262 research outputs found

    Coordinated Voltage Control in Modern Distribution Systems

    Get PDF
    Modern distribution systems, especially with the presence of distributed generation (DG) and distribution automation are evolving as smart distribution systems. Distribution management systems (DMSs) with communication infrastructure and associated software and hardware developments are integral parts of the smart distribution systems. With such advancement in distribution systems, distribution system voltage and reactive power control are dominant by Volt/VAr (voltage and reactive power) optimisation and utilisation of DG for system Volt/VAr support. It is to be noted that the respective controls and optimisation formulations are typically adopted from primary, secondary and tertiary voltage and reactive power controls at upstream system level. However, the characteristics of modern distribution systems embedded with high penetration of DG are different from transmission systems and the former distribution systems with uni-directional power flow. Also, coordinated control of multiple Volt/VAr support DG units with other voltage control devices such as on-load tap changer (OLTC), line voltage regulators (VRs) and capacitor banks (CBs) is one of the challenging tasks. It is mainly because reverse power flow, caused predominantly by DG units, can influence the operation of conventional voltage control devices. Some of the adverse effects include control interactions, operational conflicts, voltage drop and rise cases at different buses in a network, and oscillatory transients. This research project aimed to carry out in-depth study on coordinated voltage control in modern MV distribution systems utilising DG for system Volt/VAr support. In the initial phase of the research project, an in-depth literature review is conducted and the specific research gaps are identified. The design considerations of the proposed coordinated voltage control, which also uses the concept of virtual time delay, are identified through comprehensive investigations. It emphasises on examining and analysing both steady-state and dynamic phenomena associated with the control interactions among multiple Volt/VAr support DG units and voltage control devices. It would be essential for ensuring effective coordinated voltage control in modern distribution systems. In this thesis, the interactions among multiple DG units and voltage control devices are identified using their simultaneous and non-simultaneous responses for voltage control through time domain simulations. For this task, an analytical technique is proposed and small signal modelling studies have also been conducted. The proposed methodology could be beneficial to distribution network planners and operators to ensure seamless network operation from voltage control perspective with increasing penetration of DG units. Notably, it has been found that the significant interactions among multiple DG units and voltage control devices are possible under conventional standalone, rule-based, and analytics based control strategies as well as with real-time optimal control under certain system conditions. In the second phase of the research project, the proposed coordinated voltage control strategy is elaborated. The control design considerations are fundamentally based on eliminating the adverse effects, which can distinctly be caused by the simultaneous and non-simultaneous responses of multiple Volt/VAr support DG units and voltage control devices. First, the concept of virtual time delay is applied for dynamically managing the control variables of Volt/VAr support DG units and voltage control devices through the proposed control parameter tuning algorithm. Because it has been found that the conventional time-graded operation cannot eliminate the adverse effects of DG-voltage control device interactions under certain system conditions. Secondly, the distinct control strategies are designed and tested for effectively and efficiently coordinating the operation of multiple Volt/VAr support DG units and voltage control devices in real-time. The test results have demonstrated that the proposed coordinated voltage control strategy for modern MV distribution systems can effectively be implemented in real-time using advanced substation centred DMS. The proposed coordinated voltage control strategy presented in this thesis may trigger paradigm shift in the context of voltage control in smart distribution systems. In the final phase of the research project, short-term and/or long-term oscillations which can be possible for a MV distribution system operation embedded with Volt/VAr support DG are discussed. Typically, the short-term oscillations are occurred due to interactions among different DG units and their controllers (i.e., inter-unit electro-mechanical oscillations in synchronous machine based DG units) while the long-term oscillations occurred due to DG-voltage control device interactions. Also, sustained oscillations may occur due to tap changer limit cycle phenomenon. The concept of alert-state voltage control is introduced for mitigating the sustained oscillations subjected to OLTC limit cycles in the presence of high penetration of DG. The investigative studies in this thesis further emphasise the requirements of supplementary control and other mitigating strategies for damping the oscillations in modern active MV distribution systems. The proposed research will pave the way for managing increasing penetration of DG units, with different types, technologies and operational modes, from distribution system voltage control perspective

    Distributed Voltage Control in Distribution Networks with Electric Vehicle Charging Stations and Photovoltaic Generators

    Get PDF
    The developments of distributed generators (DGs) and electric vehicles (EVs) are dramatical due to the rapid increase of friendly environment desire. While on another hand, the proliferation of distributed generators (DGs) and electric vehicle charging stations (EVCSs) has brought voltage regulation challenges to distribution systems due to their high generations and heavy loads. In this thesis, a distributed control strategy is proposed which mainly consisted by a reactive compensation algorithm to dispatch surplus reactive power from DGs and EVCSs for proper voltage regulation without violating their converters’ capacity limits or stressing conventional voltage control devices, i.e., on-load tap changers (OLTCs), and an active power curtailment algorithm for DGs to properly integrate OLTC in voltage regulation when the reactive power compensation is deficient. The proposed control algorithms rely on consensus theory and sensitivity analysis, thus, minimizing the active and reactive powers needed for voltage support, and decreasing the net cost of voltage regulation. In the proposed control strategy, three distributed voltage regulation algorithms, as well as a distributed control method for OLTC, are developed and coordinated to realize adequate voltage maintaining effects. Simulation results of a typical distribution system confirm the effectiveness and robustness of the proposed distributed control strategy in continuously maintaining proper voltage regulation for the whole distribution system with minimum power demands from DGs and EVCSs, and reduced tap operation for OLTC, within every 24 hours

    Distribution voltage control considering the impact of PV generation on tap changers and autonomous regulators

    No full text
    The uptake of variable megawatts from photovoltaics (PV) challenges distribution system operation. The primary problem is significant voltage rise in the feeder that forces existing voltage control devices such as on-load tap-changers and line voltage regulators to operate continuously. The consequence is the deterioration of the operating life of the voltage control mechanism. Also, conventional non-coordinated reactive power control can result in the operation of the line regulator at its control limit (runaway condition). This paper proposes an optimal reactive power coordination strategy based on the load and irradiance forecast. The objective is to minimize the number of tap operations so as not to reduce the operating life of the tap control mechanism and avoid runaway. The proposed objective is achieved by coordinating various reactive power control options in the distribution network while satisfying constraints such as maximum power point tracking of PV and voltage limits of the feeder. The option of voltage support from PV plant is also considered. The problem is formulated as constrained optimization and solved through the interior point technique. The effectiveness of the approach is demonstrated in a realistic distribution network model
    corecore