Resource efficient redundancy using quorum-based cycle routing in optical networks

In this paper we propose a cycle redundancy technique that provides optical networks almost fault-tolerant point-to-point and multipoint-to-multipoint communications. The technique more importantly is shown to approximately halve the necessary light-trail resources in the network while maintaining the fault-tolerance and dependability expected from cycle-based routing. For efficiency and distributed control, it is common in distributed systems and algorithms to group nodes into intersecting sets referred to as quorum sets. Optimal communication quorum sets forming optical cycles based on light-trails have been shown to flexibly and efficiently route both point-to-point and multipoint-to-multipoint traffic requests. Commonly cycle routing techniques will use pairs of cycles to achieve both routing and fault-tolerance, which uses substantial resources and creates the potential for underutilization. Instead, we intentionally utilize redundancy within the quorum cycles for fault-tolerance such that almost every point-to-point communication occurs in more than one cycle. The result is a set of cycles with 96.60% - 99.37% fault coverage, while using 42.9% - 47.18% fewer resources.Comment: 17th International Conference on Transparent Optical Networks (ICTON), 5-9 July 2015. arXiv admin note: substantial text overlap with arXiv:1608.05172, arXiv:1608.0516

Disaster-Resilient Control Plane Design and Mapping in Software-Defined Networks

Communication networks, such as core optical networks, heavily depend on their physical infrastructure, and hence they are vulnerable to man-made disasters, such as Electromagnetic Pulse (EMP) or Weapons of Mass Destruction (WMD) attacks, as well as to natural disasters. Large-scale disasters may cause huge data loss and connectivity disruption in these networks. As our dependence on network services increases, the need for novel survivability methods to mitigate the effects of disasters on communication networks becomes a major concern. Software-Defined Networking (SDN), by centralizing control logic and separating it from physical equipment, facilitates network programmability and opens up new ways to design disaster-resilient networks. On the other hand, to fully exploit the potential of SDN, along with data-plane survivability, we also need to design the control plane to be resilient enough to survive network failures caused by disasters. Several distributed SDN controller architectures have been proposed to mitigate the risks of overload and failure, but they are optimized for limited faults without addressing the extent of large-scale disaster failures. For disaster resiliency of the control plane, we propose to design it as a virtual network, which can be solved using Virtual Network Mapping techniques. We select appropriate mapping of the controllers over the physical network such that the connectivity among the controllers (controller-to-controller) and between the switches to the controllers (switch-to-controllers) is not compromised by physical infrastructure failures caused by disasters. We formally model this disaster-aware control-plane design and mapping problem, and demonstrate a significant reduction in the disruption of controller-to-controller and switch-to-controller communication channels using our approach.Comment: 6 page

A high-speed optical star network using TDMA and all-optical demultiplexing techniques

The authors demonstrate the use of time-division multiplexing (TDM) to realize a high capacity optical star network. The fundamental element of the demonstration network is a 10 ps, wavelength tunable, low jitter, pulse source. Electrical data is encoded onto three optical pulse trains, and the resultant low duty cycle optical data channels are multiplexed together using 25 ps fiber delay lines. This gives an overall network capacity of 40 Gb/s. A nonlinear optical loop mirror (NOLM) is used to carry out the demultiplexing at the station receiver. The channel to be switched out can be selected by adjusting the phase of the electrical signal used to generate the control pulses for the NOLM. By using external injection into a gain-switched distributed feedback (DFB) laser we are able to obtain very low jitter control pulses of 4-ps duration (RMS jitter <1 ps) after compression of the highly chirped gain switched pulses in a normal dispersive fiber. This enables us to achieve excellent eye openings for the three demultiplexed channels. The difficulty in obtaining complete switching of the signal pulses is presented. This is shown to be due to the deformation of the control pulse in the NOLM (caused by the soliton effect compression). The use of optical time-division multiplexing (OTDM) with all-optical switching devices is shown to be an excellent method to allow us to exploit as efficiently as possible the available fiber bandwidth, and to achieve very high bit-rate optical networks

A SDN-based On-Demand Path Provisioning Approach across Multi-domain Optical Networks

The interconnection of remote datacentres with optical networks are emerging use cases and such orchestration of multi-domains require the design of new network control, management, and orchestration architectures. Such heterogeneity needs to adopt end-to-end services like on-demand path provisioning. It is acknowledged that such scenarios are more complexed and have fundamental limitations in terms of high performance and delay. To address these issues, and as a means to cope with the complexity growth, research in this area is considering the concept of Software-Defined Network (SDN) orchestration for multi-domain optical networks to coordinated the control of heterogeneous systems. This paper presents a SDN path provisioning approach across Multi-Domain Optical Networks. The aim is to develop an efficient on-demand path provisioning platform in a software defined optical network at the control plane to dynamically manage the network's load, especially in emergency scenarios. The proposed distributed system architecture will help to solve the longstanding problem of inter-domain path provisioning. Our proposed architecture is implemented and validated in a control plane testbed to validate the approach. The paper also evaluated the factors such Quality of Service (QoS) of the network deployment associated with delay or control overhead. Our results show that the method will reduce additional delays in a multi-domain optical network, where high capacity and low latency are requirements for data-intensive applications and cloud services. The proposed method also maintains the total number of flows as low as possible to make the algorithm fast and reduce overheads

DYNAMIC ROUTING WITH CROSS-LAYER ADAPTATIONS FOR MULTI-HOP WIRELESS NETWORKS

In recent years there has been a proliferation of research on a number of wireless multi-hop networks that include mobile ad-hoc networks, wireless mesh networks, and wireless sensor networks (WSNs). Routing protocols in such networks are of- ten required to meet design objectives that include a combination of factors such as throughput, delay, energy consumption, network lifetime etc. In addition, many mod- ern wireless networks are equipped with multi-channel radios, where channel selection plays an important role in achieving the same design objectives. Consequently, ad- dressing the routing problem together with cross-layer adaptations such as channel selection is an important issue in such networks. In this work, we study the joint routing and channel selection problem that spans two domains of wireless networks. The first is a cost-effective and scalable wireless-optical access networks which is a combination of high-capacity optical access and unethered wireless access. The joint routing and channel selection problem in this case is addressed under an anycasting paradigm. In addition, we address two other problems in the context of wireless- optical access networks. The first is on optimal gateway placement and network planning for serving a given set of users. And the second is the development of an analytical model to evaluate the performance of the IEEE 802.11 DCF in radio-over- fiber wireless LANs. The second domain involves resource constrained WSNs where we focus on route and channel selection for network lifetime maximization. Here, the problem is further exacerbated by distributed power control, that introduces addi- tional design considerations. Both problems involve cross-layer adaptations that must be solved together with routing. Finally, we present an analytical model for lifetime calculation in multi-channel, asynchronous WSNs under optimal power control