9,738 research outputs found
Ion sources for high-power hadron accelerators
Ion sources are a critical component of all particle accelerators. They
create the initial beam that is accelerated by the rest of the machine. This
paper will introduce the many methods of creating a beam for high-power hadron
accelerators. A brief introduction to some of the relevant concepts of plasma
physics and beam formation is given. The different types of ion source used in
accelerators today are examined. Positive ion sources for producing H+ ions and
multiply charged heavy ions are covered. The physical principles involved with
negative ion production are outlined and different types of negative ion
sources are described. Cutting edge ion source technology and the techniques
used to develop sources for the next generation of accelerators are discussed.Comment: Presented at the CERN Accelerator School CAS 2011: High Power Hadron
Machines, Bilbao, 24 May - 2 June 201
Multipurpose High Frequency Electron Spin Resonance Spectrometer for Condensed Matter Research
We describe a quasi-optical multifrequency ESR spectrometer operating in the
75-225 GHz range and optimized at 210 GHz for general use in condensed matter
physics, chemistry and biology. The quasi-optical bridge detects the change of
mm wave polarization at the ESR. A controllable reference arm maintains a mm
wave bias at the detector. The attained sensitivity of 2x10^10 spin/G/(Hz)1/2,
measured on a dilute Mn:MgO sample in a non-resonant probe head at 222.4 GHz
and 300 K, is comparable to commercial high sensitive X band spectrometers. The
spectrometer has a Fabry-Perot resonator based probe head to measure aqueous
solutions, and a probe head to measure magnetic field angular dependence of
single crystals. The spectrometer is robust and easy to use and may be operated
by undergraduate students. Its performance is demonstrated by examples from
various fields of condensed matter physics.Comment: submitted to Journal of Magnetic Resonanc
High quality ultrafast transmission electron microscopy using resonant microwave cavities
Ultrashort, low-emittance electron pulses can be created at a high repetition
rate by using a TM deflection cavity to sweep a continuous beam across
an aperture. These pulses can be used for time-resolved electron microscopy
with atomic spatial and temporal resolution at relatively large average
currents. In order to demonstrate this, a cavity has been inserted in a
transmission electron microscope, and picosecond pulses have been created. No
significant increase of either emittance or energy spread has been measured for
these pulses.
At a peak current of pA, the root-mean-square transverse normalized
emittance of the electron pulses is m rad in the direction parallel to the streak of the cavity, and
m rad in the perpendicular
direction for pulses with a pulse length of 1.1-1.3 ps. Under the same
conditions, the emittance of the continuous beam is
m rad.
Furthermore, for both the pulsed and the continuous beam a full width at half
maximum energy spread of eV has been measured
A Comparison of Laser and Microwave Approaches to CW Beamed Energy Launch
One approach to beamed energy propulsion uses a solid heat exchanger to absorb energy from a distant source and transfer it to a working fluid. Systems of this type can be designed using either microwave or laser sources. In general, microwave sources have been expected to be less expensive than lasers for a given power, but to be more limited in range and/or energy density. With the development of high power millimeter-wave sources and low-cost diode laser arrays, both assumptions are open to question. In this paper, we compare current and projected microwave and laser source technologies for a 100-kilogram-class ground-to-orbit launch system and identify key issues affecting the system-level trade between the two approaches
Annual Report 2018/Institute for Pulsed Power and Microwave Technology / Institut fĂŒr Hochleistungsimpuls- und Mikrowellentechnik. (KIT Scientific Reports ; 7758)
Das Institut fĂŒr Hochleistungsimpuls- und Mikrowellentechnik (IHM) forscht auf den Gebieten der gepulsten Leistung und der Hochleistungsmikrowellentechnologie. Die Anwendungen fĂŒr Impulsstromtechnologien reichen von der Materialbearbeitung bis zur Bioelektrik. Hochleistungsmikrowellentechnologien konzentrieren sich auf HF-Quellen (Gyrotrons) fĂŒr die Elektronenzyklotronresonanzheizung von magnetisch eingeschlossenen Plasmen und auf Anwendungen fĂŒr die Materialbearbeitung bei Mikrowellenfrequenzen
Ion lasers-the early years
The paper is a personal, anecdotal history of the discovery and early development of ion lasers, particularly the argon ion laser. A brief discussion of the mechanisms that make this laser work, and the engineering challenges and developments that make it practical are included. Some early applications in night reconnaissance and imaging are include
Analysis of a Mars-stationary orbiting microwave power transmission system
To determine the feasibility of providing efficient RF power transmission from a Mars-stationary orbit to the surface of the planet, an assessment was made focussing on RF propagation in the 2.45- to 300-GHz range. The proposed orbiting system configuration provides for power generation by either photovoltaic array or nuclear reactor, the conversion of the dc output to RF, and subsequent propagation of RF energy from the orbiting array to the Martian surface. On the planet, a rectenna array will convert RF to dc power to be distributed for planetary power needs. Total efficiency of the energy conversion chain from dc to RF in orbit through RF to dc on the planetary surface was derived for several representative frequencies in the range of study. Tradeoffs between component efficiency and transmitting antenna requirements were considered for each of these frequencies. Rectenna element power density thresholds and desired received power levels were used to determine receiving antenna criteria. Recommendations are presented for research into developing technologies which may afford enhanced viability of the proposed microwave power transmission system
Theory and particle tracking simulations of a resonant radiofrequency deflection cavity in TM mode for ultrafast electron microscopy
We present a theoretical description of resonant radiofrequency (RF)
deflecting cavities in TM mode as dynamic optical elements for
ultrafast electron microscopy. We first derive the optical transfer matrix of
an ideal pillbox cavity and use a Courant-Snyder formalism to calculate the 6D
phase space propagation of a Gaussian electron distribution through the cavity.
We derive closed, analytic expressions for the increase in transverse emittance
and energy spread of the electron distribution. We demonstrate that for the
special case of a beam focused in the center of the cavity, the low emittance
and low energy spread of a high quality beam can be maintained, which allows
high-repetition rate, ultrafast electron microscopy with 100 fs temporal
resolution combined with the atomic resolution of a high-end TEM. This is
confirmed by charged particle tracking simulations using a realistic cavity
geometry, including fringe fields at the cavity entrance and exit apertures
- âŠ