Coherent receiver design and analysis for interleaved division multiple access (IDMA)

This thesis discusses a new multiuser detection technique for cellular wireless communications. Multiuser communications is critical in cellular systems as multiple terminals (users) transmit to base stations (or wireless infrastructure). Efficient receiver methods are needed to maximise the performance of these links and maximise overall throughput and coverage while minimising inter-cell interference. Recently a new technique, Interleave-Division Multiple Access (IDMA), was developed as a variant of direct-sequence code division multiple access (DS-CDMA). In this new scheme users are separated by user specific interleavers, and each user is allocated a low rate code. As a result, the bandwidth expansion is devoted to the low rate code and not weaker spreading codes. IDMA has shown to have significant performance gains over traditional DS-CDMA with a modest increase in complexity. The literature on IDMA primarily focuses on the design of low rate forward error correcting (FEC) codes, as well as channel estimation. However, the practical aspects of an IDMA receiver such as timing acquisition, tracking, block asynchronous detection, and cellular analysis are rarely studied. The objective of this thesis is to design and analyse practical synchronisation, detection and power optimisation techniques for IDMA systems. It also, for the first time, provides a novel analysis and design of a multi-cell system employing a general multiuser receiver. These tools can be used to optimise and evaluate the performance of an IDMA communication system. The techniques presented in this work can be easily employed for DS-CDMA or other multiuser receiver designs with slight modification. Acquisition and synchronisation are essential processes that a base-station is required to perform before user's data can be detected and decoded. For high capacity IDMA systems, which can be heavily loaded and operate close to the channel capacity, the performance of acquisition and tracking can be severely affected by multiple access interference as well as severe drift. This thesis develops acquisition and synchronisation algorithms which can cope with heavy multiple access interference as well as high levels of drift. Once the timing points have been estimated for an IDMA receiver the detection and decoding process can proceed. An important issue with uplink systems is the alignment of frame boundaries for efficient detection. This thesis demonstrates how a fully asynchronous system can be modelled for detection. This thesis presents a model for the frame asynchronous IDMA system, and then develops a maximum likelihood receiver for the proposed system. This thesis develops tools to analyse and optimise IDMA receivers. The tools developed are general enough to be applied to other multiuser receiver techniques. The conventional EXIT chart analysis of unequal power allocated multiuser systems use an averaged EXIT chart analysis for all users to reduce the complexity of the task. This thesis presents a multidimensional analysis for power allocated IDMA, and shows how it can be utilised in power optimisation. Finally, this work develops a novel power zoning technique for multicell multiuser receivers using the optimised power levels, and illustrates a particular example where there is a 50% capacity improvement using the proposed scheme. -- provided by Candidate

Non-coherent slot synchronization techniques for WCDMA systems

This Thesis investigates a host of new synchronization techniques for WCDMA. We assume the presence of more than one base station (BS) (multi-target) in the vicinity of the mobile station (MS), and consider the effects of multipath, Raleigh fading, and different carrier frequency offsets. Through the Thesis, we concentrate on the first stage of the three-stage cell search procedure which is slot synchronization. The slot synchronization stage has been always the most challenging stage since it deals with the largest amount of uncertainty in the cell search, and it determines the timing resolution to the other two stages. We also introduce the concept of using parallel code verification circuits to be added to the state of art pipelined techniques to yield better synchronization results. The received WCDMA synchronization codes are combined in different scenarios according to the proposed non-coherent synchronization technique. The results are compared with recent approaches of combining the WCDMA synchronization codes. The comparison reveals some improvements in the mean synchronization time for some of our rules herein. It also shows superiority of the new rules for different carrier frequency offsets especially at low signal to interference ratios

Initial Synchronisation in the Multiple-Input Multiple-Output Aided Single- and Multi-Carrier DS-CDMA as well as DS-UWB Downlink

In this thesis, we propose and investigate code acquisition schemes employing both colocated and cooperative Multiple Input/Multiple Output (MIMO) aided Single-Carrier (SC) and Multi-Carrier (MC) Code Division Multiple Access (CDMA) DownLink (DL) schemes. We study their characteristics and performance in terms of both Non-Coherent (NC) and Differentially Coherent (DC) MIMO scenarios. Furthermore, we also propose iterative code acquisition schemes for the Direct Sequence-Ultra WideBand (DS-UWB) DL. There is a paucity of code acquisition techniques designed for transmit diversity aided systems. Moreover, there are no in-depth studies representing the fundamental characteristics of code acquisition schemes employing both co-located and cooperative MIMOs. Hence we investigate both NC and DC code acquisition schemes in the co-located and cooperative MIMO aided SC and MC DS-CDMA DL, when communicating over spatially uncorrelated Rayleigh channels. The issues of NC initial and post-initial acquisition schemes as well as DC schemes are studied as a function of the number of co-located antennas by quantifying the attainable correct detection probability and mean acquisition time performances. The research of DS-UWB systems has recently attracted a significant interest in both the academic and industrial community. In the DS-UWB DL, initial acquisition is required for both coarse timing as well as code phase alignment. Both of these constitute a challenging problem owing to the extremely short chip-duration of UWB systems. This leads to a huge acquisition search space size, which is represented as the product of the number of legitimate code phases in the uncertainty region of the PN code and the number of legitimate signalling pulse positions. Therefore the benefits of the iterative code acquisition schemes are analysed in terms of the achievable correct detection probability and mean acquisition time performances. Hence we significantly reduce the search space size with the aid of a Tanner graph based Message Passing (MP) technique, which is combined with the employment of beneficially selected generator polynomials, multiple receive antennas and appropriately designed multiple-component decoders. Finally, we characterise a range of two-stage iterative acquisition schemes employing iterative MP designed for a multiple receive antenna assisted DS-UWB DL scenario

Adaptive PN code synchronisation in DS-CDMA systems

Spread Spectrum (SS) communication, initially designed for military applications, is now the basis for many of today's advanced communications systems such as Code Division Multiple Access (CDMA), Global Positioning System (GPS), Wireless Local Loop (WLL) , etc. For effective communication to take place in systems using SS modulation, the Pseudo-random Noise (PN) code used at the receiver to despread the received signal must be identical and be synchronised with the PN code that was used to spread the signal at the transmitter. Synchronisation is done in two steps: coarse synchronisation or acquisition, and fine synchronisation or tracking. Acquisition involves obtaining a coarse estimate of the phase shift between the transmitted PN code and that at the receiver so that the received PN code will be aligned or synchronised with the locally generated PN code. After acquisition, tracldng is now done which involves maintaining the alignment of the two PN codes. This thesis presents results of the research calTied out on a proposed adaptive PN code acquisition circuit designed to improve the synchronisation process in Direct Sequence CDMA (DS-CDMA) systems. The acquisition circuit is implemented using a Matched Filter (MF) for the correlation operation and the threshold setting device is an adaptive processor known as the Cell Averaging Constant False Alarm Rate (CA-CFAR) processor. It is a double dwell acquisition circuit where the second dwell is implemented by Post Detection Integration (PDI). Depending on the application, PDI can be used to mitigate the effect of frequency offset in non-coherent detectors and/or in the implementation of multiple dwell acquisition systems. Equations relating the performance measures - the probability of false alarm (Pra ), the probability of detection (P d) and the mean acquisition time (E {Tacq}) - of the circuit are deri ved. Monte Carlo simulation was used for the independent validation of the theoretical results obtained, and the strong agreement between these results shows the accuracy of the derived equations for the proposed circuit. Due to the combination of PDI and CA-CFAR processor in the implementation of the circuit, results obtained show that it can provide a good measure of robustness to frequency offset and noise power variations in mobile environment, consequently leading to improved acquisition time performance. The complete synchronisation circuit is realised by using this circuit in conjunction with a conventional code tracking circuit. Therefore, a study of a Non-coherent Delay-Locked Loop (NDLL) code tracking circuit is also calTied out.EThOS - Electronic Theses Online ServiceGBUnited Kingdo

Timing and Carrier Synchronization in Wireless Communication Systems: A Survey and Classification of Research in the Last 5 Years

Timing and carrier synchronization is a fundamental requirement for any wireless communication system to work properly. Timing synchronization is the process by which a receiver node determines the correct instants of time at which to sample the incoming signal. Carrier synchronization is the process by which a receiver adapts the frequency and phase of its local carrier oscillator with those of the received signal. In this paper, we survey the literature over the last 5 years (2010–2014) and present a comprehensive literature review and classification of the recent research progress in achieving timing and carrier synchronization in single-input single-output (SISO), multiple-input multiple-output (MIMO), cooperative relaying, and multiuser/multicell interference networks. Considering both single-carrier and multi-carrier communication systems, we survey and categorize the timing and carrier synchronization techniques proposed for the different communication systems focusing on the system model assumptions for synchronization, the synchronization challenges, and the state-of-the-art synchronization solutions and their limitations. Finally, we envision some future research directions