Collection of anthropometry from older and physically impaired persons: traditional methods versus TC2 3-D body scanner

With advances in technology it is now possible to collect a wide range of anthropometric data, to a high degree of accuracy, using 3D light-based body scanners. This gives the potential to speed up the collection of anthropometric data for design purposes, to decrease processing time and data input required, and to reduce error due to inaccuracy of measurements taken using more traditional methods and equipment (anthropometer, stadiometer and sitting height table). However, when the data collection concerns older and/or physically impaired people there are serious issues for consideration when deciding on the best method to collect anthropometry. This paper discusses the issues arising when collecting data using both traditional methods of data collection and a first use by the experimental team of the TC2 3D body scanner, when faced with a ‘non-standard’ sample, during an EPSRC funded research project into issues surrounding transport usage by older and physically impaired people. Relevance to industry: Designing products, environments and services so that the increasing ageing population, as well as the physically impaired, can use them increases the potential market. To do this, up-to-date and relevant anthropometry is often needed. 3D light-based bodyscanners offer a potential fast way of obtaining this data, and this paper discusses some of the issues with using one scanner with older and disabled people

The Reliability Of Facial Soft Tissue Landmarks With Photogrammetry

Introduction:With attention being given to the deleterious effects of radiation exposure from dental radiographs and inaccuracies in cephalometric soft tissue measurements, an alternative method of facial analysis with sufficiently reliable soft tissue landmarks should be developed. The goals of this study were threefold: (1) to define a new, low-cost method for capturing standardized frontal and sagittal facial images, (2) to determine on which photographic view that landmarks can be more reliably located, and (3) to determine which landmarks are appropriate for quantitative facial analysis. Materials and Methods:Simultaneous frontal and right sagittal facial images of 10 male and 10 female dental student subjects were captured using high-definition webcams as part of a low-cost set-up. Seventeen identical predefined facial soft tissue landmarks were located by 5 examiners on both types of images and were recorded as coordinate values. These coordinate values were used to calculate the best estimate of the true value for each landmark, mean deviation from this best estimate, and reliability in the X- and Y-axes using the Shrout-Fleiss intraclass correlation coefficient with corresponding 95% confidence intervals. Two examiners repeated the landmark location to evaluate intra-examiner reliability. Results:With a 95% confidence interval range of \u3e0.950, nose and mouth landmarks were among the most reliable landmarks on frontal and sagittal facial images. Converselyright soft tissue gonionwas one of the least reliable landmarks located in this study. In general, landmarks located by a single examiner showed greater reliability than when there were multiple examiners. Conclusions:This low-cost method yielded frontal and sagittal images sufficient for landmark identification. The magnitude of error varies between landmarks, is largest for poorly demarcated landmarks, and most had a non-circular envelope of error. Certain landmarks were more reliable on sagittal images and others were more reliable on frontal images. All landmarks had greater reliability and less mean deviation when located by a single examiner

Parametric Analysis Using the Finite Element Method to Investigate Prosthetic Interface Stresses for Persons with Trans-tibial Amputation

A finite element (FE) model of the below-knee residual limb and prosthetic socket was created to investigate the effects of parameter variations on the interface stress distribution during static stance. This model was based upon geometric approximations of anthropometric residual limb geometry. The model was not specific to an individual with amputation, but could be scaled to approximate the limb of a particular subject. Parametric analyses were conducted to investigate the effects of prosthetic socket design and residual limb geometry on the residual limb/prosthetic socket interface stresses. Behavioral trends were illustrated via sensitivity analysis. The results of the parametric analyses indicate that the residual limb/prosthetic socket interface stresses are affected by variations in both prosthetic design and residual limb geometry. Specifically, the analyses indicate : 1) the residual limb/prosthetic liner interface pressures are relatively insensitive to the socket stiffness ; 2) the stiffness of the prosthetic liner influences the interface stress distribution for both the unrectified and patellar-tendon-bearing (PTB) rectified models-- the external load state appears to influence the interface pressure distribution, while the prosthetic socket rectification appears to influence the interface shear stress distribution ; 3) the interface pressures are - very sensitive to the prosthetic rectification ; 4) the shape and relative bulk of soft tissue may significantly influence the interface pressure distribution ; 5) the interface pressure distribution is also influenced by the residual limb length; and 6) the stiffness/compliance of the residual limb soft tissues may significantly alter the interface pressure distribution

Ergonomic Models of Anthropometry, Human Biomechanics and Operator-Equipment Interfaces

The Committee on Human Factors was established in October 1980 by the Commission on Behavioral and Social Sciences and Education of the National Research Council. The committee is sponsored by the Office of Naval Research, the Air Force Office of Scientific Research, the Army Research Institute for the Behavioral and Social Sciences, the National Aeronautics and Space Administration, and the National Science Foundation. The workshop discussed the following: anthropometric models; biomechanical models; human-machine interface models; and research recommendations. A 17-page bibliography is included

Associations between anthropometric characteristics and physical performance in male law enforcement officers: A retrospective cohort study

BACKGROUND: Police officers are often required to undertake physically demanding tasks, like lifting, dragging and pursuing a suspect. Therefore, physical performance is a key requirement. METHODS: Retrospective data for 76 male police officers (mean age = 39.42 ± 8.41 years; mean weight = 84.21 ± 12.91 kg) was obtained. Data included anthropometric (skinfolds, estimated percentage body fat, lean body mass and fat mass) and physical performance (1 Repetition Maximum Bench Press, 1–min sit-ups, 1-min push-ups, vertical jump, 300 m run, 1.5 mile run) measures and correlations between anthropometric measurement and fitness score were obtained. RESULTS: Estimated percentage body fat was significantly (p ≤ .001) and negatively correlated with all performance measures, except sit-ups and 300 m and 1.5 mile run performance. Estimated lean body mass was significantly and positively (p ≤ .001) correlated with push-ups, bench press and vertical jump measures, while increasing estimated fat mass was significantly (p ≤ .001) associated with reduced performance on sit-up, vertical jump, 1.5 mile run and estimated maximal voluntary oxygen uptake. CONCLUSIONS: A targeted approach, going beyond just decreasing percentage body fat to also selectively increasing lean mass, should be applied for optimal improvement in physical fitness performance

A Review of Prosthetic Interface Stress Investigations

Over the last decade, numerous experimental and numerical analyses have been conducted to investigate the stress distribution between the residual limb and prosthetic socket of persons with lower limb amputation. The objectives of these analyses have been to improve our understanding of the residual limb/prosthetic socket system, to evaluate the influence of prosthetic design parameters and alignment variations on the interface stress distribution, and to evaluate prosthetic fit. The purpose of this paper is to summarize these experimental investigations and identify associated limitations. In addition, this paper presents an overview of various computer models used to investigate the residual limb interface, and discusses the differences and potential ramifications of the various modeling formulations. Finally, the potential and future applications of these experimental and numerical analyses in prosthetic design are presented

Aerospace medicine and biology: A continuing bibliography with indexes (supplement 341)

This bibliography lists 133 reports, articles and other documents introduced into the NASA Scientific and Technical Information System during September 1990. Subject coverage includes: aerospace medicine and psychology, life support systems and controlled environments, safety equipment, exobiology and extraterrestrial life, and flight crew behavior and performance

Breastfeeding shows a protective trend toward adolescents with higher abdominal adiposity

Objective: The question of whether breastfeeding has a protective effect against the development of overweight or obesity later in life remains controversial, especially during adolescence. The objective was to assess the relationship between breastfeeding and adolescents' body composition. Methods: The HELENA study is a cross-sectional study involving 3,528 adolescents from 10 European cities. The outcome measures were body weight and height, subscapular skinfolds as well as waist circumferences. Breastfeeding, smoking status, and parental socioeconomic status were assessed by self-administered questionnaires. Dietary intake was recorded using two 24 hour recall surveys. Two adjustment approaches were used: i) covariance analysis adjusted for confounding factors (propensity score adjustment) observed between breastfeeding and body composition parameters (BMI Z-score; sum of skinfolds, waist-to-height ratio). An adjusted quantile regression analysis showed a non-significant trend for a protective effect of breastfeeding toward the highest percentiles of adiposity in boys but not in girls. This is of particular interest with respect to the superiority of the waist-to-height ratio over waist circumference and BMI for detecting cardiometabolic risk factors. Conclusion: This first European study, including a large set of factors influencing adolescents body composition, showed a non significant trend toward a protective effect of breastfeeding on highest percentiles of adolescent's abdominal adiposity