Mathematical and computer modeling of electro-optic systems using a generic modeling approach

The conventional approach to modelling electro-optic sensor systems is to develop separate models for individual systems or classes of system, depending on the detector technology employed in the sensor and the application. However, this ignores commonality in design and in components of these systems. A generic approach is presented for modelling a variety of sensor systems operating in the infrared waveband that also allows systems to be modelled with different levels of detail and at different stages of the product lifecycle. The provision of different model types (parametric and image-flow descriptions) within the generic framework can allow valuable insights to be gained

GIS and urban design

Although urban planning has used computer models and information systems sincethe 1950s and architectural practice has recently restructured to the use of computeraideddesign (CAD) and computer drafting software, urban design has hardly beentouched by the digital world. This is about to change as very fine scale spatial datarelevant to such design becomes routinely available, as 2dimensional GIS(geographic information systems) become linked to 3dimensional CAD packages,and as other kinds of photorealistic media are increasingly being fused with thesesoftware. In this chapter, we present the role of GIS in urban design, outlining whatcurrent desktop software is capable of and showing how various new techniques canbe developed which make such software highly suitable as basis for urban design.We first outline the nature of urban design and then present ideas about how varioussoftware might form a tool kit to aid its process. We then look in turn at: utilisingstandard mapping capabilities within GIS relevant to urban design; buildingfunctional extensions to GIS which measure local scale accessibility; providingsketch planning capability in GIS and linking 2-d to 3-d visualisations using low costnet-enabled CAD browsers. We finally conclude with some speculations on thefuture of GIS for urban design across networks whereby a wide range of participantsmight engage in the design process digitally but remotely

Army-NASA aircrew/aircraft integration program (A3I) software detailed design document, phase 3

The capabilities and design approach of the MIDAS (Man-machine Integration Design and Analysis System) computer-aided engineering (CAE) workstation under development by the Army-NASA Aircrew/Aircraft Integration Program is detailed. This workstation uses graphic, symbolic, and numeric prototyping tools and human performance models as part of an integrated design/analysis environment for crewstation human engineering. Developed incrementally, the requirements and design for Phase 3 (Dec. 1987 to Jun. 1989) are described. Software tools/models developed or significantly modified during this phase included: an interactive 3-D graphic cockpit design editor; multiple-perspective graphic views to observe simulation scenarios; symbolic methods to model the mission decomposition, equipment functions, pilot tasking and loading, as well as control the simulation; a 3-D dynamic anthropometric model; an intermachine communications package; and a training assessment component. These components were successfully used during Phase 3 to demonstrate the complex interactions and human engineering findings involved with a proposed cockpit communications design change in a simulated AH-64A Apache helicopter/mission that maps to empirical data from a similar study and AH-1 Cobra flight test

Work domain analysis and intelligent transport systems: Implications for vehicle design

This article presents a Work Domain Analysis (WDA) of the road transport system in Victoria, Australia. A series of driver information requirements and tasks that could potentially be supported through the use of Intelligent Transport Systems (ITS) are then extracted from the WDA. The potential use of ITS technologies to circumvent these information gaps and provide additional support to drivers is discussed. It is concluded that driver information requirements are currently not entirely satisfied by contemporary vehicle design and also that there are a number of driving tasks that could be further supported through the provision of supplementary systems within vehicles

Use of COTS functional analysis software as an IVHM design tool for detection and isolation of UAV fuel system faults

This paper presents a new approach to the development of health management solutions which can be applied to both new and legacy platforms during the conceptual design phase. The approach involves the qualitative functional modelling of a system in order to perform an Integrated Vehicle Health Management (IVHM) design – the placement of sensors and the diagnostic rules to be used in interrogating their output. The qualitative functional analysis was chosen as a route for early assessment of failures in complex systems. Functional models of system components are required for capturing the available system knowledge used during various stages of system and IVHM design. MADe™ (Maintenance Aware Design environment), a COTS software tool developed by PHM Technology, was used for the health management design. A model has been built incorporating the failure diagrams of five failure modes for five different components of a UAV fuel system. Thus an inherent health management solution for the system and the optimised sensor set solution have been defined. The automatically generated sensor set solution also contains a diagnostic rule set, which was validated on the fuel rig for different operation modes taking into account the predicted fault detection/isolation and ambiguity group coefficients. It was concluded that when using functional modelling, the IVHM design and the actual system design cannot be done in isolation. The functional approach requires permanent input from the system designer and reliability engineers in order to construct a functional model that will qualitatively represent the real system. In other words, the physical insight should not be isolated from the failure phenomena and the diagnostic analysis tools should be able to adequately capture the experience bases. This approach has been verified on a laboratory bench top test rig which can simulate a range of possible fuel system faults. The rig is fully instrumented in order to allow benchmarking of various sensing solution for fault detection/isolation that were identified using functional analysis

Map Calculus in GIS: a proposal and demonstration

This paper provides a new representation for fields (continuous surfaces) in Geographical Information Systems (GIS), based on the notion of spatial functions and their combinations. Following Tomlin's (1990) Map Algebra, the term 'Map Calculus' is used for this new representation. In Map Calculus, GIS layers are stored as functions, and new layers can be created by combinations of other functions. This paper explains the principles of Map Calculus and demonstrates the creation of function-based layers and their supporting management mechanism. The proposal is based on Church's (1941) Lambda Calculus and elements of functional computer languages (such as Lisp or Scheme)

Using cognitive work analysis to explore activity allocation within military domains

Cognitive Work Analysis (CWA) is frequently advocated as an approach for the analysis of complex sociotechnical systems. Much of the current CWA literature within the military domain pays particular attention to its initial phases; Work Domain Analysis and Contextual Task Analysis. Comparably, the analysis of the social and organisational constraints receives much less attention. Through the study of a helicopter Mission Planning System (MPS) software tool, this paper describes an approach for investigating the constraints affecting the distribution of work. The paper uses this model to evaluate the potential benefits of the social and organisational analysis phase within a military context. The analysis shows that, through its focus on constraints the approach provides a unique description of the factors influencing the social organisation within a complex domain. This approach appears to be compatible with existing approaches and serves as a validation of more established social analysis techniques

Creating Responsive Information Systems with the Help of SSADM

In this paper, a program for a research is outlined. Firstly, the concept of responsive information systems is defined and then the notion of the capacity planning and software performance engineering is clarified. Secondly, the purpose of the proposed methodology of capacity planning, the interface to information systems analysis and development methodologies (SSADM), the advantage of knowledge-based approach is discussed. The interfaces to CASE tools more precisely to data dictionaries or repositories (IRDS) are examined in the context of a certain systems analysis and design methodology (e.g. SSADM)

Affordances and Safe Design of Assistance Wearable Virtual Environment of Gesture

Safety and reliability are the main issues for designing assistance wearable virtual environment of technical gesture in aerospace, or health application domains. That needs the integration in the same isomorphic engineering framework of human requirements, systems requirements and the rationale of their relation to the natural and artifactual environment.To explore coupling integration and design functional organization of support technical gesture systems, firstly ecological psychologyprovides usa heuristicconcept: the affordance. On the other hand mathematical theory of integrative physiology provides us scientific concepts: the stabilizing auto-association principle and functional interaction.After demonstrating the epistemological consistence of these concepts, we define an isomorphic framework to describe and model human systems integration dedicated to human in-the-loop system engineering.We present an experimental approach of safe design of assistance wearable virtual environment of gesture based in laboratory and parabolic flights. On the results, we discuss the relevance of our conceptual approach and the applications to future assistance of gesture wearable systems engineering