163,025 research outputs found
Effects of energy storage systems grid code requirements on interface protection performances in low voltage networks
The ever-growing penetration of local generation in distribution networks and the large diffusion of energy storage systems (ESSs) foreseen in the near future are bound to affect the effectiveness of interface protection systems (IPSs), with negative impact on the safety of medium voltage (MV) and low voltage (LV) systems. With the scope of preserving the main network stability, international and national grid connection codes have been updated recently. Consequently, distributed generators (DGs) and storage units are increasingly called to provide stabilizing functions according to local voltage and frequency. This can be achieved by suitably controlling the electronic power converters interfacing small-scale generators and storage units to the network. The paper focuses on the regulating functions required to storage units by grid codes currently in force in the European area. Indeed, even if such regulating actions would enable local units in participating to network stability under normal steady-state operating conditions,
it is shown through dynamic simulations that they may increase the risk of unintentional islanding occurrence. This means that dangerous operating conditions may arise in LV networks in case dispersed generators and storage systems are present, even if all the end-users are compliant with currently applied connection standards
Distributed Apportioning in a Power Network for providing Demand Response Services
Greater penetration of Distributed Energy Resources (DERs) in power networks
requires coordination strategies that allow for self-adjustment of
contributions in a network of DERs, owing to variability in generation and
demand. In this article, a distributed scheme is proposed that enables a DER in
a network to arrive at viable power reference commands that satisfies the DERs
local constraints on its generation and loads it has to service, while, the
aggregated behavior of multiple DERs in the network and their respective loads
meet the ancillary services demanded by the grid. The Net-load Management
system for a single unit is referred to as the Local Inverter System (LIS) in
this article . A distinguishing feature of the proposed consensus based
solution is the distributed finite time termination of the algorithm that
allows each LIS unit in the network to determine power reference commands in
the presence of communication delays in a distributed manner. The proposed
scheme allows prioritization of Renewable Energy Sources (RES) in the network
and also enables auto-adjustment of contributions from LIS units with lower
priority resources (non-RES). The methods are validated using
hardware-in-the-loop simulations with Raspberry PI devices as distributed
control units, implementing the proposed distributed algorithm and responsible
for determining and dispatching realtime power reference commands to simulated
power electronics interface emulating LIS units for demand response.Comment: 7 pages, 11 Figures, IEEE International Conference on Smart Grid
Communication
Power quality and electromagnetic compatibility: special report, session 2
The scope of Session 2 (S2) has been defined as follows by the Session Advisory Group and the Technical Committee: Power Quality (PQ), with the more general concept of electromagnetic compatibility (EMC) and with some related safety problems in electricity distribution systems.
Special focus is put on voltage continuity (supply reliability, problem of outages) and voltage quality (voltage level, flicker, unbalance, harmonics). This session will also look at electromagnetic compatibility (mains frequency to 150 kHz), electromagnetic interferences and electric and magnetic fields issues. Also addressed in this session are electrical safety and immunity concerns (lightning issues, step, touch and transferred voltages).
The aim of this special report is to present a synthesis of the present concerns in PQ&EMC, based on all selected papers of session 2 and related papers from other sessions, (152 papers in total). The report is divided in the following 4 blocks:
Block 1: Electric and Magnetic Fields, EMC, Earthing systems
Block 2: Harmonics
Block 3: Voltage Variation
Block 4: Power Quality Monitoring
Two Round Tables will be organised:
- Power quality and EMC in the Future Grid (CIGRE/CIRED WG C4.24, RT 13)
- Reliability Benchmarking - why we should do it? What should be done in future? (RT 15
Recommended from our members
EcoBlock: Grid Impacts, Scaling, and Resilience
Widespread deployment of EcoBlocks has the potential to transform today's electricity system into one that is more resilient, flexible, efficient and sustainable. In this vision, the system will consist of self- su cient, renewable-powered, block-scale entities that can deliberately adjust their net power exchange and can optimize performance, maintain stability, support each other, or disconnect entirely from the grid as needed. This report is intended as an independent analysis of the potential relationships, both constructive and adverse, between EcoBlocks and the grid
Recommended from our members
Every Moment Counts: Synchrophasors for Distribution Networks with Variable Resources
Chapter 34 in the textbook, "Renewable Energy Integration: Practical Management of Variability, Uncertainty and Flexibility
Smart grid architecture for rural distribution networks: application to a Spanish pilot network
This paper presents a novel architecture for rural distribution grids. This architecture is designed to modernize traditional rural networks into new Smart Grid ones. The architecture tackles innovation actions on both the power plane and the management plane of the system. In the power plane, the architecture focuses on exploiting the synergies between telecommunications and innovative technologies based on power electronics managing low scale electrical storage. In the management plane, a decentralized management system is proposed based on the addition of two new agents assisting the typical Supervisory Control And Data Acquisition (SCADA) system of distribution system operators. Altogether, the proposed architecture enables operators to use more effectively—in an automated and decentralized way—weak rural distribution systems, increasing the capability to integrate new distributed energy resources. This architecture is being implemented in a real Pilot Network located in Spain, in the frame of the European Smart Rural Grid project. The paper also includes a study case showing one of the potentialities of one of the principal technologies developed in the project and underpinning the realization of the new architecture: the so-called Intelligent Distribution Power Router.Postprint (published version
- …