On periodically pendulum-diven systems for underactuated locomotion: a viscoelastic jointed model

This paper investigates the locomotion principles and nonlinear dynamics of the periodically pendulum-driven (PD) systems using the case of a 2-DOF viscoelastic jointed model. As a mechanical system with underactuation degree one, the proposed system has strongly coupled nonlinearities and can be utilized as a potential benchmark for studying complicated PD systems. By mathematical modeling and non-dimensionalization of the physical system, an insight is obtained to the global system dynamics. The proposed 2-DOF viscoelastic jointed model establishes a commendable interconnection between the system dynamics and the periodically actuated force. Subsequently, the periodic locomotion principles of the actuated subsystem are elaborately studied and synthesized with the characteristic of viscoelastic element. Then the analysis of qualitative changes is conducted respectively under the varying excitation amplitude and frequency. Simulation results validate the efficiency and performance of the proposed system comparing with the conventional system

Application of Stable Inversion to Flexible Manipulators Modeled by the ANCF

Compared to conventional robots, flexible manipulators offer many advantages, such as faster end-effector velocities and less energy consumption. However, their flexible structure can lead to undesired oscillations. Therefore, the applied control strategy should account for these elasticities. A feedforward controller based on an inverse model of the system is an efficient way to improve the performance. However, unstable internal dynamics arise for many common flexible robots and stable inversion must be applied. In this contribution, an approximation of the original stable inversion approach is proposed. The approximation simplifies the problem setup, since the internal dynamics do not need to be derived explicitly for the definition of the boundary conditions. From a practical point of view, this makes the method applicable to more complex systems with many unactuated degrees of freedom. Flexible manipulators modeled by the absolute nodal coordinate formulation (ANCF) are considered as an application example

Design, fabrication and control of soft robots

Conventionally, engineers have employed rigid materials to fabricate precise, predictable robotic systems, which are easily modelled as rigid members connected at discrete joints. Natural systems, however, often match or exceed the performance of robotic systems with deformable bodies. Cephalopods, for example, achieve amazing feats of manipulation and locomotion without a skeleton; even vertebrates such as humans achieve dynamic gaits by storing elastic energy in their compliant bones and soft tissues. Inspired by nature, engineers have begun to explore the design and control of soft-bodied robots composed of compliant materials. This Review discusses recent developments in the emerging field of soft robotics.National Science Foundation (U.S.) (Grant IIS-1226883

Whole-Body MPC for a Dynamically Stable Mobile Manipulator

Autonomous mobile manipulation offers a dual advantage of mobility provided by a mobile platform and dexterity afforded by the manipulator. In this paper, we present a whole-body optimal control framework to jointly solve the problems of manipulation, balancing and interaction as one optimization problem for an inherently unstable robot. The optimization is performed using a Model Predictive Control (MPC) approach; the optimal control problem is transcribed at the end-effector space, treating the position and orientation tasks in the MPC planner, and skillfully planning for end-effector contact forces. The proposed formulation evaluates how the control decisions aimed at end-effector tracking and environment interaction will affect the balance of the system in the future. We showcase the advantages of the proposed MPC approach on the example of a ball-balancing robot with a robotic manipulator and validate our controller in hardware experiments for tasks such as end-effector pose tracking and door opening

Optimal Control for Articulated Soft Robots

Soft robots can execute tasks with safer interactions. However, control techniques that can effectively exploit the systems' capabilities are still missing. Differential dynamic programming (DDP) has emerged as a promising tool for achieving highly dynamic tasks. But most of the literature deals with applying DDP to articulated soft robots by using numerical differentiation, in addition to using pure feed-forward control to perform explosive tasks. Further, underactuated compliant robots are known to be difficult to control and the use of DDP-based algorithms to control them is not yet addressed. We propose an efficient DDP-based algorithm for trajectory optimization of articulated soft robots that can optimize the state trajectory, input torques, and stiffness profile. We provide an efficient method to compute the forward dynamics and the analytical derivatives of series elastic actuators (SEA)/variable stiffness actuators (VSA) and underactuated compliant robots. We present a state-feedback controller that uses locally optimal feedback policies obtained from DDP. We show through simulations and experiments that the use of feedback is crucial in improving the performance and stabilization properties of various tasks. We also show that the proposed method can be used to plan and control underactuated compliant robots, with varying degrees of underactuation effectively.Comment: 14 pages, 15 figures, IEEE Transaction on Robotics (TRO

Model Based Control of Soft Robots: A Survey of the State of the Art and Open Challenges

Continuum soft robots are mechanical systems entirely made of continuously deformable elements. This design solution aims to bring robots closer to invertebrate animals and soft appendices of vertebrate animals (e.g., an elephant's trunk, a monkey's tail). This work aims to introduce the control theorist perspective to this novel development in robotics. We aim to remove the barriers to entry into this field by presenting existing results and future challenges using a unified language and within a coherent framework. Indeed, the main difficulty in entering this field is the wide variability of terminology and scientific backgrounds, making it quite hard to acquire a comprehensive view on the topic. Another limiting factor is that it is not obvious where to draw a clear line between the limitations imposed by the technology not being mature yet and the challenges intrinsic to this class of robots. In this work, we argue that the intrinsic effects are the continuum or multi-body dynamics, the presence of a non-negligible elastic potential field, and the variability in sensing and actuation strategies.Comment: 69 pages, 13 figure

Oscillation Damping Control of Pendulum-like Manipulation Platform using Moving Masses

This paper presents an approach to damp out the oscillatory motion of the pendulum-like hanging platform on which a robotic manipulator is mounted. To this end, moving masses were installed on top of the platform. In this paper, asymptotic stability of the platform (which implies oscillation damping) is achieved by designing reference acceleration of the moving masses properly. A main feature of this work is that we can achieve asymptotic stability of not only the platform, but also the moving masses, which may be challenging due to the under-actuation nature. The proposed scheme is validated by the simulation studies.Comment: IFAC Symposium on Robot Control (SYROCO) 201

Modelling and control of an elastically joint-actuated cart-pole underactuated system

This paper investigates the modelling and closedloop tracking control issues of a novel elastic underactuated multibody system. A torsional inverted pendulum cart-pole system with a single rotary actuator at the pivot of the cart is proposed. The system dynamics which incorporates with motion planning is firstly described. An optimization procedure is then discussed to plan the feasible trajectories that not just meet the performance requirements but also obtain optimality with respect to the cart displacement and average velocity. A closed-loop tracking controller is designed under collocated partial feedback linearization (CPFL). Subsequent presentation of simulation demonstrates that the proposed system is promising as compared to the previous work. The paper concludes with the application of our novel scheme to the design and control of autonomous robot systems