Bit Rate Control for Real-time Multipoint Video Conferencing

With the rapid development of video compression and network technology, real-time video communications has become a popular part of our daily life. Rate control is needed to satisfy the expectation of high quality and to make it possible to transmit over limited bandwidth. The objective of this thesis is to design a rate control scheme for a real-time Transcoding-Compositing Multipoint Video Conferencing System, which operates exclusively in the DCT domain. In this Transcoding-Compositing system, the mode of the composited frame should firstly be decided before encoding the composited image. A mode decision method relying on Karhunen-Loeve scene change detection is proposed. A new linear source Rate-Distortion model is developed in the - domain ( is the percentage of zero), based on which rate control scheme is designed. The designed rate control scheme is parted into three levels: Frame Level, Sub-frame Level, and Macroblock Level. Frame Level rate control decides the bit budget for each frame based on the buffer fullness. Sub-frame Level rate control optimizes the distribution of the bit budget among the decimated sub-images. Based on the linear source model, Macroblock Level rate control carries out an adaptive procedure to precisely control the number of encoding bits for each sub-image

Algorithms & implementation of advanced video coding standards

Advanced video coding standards have become widely deployed coding techniques used in numerous products, such as broadcast, video conference, mobile television and blu-ray disc, etc. New compression techniques are gradually included in video coding standards so that a 50% compression rate reduction is achievable every five years. However, the trend also has brought many problems, such as, dramatically increased computational complexity, co-existing multiple standards and gradually increased development time. To solve the above problems, this thesis intends to investigate efficient algorithms for the latest video coding standard, H.264/AVC. Two aspects of H.264/AVC standard are inspected in this thesis: (1) Speeding up intra4x4 prediction with parallel architecture. (2) Applying an efficient rate control algorithm based on deviation measure to intra frame. Another aim of this thesis is to work on low-complexity algorithms for MPEG-2 to H.264/AVC transcoder. Three main mapping algorithms and a computational complexity reduction algorithm are focused by this thesis: motion vector mapping, block mapping, field-frame mapping and efficient modes ranking algorithms. Finally, a new video coding framework methodology to reduce development time is examined. This thesis explores the implementation of MPEG-4 simple profile with the RVC framework. A key technique of automatically generating variable length decoder table is solved in this thesis. Moreover, another important video coding standard, DV/DVCPRO, is further modeled by RVC framework. Consequently, besides the available MPEG-4 simple profile and China audio/video standard, a new member is therefore added into the RVC framework family. A part of the research work presented in this thesis is targeted algorithms and implementation of video coding standards. In the wide topic, three main problems are investigated. The results show that the methodologies presented in this thesis are efficient and encourage

Efficient HEVC-based video adaptation using transcoding

In a video transmission system, it is important to take into account the great diversity of the network/end-user constraints. On the one hand, video content is typically streamed over a network that is characterized by different bandwidth capacities. In many cases, the bandwidth is insufficient to transfer the video at its original quality. On the other hand, a single video is often played by multiple devices like PCs, laptops, and cell phones. Obviously, a single video would not satisfy their different constraints. These diversities of the network and devices capacity lead to the need for video adaptation techniques, e.g., a reduction of the bit rate or spatial resolution. Video transcoding, which modifies a property of the video without the change of the coding format, has been well-known as an efficient adaptation solution. However, this approach comes along with a high computational complexity, resulting in huge energy consumption in the network and possibly network latency. This presentation provides several optimization strategies for the transcoding process of HEVC (the latest High Efficiency Video Coding standard) video streams. First, the computational complexity of a bit rate transcoder (transrater) is reduced. We proposed several techniques to speed-up the encoder of a transrater, notably a machine-learning-based approach and a novel coding-mode evaluation strategy have been proposed. Moreover, the motion estimation process of the encoder has been optimized with the use of decision theory and the proposed fast search patterns. Second, the issues and challenges of a spatial transcoder have been solved by using machine-learning algorithms. Thanks to their great performance, the proposed techniques are expected to significantly help HEVC gain popularity in a wide range of modern multimedia applications

Adaptive mode decision with residual motion compensation for distributed video coding

Distributed video coding (DVC) is a coding paradigm that entails low complexity encoding by exploiting the source statistics at the decoder. To improve the DVC coding efficiency, this paper presents a novel adaptive technique for mode decision to control and take advantage of skip mode and intra mode in DVC initially proposed by Luong et al. in 2013. The adaptive mode decision (AMD) is not only based on quality of key frames but also the rate of Wyner-Ziv (WZ) frames. To improve noise distribution estimation for a more accurate mode decision, a residual motion compensation is proposed to estimate a current noise residue based on a previously decoded frame. The experimental results, integrating AMD in two efficient DVC codecs, show that the proposed AMD DVC significantly improves the rate distortion performance without increasing the encoding complexity. For a GOP size of 2 on the set of six test sequences, the average (Bjontegaard) bitrate saving of the proposed codec is 35.5. on WZ frames compared with the DISCOVER codec. This saving is mainly achieved by AMD

Scalable and network aware video coding for advanced communications over heterogeneous networks

This thesis was submitted for the degree of Doctor of Philosophy and was awarded by Brunel UniversityThis work addresses the issues concerned with the provision of scalable video services over heterogeneous networks particularly with regards to dynamic adaptation and user’s acceptable quality of service. In order to provide and sustain an adaptive and network friendly multimedia communication service, a suite of techniques that achieved automatic scalability and adaptation are developed. These techniques are evaluated objectively and subjectively to assess the Quality of Service (QoS) provided to diverse users with variable constraints and dynamic resources. The research ensured the consideration of various levels of user acceptable QoS The techniques are further evaluated with view to establish their performance against state of the art scalable and non-scalable techniques. To further improve the adaptability of the designed techniques, several experiments and real time simulations are conducted with the aim of determining the optimum performance with various coding parameters and scenarios. The coding parameters and scenarios are evaluated and analyzed to determine their performance using various types of video content and formats. Several algorithms are developed to provide a dynamic adaptation of coding tools and parameters to specific video content type, format and bandwidth of transmission. Due to the nature of heterogeneous networks where channel conditions, terminals, users capabilities and preferences etc are unpredictably changing, hence limiting the adaptability of a specific technique adopted, a Dynamic Scalability Decision Making Algorithm (SADMA) is developed. The algorithm autonomously selects one of the designed scalability techniques basing its decision on the monitored and reported channel conditions. Experiments were conducted using a purpose-built heterogeneous network simulator and the network-aware selection of the scalability techniques is based on real time simulation results. A technique with a minimum delay, low bit-rate, low frame rate and low quality is adopted as a reactive measure to a predicted bad channel condition. If the use of the techniques is not favoured due to deteriorating channel conditions reported, a reduced layered stream or base layer is used. If the network status does not allow the use of the base layer, then the stream uses parameter identifiers with high efficiency to improve the scalability and adaptation of the video service. To further improve the flexibility and efficiency of the algorithm, a dynamic de-blocking filter and lambda value selection are analyzed and introduced in the algorithm. Various methods, interfaces and algorithms are defined for transcoding from one technique to another and extracting sub-streams when the network conditions do not allow for the transmission of the entire bit-stream

Motion correlation based low complexity and low power schemes for video codec

制度:新 ; 報告番号:甲3750号 ; 学位の種類:博士(工学) ; 授与年月日:2012/11/19 ; 早大学位記番号:新6121Waseda Universit

Video CODEC with adaptive frame rate control for intelligent transportation system applications

Video cameras are one of the important types of devices in Intelligent Transportation Systems (ITS). The camera images are practical, widely deployable and beneficial for traffic management and congestion control. The advent of image processing has established several applications based on ITS camera images, including vehicle detection, weather monitoring, smart work zones, etc. Unlike digital video entertainment applications, the camera images in ITS applications require high video image quality but usually not a high video frame rate. Traditional block-based video compression standards, which were developed primarily with the video entertainment industry in mind, are dependent on adaptive rate control algorithms to control the video quality and the video frame rate. Modern rate control algorithms range from simple frame skipping to complicated adaptive algorithms based on optimal rate-distortion theory. In this dissertation, I presented an innovative video frame rate control scheme based on adaptive frame dropping. Video transmission schemes were also discussed and a new strategy to reduce the video traffic on the network was presented. Experimental results in a variety of network scenarios shown that the proposed technique could improve video quality in both the temporal and spatial dimensions, as quantified by standard video metrics (up to 6 percent of PSNR, 5 percent of SSIM, and 10 percent VQM compared to the original video). Another benefit of the proposed technique is that video traffic and network congestion are generally reduced. Both FPGA and embedded Linux implementations are considered for video encoder development