3,661 research outputs found
On some spectral properties of TanDEM-X interferograms over forested areas
This letter reports about some obervations over rainforest (in Brazil and Indonesia), where the spectra of TanDEM-X interferograms show distinct features, almost a signature, which is explained and modelled in terms of the scattering properties.
Supported by comparisons with simulations, the observations exclude any homogeneous, horizontally-layered forest; instead, they are compatible with a model with point scatterers clustered in clouds. Such a model, with high extinction and large gaps that allow significant penetration, is able to explain to a good degree the observations
NASA/JPL Aircraft SAR Workshop Proceedings
Speaker-supplied summaries of the talks given at the NASA/JPL Aircraft SAR Workshop on February 4 and 5, 1985, are provided. These talks dealt mostly with composite quadpolarization imagery from a geologic or ecologic prespective. An overview and summary of the system characteristics of the L-band synthetic aperture radar (SAR) flown on the NASA CV-990 aircraft are included as supplementary information. Other topics ranging from phase imagery and interferometric techniques classifications of specific areas, and the potentials and limitations of SAR imagery in various applications are discussed
Radiative transfer theory for polarimetric remote sensing of pine forest
The radiative transfer theory is applied to interpret polarimetric radar backscatter from pine forest with clustered vegetation structures. To take into account the clustered structures with the radiative transfer theory, the scattering function of each cluster is calculated by incorporating the phase interference of scattered fields from each component. Subsequently, the resulting phase matrix is used in the radiative transfer equations to evaluate the polarimetric backscattering coefficients from random medium layers embedded with vegetation clusters. Upon including the multi-scale structures, namely, trunks, primary and secondary branches, as well as needles, we interpret and simulate the polarimetric radar responses from pine forest for different frequencies and looking angles. The preliminary results are shown to be in good agreement with the measured backscattering coefficients at the Landes maritime pine forest during the MAESTRO-1 experiment
Extrapolation of Airborne Polarimetric and Interferometric SAR Data for Validation of Bio-Geo-Retrieval Algorithms for Future Spaceborne SAR Missions
Spaceborne SAR system concepts and mission design is often based on algorithms developed and the experience gathered
from airborne SAR experiments and associated dedicated campaigns. However, airborne SAR systems have better
performance parameters than their future space-borne counterparts as their design is not impacted by mass, power, and
storage constraints.
This paper describes a methodology to extrapolate spaceborne quality SAR image products from long wavelength airborne
polarimetric SAR data which were acquired especially for the development and validation of bio/geo-retrieval algorithms in
forested regions. For this purpose not only system (sensor) related parameters are altered, but also those relating to the
propagation path (ionosphere) and to temporal decorrelation
Active microwave users working group program planning
A detailed programmatic and technical development plan for active microwave technology was examined in each of four user activities: (1) vegetation; (2) water resources and geologic applications, and (4) oceanographic applications. Major application areas were identified, and the impact of each application area in terms of social and economic gains were evaluated. The present state of knowledge of the applicability of active microwave remote sensing to each application area was summarized and its role relative to other remote sensing devices was examined. The analysis and data acquisition techniques needed to resolve the effects of interference factors were reviewed to establish an operational capability in each application area. Flow charts of accomplished and required activities in each application area that lead to operational capability were structured
Recommended from our members
Electromagnetic Scattering Models for InSAR Correlation Measurements of Vegetation and Snow
Interferometric Synthetic Aperture Radar (InSAR) has proved successful and efficient in measuring the vertical structure of the distributed targets such as vegetation and snow, which are dominated by volume scattering. In particular, the InSAR correlation measurement has been utilized to retrieve the target vertical structural information. One existing and well-known electromagnetic scattering model of the InSAR correlation was first brought forward focusing on the single-pass InSAR observation of a sparse random medium like vegetation. However, the lack of the adaption of this InSAR scattering model for repeat-pass InSAR observation of vegetation as well as for single-pass InSAR observation of snow by considering its dense medium characteristics, essentially constrain fully exploiting InSAR\u27s capability of measuring sparse and dense medium characteristics.
In this work, the well-known InSAR scattering model will be adapted to accommodate the two scenarios: 1) repeat-pass InSAR observation of vegetation and 2) single-pass InSAR observation of snow and considering its dense medium characteristics. Theoretical model derivations as well as parameter retrieval approaches are demonstrated for both of the applications, respectively. Both of the simulated and ground validation results are also presented. The InSAR scattering models along with the parameter retrieval analysis described in this work will expand InSAR\u27s capability as well as the range of vegetation and snow characteristics that can be retrieved by single-pass and/or repeat-pass InSAR systems
FIREX mission requirements document for renewable resources
The initial experimental program and mission requirements for a satellite synthetic aperture radar (SAR) system FIREX (Free-Flying Imaging Radar Experiment) for renewable resources is described. The spacecraft SAR is a C-band and L-band VV polarized system operating at two angles of incidence which is designated as a research instrument for crop identification, crop canopy condition assessments, soil moisture condition estimation, forestry type and condition assessments, snow water equivalent and snow wetness assessments, wetland and coastal land type identification and mapping, flood extent mapping, and assessment of drainage characteristics of watersheds for water resources applications. Specific mission design issues such as the preferred incidence angles for vegetation canopy measurements and the utility of a dual frequency (L and C-band) or dual polarization system as compared to the baseline system are addressed
Estimation of Forest Biomass From Two-Level Model Inversion of Single-Pass InSAR Data
A model for aboveground biomass estimation from single-pass interferometric synthetic aperture radar (InSAR) data is presented. Forest height and canopy density estimates Delta h and eta(0), respectively, obtained from two-level model (TLM) inversion, are used as biomass predictors. Eighteen bistatic VV-polarized TanDEM-X (TDM) acquisitions are used, made over two Swedish test sites in the summers of 2011, 2012, and 2013 (nominal incidence angle: 41 degrees; height-of-ambiguity: 32-63 m). Remningstorp features a hemiboreal forest in southern Sweden, with flat topography and where 32 circular plots have been sampled between 2010 and 2011 (area: 0.5 ha; biomass: 42-242 t/ha; height: 14-32 m). Krycklan features a boreal forest in northern Sweden, 720-km north-northeast from Remningstorp, with significant topography and where 31 stands have been sampled in 2008 (area: 2.4-26.3 ha; biomass: 23-183 t/ha; height: 7-21 m). A high-resolution digital terrain model has been used as ground reference during InSAR processing. For the aforementioned plots and stands and if the same acquisition is used for model training and validation, the new model explains 65%-89% of the observed variance, with root-mean-square error (RMSE) of 12%-19% (median: 15%). By fixing two of the three model parameters, accurate biomass estimation can also be done when different acquisitions or different test sites are used for model training and validation, with RMSE of 12%-56% (median: 17%). Compared with a simple scaling model computing biomass from the phase center elevation above ground, the proposed model shows significantly better performance in Remningstorp, as it accounts for the large canopy density variations caused by active management. In Krycklan, the two models show similar performance
Assessment of underlying topography and forest height inversion based on TomoSAR methods
Due to the strong penetrability, long-wavelength synthetic aperture radar (SAR) can provide an opportunity to reconstruct the three-dimensional structure of the penetrable media. SAR tomography (TomoSAR) technology can resynthesize aperture perpendicular to the slant-range direction and then obtain the tomographic profile consisting of power distribution of different heights, providing a powerful technical tool for reconstructing the three-dimensional structure of the penetrable ground objects. As an emerging technology, it is different from the traditional interferometric SAR (InSAR) technology and has advantages in reconstructing the three-dimensional structure of the illuminated media. Over the past two decades, many TomoSAR methods have been proposed to improve the vertical resolution, aiming to distinguish the locations of different scatters in the unit pixel. In order to cope with the forest mission of European Space Agency (ESA) that is designed to provide P-band SAR measurements to determine the amount of biomass and carbon stored in forests, it is necessary to systematically evaluate the performance of forest height and underlying topography inversion using TomoSAR technology. In this paper, we adopt three typical algorithms, namely, Capon, Multiple Signal Classification (MUSIC), and Compressed Sensing (CS), to evaluate the performance in forest height and underlying topography inversion. The P-band airborne full-polarization (FP) SAR data of Lopè National Park in the AfriSAR campaign implemented by ESA in 2016 is adopted to verify the experiment. Furthermore, we explore the effects of different baseline designs and filter methods on the reconstruction of the tomographic profile. The results show that a better tomographic profile can be obtained by using Hamming window filter and Capon algorithm in uniform baseline distribution and a certain number of acquisitions. Compared with LiDAR results, the root-mean-square error (RMSE) of forest height and underlying topography obtained by Capon algorithm is 2.17 m and 1.58 m, which performs the best among the three algorithms
Basic studies in microwave remote sensing
Scattering models were developed in support of microwave remote sensing of earth terrains with particular emphasis on model applications to airborne Synthetic Aperture Radar measurements of forest. Practically useful surface scattering models based on a solution of a pair of integral equations including multiple scattering effects were developed. Comparisons of these models with controlled scattering measurements from statistically known random surfaces indicate that they are valid over a wide range of frequencies. Scattering models treating a forest environment as a two and three layered media were also developed. Extensive testing and comparisons were carried out with the two layered model. Further studies with the three layered model are being carried out. A volume scattering model valid for dense media such as a snow layer was also developed that shows the appropriate trend dependence with the volume fraction of scatterers
- …