Study of Novel Power Semiconductor Devices for Performance and Reliability.

Power Semiconductor Devices are crucial components in present day power electronic systems. The performance and efficiency of the devices have a direct correlation with the power system efficiency. This dissertation will examine some of the components that are commonly used in a power system, with emphasis on their performance characteristics and reliability. In recent times, there has a proliferation of charge balance devices in high voltage discrete power devices. We examine the same charge balance concept in a fast recovery diode and a MOSFET. This is crucial in the extending system performance at compact dimensions. At smaller device and system sizes, the performance trade-off between the ON and OFF states becomes all the more critical. The focus on reducing the switching losses while maintaining system reliability increases. In a conventional planar technology, the technology places a limit on the switching performance owing to the larger die sizes. Using a charge balance structure helps achieve the improved trade-off, while working towards ultimately improving system reliability, size and cost. Chapter 1 introduces the basic power system based on an inductive switching circuit, and the various components that determine its efficiency. Chapter 2 presents a novel Trench Fast Recovery Diode (FRD) structure with injection control is proposed in this dissertation. The proposed structure achieves improved carrier profile without the need for excess lifetime control. This substantially improves the device performance, especially at extreme temperatures (-40oC to 175oC). The device maintains low leakage at high temperatures, and it\u27s Qrr and Irm do not degrade as is the usual case in heavily electron radiated devices. A 1600 diode using this structure has been developed, with a low forward turn-on voltage and good reverse recovery properties. The experimental results show that the structure maintains its performance at high temperatures. In chapter 3, we develop a termination scheme for the previously mentioned diode. A major limitation on the performance of high voltage power semiconductor is the edge termination of the device. It is critical to maintain the breakdown voltage of the device without compromising the reliability of the device by controlling the surface electric field. A good termination structure is critical to the reliability of the power semiconductor device. The proposed termination uses a novel trench MOS with buried guard ring structure to completely eliminate high surface electric field in the silicon region of the termination. The termination scheme was applied towards a 1350 V fast recovery diode, and showed excellent results. It achieved 98% of parallel plane breakdown voltage, with low leakage and no shifts after High Temperature Reverse Bias testing due to mobile ion contamination from packaging mold compound. In chapter 4, we also investigate the device physics behind a superjunction MOSFET structure for improved robustness. The biggest issue with a completely charge balanced MOSFET is decreased robustness in an Unclamped Inductive Switching (UIS) Circuit. The equally charged P and N pillars result in a flat electric field profile, with the peak carrier density closer to the P-N junction at the surface. This results in an almost negligible positive dynamic Rds-on effect in the MOSFET. By changing the charge profile of the P-column, either by increasing it completely or by implementing a graded profile with the heavier P on top, we can change the field profile and shift the carrier density deeper into silicon, increasing the positive dynamic Rds-on effect. Simulation and experimental results are presented to support the theory and understanding. Chapter 5 summarizes all the theories presented and the contributions made by them in the field. It also seeks to highlight future work to be done in these areas

Study and development of a fluorescence based sensor system for monitoring oxygen in wine production: The WOW project

The importance of oxygen in the winemaking process is widely known, as it affects the chemical aspects and therefore the organoleptic characteristics of the final product. Hence, it is evident the usefulness of a continuous and real-time measurements of the levels of oxygen in the various stages of the winemaking process, both for monitoring and for control. The WOW project (Deployment of WSAN technology for monitoring Oxygen in Wine products) has focused on the design and the development of an innovative device for monitoring the oxygen levels in wine. This system is based on the use of an optical fiber to measure the luminescent lifetime variation of a reference metal/porphyrin complex, which decays in presence of oxygen. The developed technology results in a high sensitivity and low cost sensor head that can be employed for measuring the dissolved oxygen levels at several points inside a wine fermentation or aging tank. This system can be complemented with dynamic modeling techniques to provide predictive behavior of the nutrient evolution in space and time given few sampled measuring points, for both process monitoring and control purposes. The experimental validation of the technology has been first performed in a controlled laboratory setup to attain calibration and study sensitivity with respect to different photo-luminescent compounds and alcoholic or non-alcoholic solutions, and then in an actual case study during a measurement campaign at a renown Italian winery

Miniaturized Silicon Photodetectors

Silicon (Si) technologies provide an excellent platform for the design of microsystems where photonic and microelectronic functionalities are monolithically integrated on the same substrate. In recent years, a variety of passive and active Si photonic devices have been developed, and among them, photodetectors have attracted particular interest from the scientific community. Si photodiodes are typically designed to operate at visible wavelengths, but, unfortunately, their employment in the infrared (IR) range is limited due to the neglectable Si absorption over 1100 nm, even though the use of germanium (Ge) grown on Si has historically allowed operations to be extended up to 1550 nm. In recent years, significant progress has been achieved both by improving the performance of Si-based photodetectors in the visible range and by extending their operation to infrared wavelengths. Near-infrared (NIR) SiGe photodetectors have been demonstrated to have a “zero change” CMOS process flow, while the investigation of new effects and structures has shown that an all-Si approach could be a viable option to construct devices comparable with Ge technology. In addition, the capability to integrate new emerging 2D and 3D materials with Si, together with the capability of manufacturing devices at the nanometric scale, has led to the development of new device families with unexpected performance. Accordingly, this Special Issue of Micromachines seeks to showcase research papers, short communications, and review articles that show the most recent advances in the field of silicon photodetectors and their respective applications

Photodetectors

In this book some recent advances in development of photodetectors and photodetection systems for specific applications are included. In the first section of the book nine different types of photodetectors and their characteristics are presented. Next, some theoretical aspects and simulations are discussed. The last eight chapters are devoted to the development of photodetection systems for imaging, particle size analysis, transfers of time, measurement of vibrations, magnetic field, polarization of light, and particle energy. The book is addressed to students, engineers, and researchers working in the field of photonics and advanced technologies

High efficiency and high frequency resonant tunneling diode sources

Terahertz (THz) technology has been generating a lot of interest due to the numerous potential applications for systems working in this previously unexplored frequency range. THz radiation has unique properties suited for high capacity communication systems and non-invasive, non-ionizing properties that when coupled with a fairly good spatial resolution are unparalleled in its sensing capabilities for use in biomedical, industrial and security fields. However, in order to achieve this potential, effective and efficient ways of generating THz radiation are required. Devices which exhibit negative differential resistance (NDR) in their current-voltage (I – V) characteristics can be used for the generation of these radio frequency (RF) signals. Among them, the resonant tunnelling diode (RTD) is considered to be one of the most promising solid-state sources for millimeter and submillimeter wave radiation, which can operate at room temperature. However, the main limitations of RTD oscillators are producing high output power and increasing the DC-to-RF conversion efficiency. Although oscillation frequencies of up to 1.98 THz have been already reported, the output power is in the range of micro-Watts and conversion efficiencies are under 1 %. This thesis describes the systematic work done on the design, fabrication, and characterization of RTD-based oscillators in monolithic microwave/millimeter-wave integrated circuits (MMIC) that can produce high output power and have a high conversion efficiency at the same time. At the device level, parasitic oscillations caused by the biasing line inductance when the diode is biased in the NDR region prevents accurate characterization and compromises the maximum RF power output. In order to stabilise the NDR devices, a common method is the use of a suitable resistor connected across the device, to make the differential resistance in the NDR region positive. However, this approach severely hinders the diode’s performance in terms of DC-to-RF conversion efficiency. In this work, a new DC bias decoupling circuit topology has been developed to enable accurate, direct measurements of the device’s NDR characteristic and when implemented in an oscillator design provides over a 10-fold improvement in DC-to-RF conversion efficiency. The proposed method can be adapted for higher frequency and higher power devices and could have a major impact with regards to the adoption of RTD technology, especially for portable devices where power consumption must be taken into consideration. RF and DC characterization of the device were used in the realization on an accurate large-signal model of the RTD. S-parameter measurements were used to determine an accurate small-signal model for the device’s capacitance and inductance, while the extracted DC characteristics where used to replicate the I-V characteristics. The model is able to replicate the non-stable behavior of RTD devices when biased in the NDR region and the RF characteristics seen in oscillator circuits. It is expected that the developed model will serve in future optimization processes of RTD devices in millimeter and submillimeter wave applications. Finally, a wireless data transmission link operating in the Ka-band (26.5 GHz – – 40 GHz) using two RTDs operating as a transmitter and receiver is presented in this thesis. Wireless error-free data transfer of up to 2 gigabits per second (Gbit/s) was achieved at a transmission distance of 15 cm. In summary, this work makes important contributions to the accurate characterization, and modeling of RTDs and demonstrates the feasibility of this technology for use in future portable wireless communication systems and imaging setups

Optimization of Signal-to-Noise Ratio in Semiconductor Sensors via On-Chip Signal Amplification and Interface-Induced Noise Suppression.

Radiation detectors are now used in a large variety of fields in science and technology, and the number of applications is growing continually. This thesis presents the development of a wide band-gap solid state photomultiplier (SSPM) and the performance improvement of Si radiation detector with respect to noise suppression and resolution enhancement. Recently developed advanced scintillators, which have the ability to distinguish gamma-ray interaction events from those that accompany neutron impact, require improved quantum efficiency in the blue or near UV region of the spectrum. We utilize AlGaAs photodiode elements as components in a wide band-gap SSPM as a lower-cost, lower logistical burden and higher quantum efficiency replacement for the photomultiplier tube (PMT). We demonstrate that the diodes are responsive to blue and near UV in both linear and breakdown modes with robust electrical characteristics, which includes the leakage current and the onset of breakdown against geometric alteration in the diode design. For semiconductor direct-conversion radiation detectors, we investigated the performance enhancement of the detector via the suppression of noise induced from the semiconductor interface and the resolution improvement with on-chip amplification. The properties of the phonon-based noise are studied and methods to quench the charge mobility fluctuation via surface control, evaluating acoustic reflectance at the semiconductor metal interface by calculating reflectance coefficient via the roaming phonon microgradient (RPMG) model. Si radiation detectors are fabricated and the hypotheses evaluated with different geometries and metal types. In addition to the noise suppression, we also sought to increase the device signal by integrating an amplifying junction as part of the detector topology so that the SNR could be maximized. From this research, we demonstrated the feasibility of improving the energy resolution relative to those low-noise designs that don’t possess on-chip amplification by modeling, fabricating, and characterizing proof-of-concept planar and partitioned detectors. From the fabricated detectors, a semi-empirical result shows that the energy resolution for 81 keV gamma-rays can be reduced from 2.12 % to 0.96 % (for a k = 0.2) with a gain of ~8, which shows the best SNR optimization from our modeling.PhDElectrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/111488/1/thnkang_1.pd

Spaceborne sensors (1983-2000 AD): A forecast of technology

A technical review and forecast of space technology as it applies to spaceborne sensors for future NASA missions is presented. A format for categorization of sensor systems covering the entire electromagnetic spectrum, including particles and fields is developed. Major generic sensor systems are related to their subsystems, components, and to basic research and development. General supporting technologies such as cryogenics, optical design, and data processing electronics are addressed where appropriate. The dependence of many classes of instruments on common components, basic R&D and support technologies is also illustrated. A forecast of important system designs and instrument and component performance parameters is provided for the 1983-2000 AD time frame. Some insight into the scientific and applications capabilities and goals of the sensor systems is also given

Some electrical and optical properties of cadmium sulphide

Imperial Users onl

Technology for large space systems: A special bibliography with indexes (supplement 04)

This bibliography lists 259 reports, articles, and other documents introduced into the NASA scientific and technical information system between July 1, 1980 and December 31, 1980. Its purpose is to provide information to the researcher, manager, and designer in technology development and mission design in the area of the Large Space Systems Technology Program. Subject matter is grouped according to systems, interactive analysis and design. Structural concepts, control systems, electronics, advanced materials, assembly concepts, propulsion, solar power satellite systems, and flight experiments