Novel Manufacturing Methods and Materials for UHF RFID Tags in Identification and Sensing Applications

The continuously increasing amount of radio frequency identification tags needed in our daily lives, not forgetting the broadly widening concept of the Internet of Things, sets high demands on the tag materials selection and manufacturing processes. The huge amount of needed tags requires environmentally sustainable material selection together with the requirement of very low cost. In addition, the manufacturing capacity needs to be very high, hence high-volume capable production methods are needed. In addition to identification applications, also sensing applications established with radio frequency identification tags are of great interest in many application fields.This thesis reports the possibilities of radio frequency identification tags manufactured on eco-friendly substrate materials using conductive inks and photonic sintering. The used manufacturing methods use raw materials efficiently. Especially brush-painting together with photonic sintering is capable for low-cost high-volume manufacturing. In addition, the possibilities of radio frequency identification tags for humidity sensing applications are studied.The results of this thesis confirmed that the materials and processes studied in this thesis are suitable for environmentally friendly low-cost radio frequency identification tag manufacturing. Especially brush-painting of regular screen printing conductive inks, both silver and copper oxide ink, on wood and cardboard substrates combined with photonic sintering confirmed to be a very good choice for the application area focused in this thesis. Furthermore, especially the use of screen printable copper oxide ink for identification applications is a very low-cost possibility. The results showed that humidity sensing with passive ultra-high frequency radio frequency identification tags, which were manufactured with regular screen printing silver ink on wood substrate without any coating on the tag, is a very promising approach

Index to 1981 NASA Tech Briefs, volume 6, numbers 1-4

Short announcements of new technology derived from the R&D activities of NASA are presented. These briefs emphasize information considered likely to be transferrable across industrial, regional, or disciplinary lines and are issued to encourage commercial application. This index for 1981 Tech Briefs contains abstracts and four indexes: subject, personal author, originating center, and Tech Brief Number. The following areas are covered: electronic components and circuits, electronic systems, physical sciences, materials, life sciences, mechanics, machinery, fabrication technology, and mathematics and information sciences

NASA Tech Briefs, July 1990

Topics include: New Product Ideas; NASA TU Services; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences; Life Sciences

Parts, Materials, and Processes Experience Summary

The ALERT program, a system for communicating common problems with parts, materials, and processes, is condensed and catalogued. Expanded information on selected topics is provided by relating the problem area (failure) to the cause, the investigations and findings, the suggestions for avoidance (inspections, screening tests, proper part applications), and failure analysis procedures. The basic objective of ALERT is the avoidance of the recurrence of parts, materials, and processed problems, thus improving the reliability of equipment produced for and used by the government

National Educators' Workshop: Update 1993. Standard Experiments in Engineering Materials Science and Technology

This document contains a collection of experiments presented and demonstrated at the National Educators' Workshop: Update 93 held at the NASA Langley Research Center in Hampton, Virginia, on November 3-5, 1993. The experiments related to the nature and properties of engineering materials and provided information to assist in teaching about materials in the education community

NASA Tech Briefs, December 1988

This month's technical section includes forecasts for 1989 and beyond by NASA experts in the following fields: Integrated Circuits; Communications; Computational Fluid Dynamics; Ceramics; Image Processing; Sensors; Dynamic Power; Superconductivity; Artificial Intelligence; and Flow Cytometry. The quotes provide a brief overview of emerging trends, and describe inventions and innovations being developed by NASA, other government agencies, and private industry that could make a significant impact in coming years. A second bonus feature in this month's issue is the expanded subject index that begins on page 98. The index contains cross-referenced listings for all technical briefs appearing in NASA Tech Briefs during 1988

NASA Tech Briefs, Fall 1980

Topics include: NASA TU Services: Technology Utilization services that can assist you in learning about and applying NASA technology; New Product Ideas: A summary of selected innovatio.ns of value to manufacturers for the development of new products; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Life Sciences; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences

TLC : une architecture photovoltaïque concentrée (CPV) au potentiel d’efficacité élevé à faible coût

Abstract: Human civilization has grown dependent on ready access to low-cost energy, but the fossil fuels that currently meet the bulk of humanity’s energy needs are causing environmental destruction, including potentially catastrophic global warming. Solar energy has to potential to halt global warming, and, if low enough in cost, to also bring the whole world’s population to a first world living standard. Silicon PV has dramatically reduced costs largely through decreasing the cost and increasing the efficiency of the silicon cells, but silicon is nearing its theoretical efficiency limits, and even if the cells were free, silicon PV would still be too expensive to meet these goals. Tandem CPV cells are roughly twice as efficient as silicon, but previous CPV designs have been unable to compete with silicon on cost in spite of the efficiency advantage. A new CPV architecture, called TLC for its trough, lens and cone concentration stages, proposed using initial concentration by a low-cost trough mirror to shrink the rest of an CPV module by 40X and thus reduce overall module costs. But before this PhD research project, TLC was only a paper study. This PhD research project was started to answer the question of whether TLC could work out as well as it appeared, or whether there were hidden flaws that precluded beating silicon PV on cost, or possibly even precluded TLC from working at all. Thesis chapter 3 details the main optical design aspects, and chapter 4 covers the design of the rest of the TLC module, including leading variations where there is more than one plausible way to achieve low cost and high reliability. The work included building a unified analytical model spreadsheet that linked known aspects of the TLC design together and estimated costs for a given design variation. Thesis chapter 5 covers the economics of the proposed design, with a focus on materials costs since these dominate PV overall costs, and a section on reliability since product lifetime strongly influences life-cycle cost. The work included building 3D-CAD models to refine the TLC design, and then the prototyping of individual parts and processes, and finally building a physical prototype of a TLC mini-module and putting it in sun. This physical confirmation was necessary because even after TLC has been “built” many times, in visualization, on paper, on spreadsheets, and then in COMSOL, until TLC was physically built, hidden flaws could arise at any time. Chapter 6 of this thesis covers the simulation and validation carried out to show that it is plausible that TLC can meet its cost targets. The conclusion of this thesis summarizes the overall project. The project was a success, producing a TLC design with high potential efficiency, very low materials cost, and low estimated process costs, with the potential to beat even the US Department of Energy’s goal for PV pricing in 2030. Ray-tracing a 3D model showed that the design could achieve high concentration with adequate acceptance angles, and tests showed that the prototyping cells were suitable for TLC’s massively parallel microcell-array receiver configuration. The project also successfully tested the proposed manufacturing process for molding semi-dense arrays of tertiary optical elements on the back of a lens tile and assembled a TLC mini module which was tested on sun at the focus of a trough mirror. Four papers have already been published, with a fifth paper accepted, as result of this work.La civilisation humaine est devenue de plus en plus dépendante d'un accès facile à une énergie à faible coût, mais les combustibles fossiles qui répondent actuellement à la majeure partie des besoins énergétiques de l'humanité causent la destruction de l'environnement, y compris un réchauffement climatique potentiellement catastrophique. L'énergie solaire a le potentiel d'arrêter le réchauffement climatique et, si son coût est suffisamment bas, d'amener également la population mondiale entière à un niveau de vie du premier monde. Les coûts de photovoltaïque (PV) à base de silicium ont été considérablement réduits en grande partie en diminuant le prix et en augmentant l'efficacité des cellules en silicium, cependant l’utilisation de silicium a ses limites d'efficacité théoriques, et même si les cellules étaient gratuites, la PV à base de silicium serait encore trop chère pour atteindre ces objectifs. Les cellules de photovoltaïque concentré (CPV) Tandem sont environ deux fois plus efficaces que celles à base de silicium, mais malgré l'avantage de leur efficacité, les architectures des années précédentes de CPV n'ont pas été en mesure de rivaliser avec le silicium en termes de coût. Une nouvelle architecture CPV, appelée TLC (Trough-Lens-Cone) utilise la concentration initiale par un miroir parabolique à faible coût combiné avec un module CPV de 40X et ainsi réduire les coûts globaux du module. Avant ce projet de recherche de doctorat, TLC n'était qu'une étude sur papier. Cette thèse a pour but de répondre à la question de savoir si l’approche TLC pouvait fonctionner aussi bien qu'elle était apparue, ou s'il y avait des défauts cachés qui empêchaient de battre le silicium PV sur le coût, ou pourrait même empêcher la TLC de fonctionner. Ce travail comprenait la construction d'un modèle de tableur unifié qui reliait les aspects connus de la conception TLC et les coûts estimés pour une variation de conception donnée. Nous présentons également la construction de modèles 3D-CAD pour raffiner la conception TLC, puis le prototypage de pièces individuelles et de processus, et enfin la construction d'un prototype physique d'un mini-module TLC qui est mis au soleil. Cette validation physique était nécessaire car même après que TLC ait été théoriquement et numériquement « construit » à plusieurs reprises soit, en visualisation, sur papier, sur des feuilles de calcul, puis dans COMSOL, avant que TLC soit physiquement construit, des défauts cachés pouvaient survenir à tout moment. La mise en œuvre de ce projet a réussi, produisant une conception TLC cohérente qui avait un rendement élevé avec un coût des matériaux très bas et des faibles coûts estimatifs de processus, avec un potentiel de battre même l’objectif du département américain de l'énergie pour la tarification du silicium photovoltaïque en 2030. Le suivi de raies (Ray-tracing) avec un modèle 3D a montré que la conception pouvait atteindre une concentration élevée avec des angles d'acceptation adéquats. Les tests ont également montré que les cellules de prototypage ont été bien adaptées à la nouvelle configuration de TLC de récepteur à matrice de microcellules massivement parallèle. Le projet a également testé avec succès le processus de fabrication proposé pour le moulage de réseaux semi-denses d'éléments optiques tertiaires à l'arrière d'un carreau de lentille. Le projet a également réussi à assembler un mini-module TLC et à tester sous le soleil avec le focus d'un miroir parabolique. Quatre articles ont déjà été publiés, avec un cinquième article accepté, à la suite de ce travail

NASA Tech Briefs, Summer 1976

Topics covered include: Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Life Sciences; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences. Also included are; NASA TU Services: Technology Utilization services that can assist you in learning about and applying NASA technology; and New Product Ideas: A summary of selected innovations of value to manufacturers for the development of new products

NASA patent abstracts bibliography: A continuing bibliography. Section 2: Indexes (supplement 06)

For abstract, see N75-20149