologies and evaluating their total cost. Our aim was to facilitate the comparison of different technological choices in new product development, with a particular interest in how the perceived benefits of enhanced reliability systems can be shown in a way that is inclusive, objective and easy to understand

Continuous maintenance and the future – Foundations and technological challenges

High value and long life products require continuous maintenance throughout their life cycle to achieve required performance with optimum through-life cost. This paper presents foundations and technologies required to offer the maintenance service. Component and system level degradation science, assessment and modelling along with life cycle ‘big data’ analytics are the two most important knowledge and skill base required for the continuous maintenance. Advanced computing and visualisation technologies will improve efficiency of the maintenance and reduce through-life cost of the product. Future of continuous maintenance within the Industry 4.0 context also identifies the role of IoT, standards and cyber security

The Seedling Sanctuary: Automated Cold Frame for Gardner Elementary

The purpose of this report is to provide the details of the Seedling Sanctuary, a mechanical engineering senior design project. The project in question is an automated cold frame designed specifically for Gardner Academy, a local elementary school in San Jose. A cold frame is a miniature greenhouse that opens like a chest and is made from clear plastic. Automated ventilation and watering systems create a microclimate within this greenhouse structure to create the ideal growing conditions for seeds. The main purposes of the cold frame are to lengthen the growing season, be maintenance free, and enhance garden education. From testing, the project goals were verified to have been achieved through several performance metrics. First, the system’s ability to lengthen the growing season is dependent on germinating seedlings that can be planted earlier in the season. The automated system maintained the seedlings at the proper soil moisture levels to grow. The system also implemented passive temperature control systems to maintain the plants in ideal conditions. With the ventilation and thermal mass, the system is able to be cooler at the hottest times of day and warmer at night than unprotected plants. The system has also successfully automated the care of the seedlings, achieving our goal of being maintenance free. Finally, the enhancement of garden education was incorporated through community engagement with the design and building of the cold frame, as well as the Bluetooth application which will be used in the school curriculum