Sensors for product characterization and quality of specialty crops—A review

This review covers developments in non-invasive techniques for quality analysis and inspection of specialty crops, mainly fresh fruits and vegetables, over the past decade up to the year 2010. Presented and discussed in this review are advanced sensing technologies including computer vision, spectroscopy, X-rays, magnetic resonance, mechanical contact, chemical sensing, wireless sensor networks and radiofrequency identification sensors. The current status of different sensing systems is described in the context of commercial application. The review also discusses future research needs and potentials of these sensing technologies. Emphases are placed on those technologies that have been proven effective or have shown great potential for agro-food applications. Despite significant progress in the development of non-invasive techniques for quality assessment of fruits and vegetables, the pace for adoption of these technologies by the specialty crop industry has been slow

Index to NASA Tech Briefs, 1975

This index contains abstracts and four indexes--subject, personal author, originating Center, and Tech Brief number--for 1975 Tech Briefs

Instability processes and optimisation in multi-kilowatt coaxial CO2 lasers

Restricted access until 31 December 2018This thesis presents research carried out on a high power diffusion-cooled CO2 laser excited by a radiofrequency (RF) electric discharge in the annular configuration, and with a folded hybrid optical resonator. The main objective of the research was to investigate certain key aspects of the laser, so as to optimise overall performance while increasing power stability and reproducibility and ensuring safe and reliable operation at minimum cost. The work presented in the thesis contributed significantly to introduce the TruCoax Version 6 laser, which has 40% lower cost compared to the preceding version. The technological challenges encountered are divided into four main research areas as follows: The first area relates to RF discharge stability especially during the discharge ignition process and in the region of the RF feed-through, where an improved design eliminated damage due to electric breakdown and suppressed the occurrence of local γ-type RF discharge. Secondly, experimental acoustic measurements matched with a theoretical characterization of the acoustic properties of the annular CO2 laser vacuum vessel were used to generate information on the acoustic resonant frequencies and standing-wave patterns. Implementation of laser control algorithms based on this information prevented from laser damage due to acoustic resonances. Thirdly, the impact of thermal lensing in a gas laser gain medium located within a freespace stable resonator has been studied. The results show that the thermal lensing is an integral part of resonator configuration in the stable direction and can be applied towards a unified design for a range of RF input power levels. In the fourth key research area, temporal fluctuations in the laser output power (of order of 100 W) which were observed to occur on a timescale of minutes have been investigated for a laser with a power output of ~3.5 kW. Small power fluctuations in the range of ± 25 W could be attributed to increases in the coupling losses of rotational lines, and this was confirmed experimentally

Testing of Materials and Elements in Civil Engineering

This book was proposed and organized as a means to present recent developments in the field of testing of materials and elements in civil engineering. For this reason, the articles highlighted in this editorial relate to different aspects of testing of different materials and elements in civil engineering, from building materials to building structures. The current trend in the development of testing of materials and elements in civil engineering is mainly concerned with the detection of flaws and defects in concrete elements and structures, and acoustic methods predominate in this field. As in medicine, the trend is towards designing test equipment that allows one to obtain a picture of the inside of the tested element and materials. Interesting results with significance for building practices were obtained

Aeronautical engineering: A special bibliography with indexes, supplement 80

This bibliography lists 277 reports, articles, and other documents introduced into the NASA scientific and technical information system in January 1977

Improved micro-contact resistance model that considers material deformation, electron transport and thin film characteristics

This paper reports on an improved analytic model forpredicting micro-contact resistance needed for designing microelectro-mechanical systems (MEMS) switches. The originalmodel had two primary considerations: 1) contact materialdeformation (i.e. elastic, plastic, or elastic-plastic) and 2) effectivecontact area radius. The model also assumed that individual aspotswere close together and that their interactions weredependent on each other which led to using the single effective aspotcontact area model. This single effective area model wasused to determine specific electron transport regions (i.e. ballistic,quasi-ballistic, or diffusive) by comparing the effective radius andthe mean free path of an electron. Using this model required thatmicro-switch contact materials be deposited, during devicefabrication, with processes ensuring low surface roughness values(i.e. sputtered films). Sputtered thin film electric contacts,however, do not behave like bulk materials and the effects of thinfilm contacts and spreading resistance must be considered. Theimproved micro-contact resistance model accounts for the twoprimary considerations above, as well as, using thin film,sputtered, electric contact

Measurement, optimisation and control of particle properties in pharmaceutical manufacturing processes

Previously held under moratorium from 2 June 2020 until 6 June 2022.The understanding and optimisation of particle properties connected to their structure and morphology is a common objective for particle engineering applications either to improve materialhandling in the manufacturing process or to influence Critical Quality Attributes (CQAs) linked to product performance. This work aims to demonstrate experimental means to support a rational development approach for pharmaceutical particulate systems with a specific focus on droplet drying platforms such as spray drying. Micro-X-ray tomography (micro-XRT) is widely applied in areas such as geo- and biomedical sciences to enable a three dimensional investigation of the specimens. Chapter 4 elaborates on practical aspects of micro-XRT for a quantitative analysis of pharmaceutical solid products with an emphasis on implemented image processing and analysis methodologies. Potential applications of micro-XRT in the pharmaceutical manufacturing process can range from the characterisation of single crystals to fully formulated oral dosage forms. Extracted quantitative information can be utilised to directly inform product design and production for process development or optimisation. The non-destructive nature of the micro-XRT analysis can be further employed to investigate structure-performance relationships which might provide valuable insights for modelling approaches. Chapter 5 further demonstrates the applicability of micro-XRT for the analysis of ibuprofen capsules as a multi-particulate system each with a population of approximately 300 pellets. The in-depth analysis of collected micro-XRT image data allowed the extraction of more than 200 features quantifying aspects of the pellets’ size, shape, porosity, surface and orientation. Employed feature selection and machine learning methods enabled the detection of broken pellets within a classification model. The classification model has an accuracy of more than 99.55% and a minimum precision of 86.20% validated with a test dataset of 886 pellets from three capsules. The combination of single droplet drying (SDD) experiments with a subsequent micro-XRT analysis was used for a quantitative investigation of the particle design space and is described in Chapter 6. The implemented platform was applied to investigate the solidification of formulated metformin hydrochloride particles using D-mannitol and hydroxypropyl methylcellulose within a selected, pragmatic particle design space. The results indicate a significant impact of hydroxypropyl methylcellulose reducing liquid evaporation rates and particle drying kinetics. The morphology and internal structure of the formulated particles after drying are dominated by a crystalline core of D-mannitol partially suppressed with increasing hydroxypropyl methylcellulose additions. The characterisation of formulated metformin hydrochloride particles with increasing polymer content demonstrated the importance of an early-stage quantitative assessment of formulation-related particle properties. A reliable and rational spray drying development approach needs to assess parameters of the compound system as well as of the process itself in order to define a well-controlled and robust operational design space. Chapter 7 presents strategies for process implementation to produce peptide-based formulations via spray drying demonstrated using s-glucagon as a model peptide. The process implementation was supported by an initial characterisation of the lab-scale spray dryer assessing a range of relevant independent process variables including drying temperature and feed rate. The platform response was captured with available and in-house developed Process Analytical Technology. A B-290 Mini-Spray Dryer was used to verify the development approach and to implement the pre-designed spray drying process. Information on the particle formation mechanism observed in SDD experiments were utilised to interpret the characteristics of the spray dried material.The understanding and optimisation of particle properties connected to their structure and morphology is a common objective for particle engineering applications either to improve materialhandling in the manufacturing process or to influence Critical Quality Attributes (CQAs) linked to product performance. This work aims to demonstrate experimental means to support a rational development approach for pharmaceutical particulate systems with a specific focus on droplet drying platforms such as spray drying. Micro-X-ray tomography (micro-XRT) is widely applied in areas such as geo- and biomedical sciences to enable a three dimensional investigation of the specimens. Chapter 4 elaborates on practical aspects of micro-XRT for a quantitative analysis of pharmaceutical solid products with an emphasis on implemented image processing and analysis methodologies. Potential applications of micro-XRT in the pharmaceutical manufacturing process can range from the characterisation of single crystals to fully formulated oral dosage forms. Extracted quantitative information can be utilised to directly inform product design and production for process development or optimisation. The non-destructive nature of the micro-XRT analysis can be further employed to investigate structure-performance relationships which might provide valuable insights for modelling approaches. Chapter 5 further demonstrates the applicability of micro-XRT for the analysis of ibuprofen capsules as a multi-particulate system each with a population of approximately 300 pellets. The in-depth analysis of collected micro-XRT image data allowed the extraction of more than 200 features quantifying aspects of the pellets’ size, shape, porosity, surface and orientation. Employed feature selection and machine learning methods enabled the detection of broken pellets within a classification model. The classification model has an accuracy of more than 99.55% and a minimum precision of 86.20% validated with a test dataset of 886 pellets from three capsules. The combination of single droplet drying (SDD) experiments with a subsequent micro-XRT analysis was used for a quantitative investigation of the particle design space and is described in Chapter 6. The implemented platform was applied to investigate the solidification of formulated metformin hydrochloride particles using D-mannitol and hydroxypropyl methylcellulose within a selected, pragmatic particle design space. The results indicate a significant impact of hydroxypropyl methylcellulose reducing liquid evaporation rates and particle drying kinetics. The morphology and internal structure of the formulated particles after drying are dominated by a crystalline core of D-mannitol partially suppressed with increasing hydroxypropyl methylcellulose additions. The characterisation of formulated metformin hydrochloride particles with increasing polymer content demonstrated the importance of an early-stage quantitative assessment of formulation-related particle properties. A reliable and rational spray drying development approach needs to assess parameters of the compound system as well as of the process itself in order to define a well-controlled and robust operational design space. Chapter 7 presents strategies for process implementation to produce peptide-based formulations via spray drying demonstrated using s-glucagon as a model peptide. The process implementation was supported by an initial characterisation of the lab-scale spray dryer assessing a range of relevant independent process variables including drying temperature and feed rate. The platform response was captured with available and in-house developed Process Analytical Technology. A B-290 Mini-Spray Dryer was used to verify the development approach and to implement the pre-designed spray drying process. Information on the particle formation mechanism observed in SDD experiments were utilised to interpret the characteristics of the spray dried material

ALERT Doctoral School 2012: advanced experimental techniques in geomechanics

The twenty-second session of the European Graduate School 2012 (called usually ALERT Doctoral School) entitled Advanced experimental techniques in geomechanics is organized by Cino Viggiani, Steve Hall and Enrique Romero.Postprint (published version