7,884 research outputs found
Teaching Hardware Design of Fixed-Point Digital Signal Processing Systems
Signal processing theory and practice are enabling and driving forces behind multimedia devices, communications systems, and even such diverse fields as automotive and medical systems. Over 90 % of the signal processing systems on the market used fixed-point arithmetic because of the cost, power, and area savings that fixed-point systems provide. However, most colleges and universities do not teach or teach only a very little fixed-point signal processing. This issue is being addressed slowly around the country but now a new challenge or opportunity presents itself. As reconfigurable logic technology matures, field-programmable gate arrays (FPGAs) are increasingly used for signal processing systems. They have the advantage of tremendous throughput, great flexibility, and system integration. The challenge is that signal processing in FPGAs is a much less constrained problem than signal processing in special purpose microprocessors. The opportunity arises in that it is now possible to explore more options and, more especially, to take a more systems-level approach to signal processing systems. In short, designing a signal processing system using FPGAs provides opportunities to look at many system design issues and trade-offs in a classroom setting. We have developed a course to teach signal processing in FPGAs at Georgia Institute of Technology and in this paper we consider the challenges and methods of teaching fixedpoint system design in this course. We discuss the topics chosen and how they differ from traditional microprocessor-based courses. We also discuss how systems engineering concepts are woven into the course.
Digital signal processing: the impact of convergence on education, society and design flow
Design and development of real-time, memory and processor hungry digital signal processing systems has for decades been accomplished on general-purpose microprocessors. Increasing needs for high-performance DSP systems made these microprocessors unattractive for such implementations. Various attempts to improve the performance of these systems resulted in the use of dedicated digital signal processing devices like DSP processors and the former heavyweight champion of electronics design â Application Specific Integrated Circuits.
The advent of RAM-based Field Programmable Gate Arrays has changed the DSP design flow. Software algorithmic designers can now take their DSP algorithms right from inception to hardware implementation, thanks to the increasing availability of software/hardware design flow or hardware/software co-design. This has led to a demand in the industry for graduates with good skills in both Electrical Engineering and Computer Science. This paper evaluates the impact of technology on DSP-based designs, hardware design languages, and how graduate/undergraduate courses have changed to suit this transition
Pixie: A heterogeneous Virtual Coarse-Grained Reconfigurable Array for high performance image processing applications
Coarse-Grained Reconfigurable Arrays (CGRAs) enable ease of programmability
and result in low development costs. They enable the ease of use specifically
in reconfigurable computing applications. The smaller cost of compilation and
reduced reconfiguration overhead enables them to become attractive platforms
for accelerating high-performance computing applications such as image
processing. The CGRAs are ASICs and therefore, expensive to produce. However,
Field Programmable Gate Arrays (FPGAs) are relatively cheaper for low volume
products but they are not so easily programmable. We combine best of both
worlds by implementing a Virtual Coarse-Grained Reconfigurable Array (VCGRA) on
FPGA. VCGRAs are a trade off between FPGA with large routing overheads and
ASICs. In this perspective we present a novel heterogeneous Virtual
Coarse-Grained Reconfigurable Array (VCGRA) called "Pixie" which is suitable
for implementing high performance image processing applications. The proposed
VCGRA contains generic processing elements and virtual channels that are
described using the Hardware Description Language VHDL. Both elements have been
optimized by using the parameterized configuration tool flow and result in a
resource reduction of 24% for each processing elements and 82% for each virtual
channels respectively.Comment: Presented at 3rd International Workshop on Overlay Architectures for
FPGAs (OLAF 2017) arXiv:1704.0880
A user configurable data acquisition and signal processing system for high-rate, high channel count applications
Real-time signal processing in plasma fusion experiments is required for control and for data reduction as plasma pulse times grow longer. The development time and cost for these high-rate, multichannel signal processing systems can be significant. This paper proposes a new digital signal processing (DSP) platform for the data acquisition system that will allow users to easily customize real-time signal processing systems to meet their individual requirements. The D-TACQ reconfigurable user in-line DSP (DRUID) system carries out the signal processing tasks in hardware co-processors (CPs) implemented in an FPGA, with an embedded microprocessor (ÎŒP) for control. In the fully developed platform, users will be able to choose co-processors from a library and configure programmable parameters through the ÎŒP to meet their requirements. The DRUID system is implemented on a Spartan 6 FPGA, on the new rear transition module (RTM-T), a field upgrade to existing D-TACQ digitizers. As proof of concept, a multiply-accumulate (MAC) co-processor has been developed, which can be configured as a digital chopper-integrator for long pulse magnetic fusion devices. The DRUID platform allows users to set options for the integrator, such as the number of masking samples. Results from the digital integrator are presented for a data acquisition system with 96 channels simultaneously acquiring data at 500 kSamples/s per channel
A Scalable Correlator Architecture Based on Modular FPGA Hardware, Reuseable Gateware, and Data Packetization
A new generation of radio telescopes is achieving unprecedented levels of
sensitivity and resolution, as well as increased agility and field-of-view, by
employing high-performance digital signal processing hardware to phase and
correlate large numbers of antennas. The computational demands of these imaging
systems scale in proportion to BMN^2, where B is the signal bandwidth, M is the
number of independent beams, and N is the number of antennas. The
specifications of many new arrays lead to demands in excess of tens of PetaOps
per second.
To meet this challenge, we have developed a general purpose correlator
architecture using standard 10-Gbit Ethernet switches to pass data between
flexible hardware modules containing Field Programmable Gate Array (FPGA)
chips. These chips are programmed using open-source signal processing libraries
we have developed to be flexible, scalable, and chip-independent. This work
reduces the time and cost of implementing a wide range of signal processing
systems, with correlators foremost among them,and facilitates upgrading to new
generations of processing technology. We present several correlator
deployments, including a 16-antenna, 200-MHz bandwidth, 4-bit, full Stokes
parameter application deployed on the Precision Array for Probing the Epoch of
Reionization.Comment: Accepted to Publications of the Astronomy Society of the Pacific. 31
pages. v2: corrected typo, v3: corrected Fig. 1
Combined Integer and Floating Point Multiplication Architecture(CIFM) for FPGAs and Its Reversible Logic Implementation
In this paper, the authors propose the idea of a combined integer and
floating point multiplier(CIFM) for FPGAs. The authors propose the replacement
of existing 18x18 dedicated multipliers in FPGAs with dedicated 24x24
multipliers designed with small 4x4 bit multipliers. It is also proposed that
for every dedicated 24x24 bit multiplier block designed with 4x4 bit
multipliers, four redundant 4x4 multiplier should be provided to enforce the
feature of self repairability (to recover from the faults). In the proposed
CIFM reconfigurability at run time is also provided resulting in low power. The
major source of motivation for providing the dedicated 24x24 bit multiplier
stems from the fact that single precision floating point multiplier requires
24x24 bit integer multiplier for mantissa multiplication. A reconfigurable,
self-repairable 24x24 bit multiplier (implemented with 4x4 bit multiply
modules) will ideally suit this purpose, making FPGAs more suitable for integer
as well floating point operations. A dedicated 4x4 bit multiplier is also
proposed in this paper. Moreover, in the recent years, reversible logic has
emerged as a promising technology having its applications in low power CMOS,
quantum computing, nanotechnology, and optical computing. It is not possible to
realize quantum computing without reversible logic. Thus, this paper also paper
provides the reversible logic implementation of the proposed CIFM. The
reversible CIFM designed and proposed here will form the basis of the
completely reversible FPGAs.Comment: Published in the proceedings of the The 49th IEEE International
Midwest Symposium on Circuits and Systems (MWSCAS 2006), Puerto Rico, August
2006. Nominated for the Student Paper Award(12 papers are nominated for
Student paper Award among all submissions
- âŠ