1,016 research outputs found
Interferometric Synthetic Aperture Radar (InSAR) for Fine-resolution Basal Ice Sheet Imaging
This dissertation work was to examine the feasibility of InSAR through the ice sheets to create a fine resolution basal topography map and extraction of basal composition. InSAR was shown to be possible through the ice sheet, using data collected by the MCRDS radar around the NEEM drill site. Reflectivity maps were generated leading to the possibility of extracting useful basal composition data. Extraction of basal composition information was examined including estimating the roughness of basal topography and removing the effects of local slope
Bed topography of Jakobshavn Isbrae, Greenland, and Byrd Glacier, Antarctica
This is the published version. Copyright 2015 International Glaciological SocietyThis paper presents the bed topography of Jakobshavn Isbrae, Greenland, and Byrd Glacier, Antarctica, derived from sounding these glaciers with high-sensitivity radars. To understand the processes causing the speed-up and retreat of outlet glaciers, and to enable the development of next-generation ice-sheet models, we need information on bed topography and basal conditions. To this end, we performed measurements with the progressively improved Multichannel Coherent Radar Depth Sounder/Imager (MCoRDS/I). We processed the data from each antenna-array element using synthetic aperture radar algorithms to improve radar sensitivity and reduce along-track surface clutter. We then applied array and image-processing algorithms to extract the weak bed echoes buried in off-vertical scatter (cross-track surface clutter). At Jakobshavn Isbrae, we observed 2.7 km thick ice âŒ30 km upstream of the calving front and âŒ850 m thick ice at the calving front. We also observed echoes from multiple interfaces near the bed. We applied the MUSIC algorithm to the data to derive the direction of arrival of the signals. This analysis revealed that clutter is dominated by the ice surface at Jakobshavn Isbrae. At Byrd Glacier, we found âŒ3.62 km thick ice, as well as a subglacial trench âŒ3.05 km below sea level. We used ice thickness information derived from radar data in conjunction with surface elevation data to generate bed maps for these two critical glaciers. The performance of current radars must be improved further by âŒ15 dB to fully sound the deepest part of Byrd Glacier. Unmanned aerial systems equipped with radars that can be flown over lines spaced as close as 5 m apart in the cross-track direction to synthesize a two-dimensional aperture would be ideal for collecting fine-resolution data over glaciers like Jakobshavn near their grounding lines
Development and Improvement of Airborne Remote Sensing Radar Platforms
With the recent record ice melt in the Arctic as well as the dramatic changes occurring in the Antarctic, the need and urgency to characterize ice sheets in these regions has become a research thrust of both the NSF and NASA. Airborne remote sensing is the most effective way to collect the necessary data on a large scale with fine resolution. Current models for determining the relationship between the world's great ice sheets and global sea-level are limited by the availability of data on bed topography, glacier volume, internal layers, and basal conditions. This need could be satisfied by equipping long range aircraft with an appropriately sensitive suite of sensors. The goal of this work is to enable two new airborne radar installations for use in cryospheric surveying, and improve these systems as well as future systems by addressing aircraft integration effects on antenna-array performance. An aerodynamic fairing is developed to enable a NASA DC-8 to support a 5-element array for CReSIS's MCoRDS radar, and several structures are also developed to enable a NASA P-3 to support a 15-element MCoRDS array, as well as three other radar antenna-arrays used for cryospheric surveying. Together, these aircraft have flown almost 200 missions and collected 550 TB of unique science data. In addition, a compensation method is developed to improve beamforming and clutter suppression on wing-mounted arrays by mitigating phase center errors due to wing-flexure. This compensation method is applied to the MVDR beamforming algorithm to improve clutter suppression by using element displacement information to apply appropriate phase shifts. The compensation demonstrated an average SINR increase of 5-10 dB. The hardware contributions of this work have substantially contributed to the state-of-the-art for polar remotes sensing, as evidenced by new data sets made available to the science community and widespread use and citation of the data. The investigations of aircraft integration effects on antenna-arrays will improve future data sets by characterizing the performance degradation. The wing-flexure compensation will greatly improve beam formation and clutter suppression. Increased clutter suppression in airborne radars is crucial to improving next generation ice sheet models and sea-level rise predictions
Active microwave sensor technology, chapter 5
The relationship between surface properties and echo characteristics, as determined by radar technology, is discussed; echo enhancement to reduce measurement uncertainty was included. Feasibility data, suggested baseline functional descriptions of various types of active microwave sensors, and examples of existing radar techniques are summarized. Data manage and measurement processes are also covered
Radar mapping of Isunnguata Sermia, Greenland
This is the published version. Copyright 2013 International Glaciological SocietyIce thickness estimates using advanced nadir sounding and tomographic radar processing techniques are compared and combined in a study of Isunnguata Sermia glacier, Greenland. Using an ensemble of Operation IceBridge flight lines spaced at 500 m intervals and running approximately along the flow direction, we find there is a statistically excellent comparison between subglacial terrains derived from two-dimensional tomography and gridded nadir sounding. Analysis shows that tomographic data better capture short wavelength (1â2 km) patterns in basal terrain, but interpolated nadir sounding data yield more spatially extensive and continuous coverage across the glacier, especially in deep subglacial troughs. Using derived surface and basal topography maps, we find that driving stress and measured and modeled surface velocity comparisons indicate that basal sliding is an important component of the glacier motion, but is also only weakly coupled to the detailed bed topography save for the deepest troughs. As might be expected for this land-terminating, relatively slow-moving glacier, the subglacial and proglacial topography is similar, suggesting the erosional processes acting on the modern glacier bed once helped sculpt the now exposed land
Polarimetric airborne scientific instrument, mark 2, an iceâsounding airborne synthetic aperture radar for subglacial 3D imagery
Polarimetric Airborne Scientific INstrument, mark 2 (PASIN2) is a 150 MHz coherent pulsed radar with the purpose of deep ice sounding for bedrock, subglacial channels and ice-water interface detection in Antarctica. It is designed and operated by the British Antarctic Survey from 2014. With multiple antennas, oriented along and across-track, for transmission and reception, it enables polarimetric 3D estimation of the ice base with a single pass, reducing the gridding density of the survey paths. The off-line data processing stream consists of channel calibration; 2D synthetic aperture radar (SAR) imaging based on back-projection, for along-track and range dimensions; and finally, a direction of arrival estimation (DoA) of the remaining across-track angle, by modifying the non-linear MUSIC algorithm. Calibration flights, during the Antarctic Summer campaigns in 16/17 and 19/20 seasons, assessed and validated the instrument and processing performances. Imaging flights over ice streams and ice shelves close to grounding lines demonstrate the 3D sensing capabilities. By resolving directional ambiguities and accounting for reflector across-track location, the true ice thickness and bed elevation are obtained, thereby removing the error of the usual assumption of vertical DoA, that greatly influence the output of flow models of ice dynamics
Polarimetric airborne scientific instrument, mark 2, an iceâsounding airborne synthetic aperture radar for subglacial 3DÂ imagery
Polarimetric Airborne Scientific INstrument, mark 2 (PASIN2) is a 150 MHz coherent
pulsed radar with the purpose of deep ice sounding for bedrock, subglacial channels and
iceâwater interface detection in Antarctica. It is designed and operated by the British
Antarctic Survey from 2014. With multiple antennas, oriented along and acrossâtrack, for
transmission and reception, it enables polarimetric 3D estimation of the ice base with a
single pass, reducing the gridding density of the survey paths. The offâline data processing
stream consists of channel calibration; 2D synthetic aperture radar (SAR) imaging based
on backâprojection, for alongâtrack and range dimensions; and finally, a direction of
arrival estimation (DoA) of the remaining acrossâtrack angle, by modifying the nonâlinear
MUSIC algorithm. Calibration flights, during the Antarctic Summer campaigns in 16/17
and 19/20 seasons, assessed and validated the instrument and processing performances.
Imaging flights over ice streams and ice shelves close to grounding lines demonstrate the
3D sensing capabilities. By resolving directional ambiguities and accounting for reflector
acrossâtrack location, the true ice thickness and bed elevation are obtained, thereby
removing the error of the usual assumption of vertical DoA, that greatly influence the
output of flow models of ice dynamics
- âŠ