257 research outputs found
Thermal Management for 3D-Stacked Systems via Unified Core-Memory Power Regulation
3D-stacked processor-memory systems stack memory (DRAM banks) directly on top of logic (CPU cores) using chiplet-on-chiplet packaging technology to provide the next-level computing performance in embedded platforms. Stacking, however, severely increases the system’s power density without any accompanying increase in the heat dissipation capacity. Consequently, 3D-stacked processor-memory systems suffer more severe thermal issues than their non-stacked counterparts. Nevertheless, 3D-stacked processor-memory systems do inherit power (thermal) management knobs from their non-stacked predecessors - namely Dynamic Voltage and Frequency Scaling (DVFS) for cores and Low Power Mode (LPM) for memory banks. In the context of 3D-stacked processor-memory systems, DVFS and LPM are performance- and power-wise deeply intertwined. Their non-unified independent use on 3D-stacked processor-memory systems results in sub-optimal thermal management. The unified use of DVFS and LPM for thermal management for 3D-stacked processor-memory systems remains unexplored. The lack of implementation of LPM in thermal simulators for 3D-stacked processor-memory systems hinders real-world representative evaluation for a unified approach.We extend the state-of-the-art interval thermal simulator for 3D-stacked processor-memory systems CoMeT with an LPM power management knob for memory banks. We also propose a learning-based thermal management technique for 3D-stacked processor-memory systems that employ DVFS and LPM in a unified manner. Detailed interval thermal simulations with the extended CoMeT framework show a 10.15% average response time improvement with the PARSEC and SPLASH-2 benchmark suites, along with widely-used Deep Neural Network (DNN) workloads against a state-of-the-art thermal management technique for 2.5D processor-memory systems (ported directly to 3D-stacked processor-memory systems) that also proposes unified use of DVFS and LPM
Performance Characterization of Multi-threaded Graph Processing Applications on Intel Many-Integrated-Core Architecture
Intel Xeon Phi many-integrated-core (MIC) architectures usher in a new era of
terascale integration. Among emerging killer applications, parallel graph
processing has been a critical technique to analyze connected data. In this
paper, we empirically evaluate various computing platforms including an Intel
Xeon E5 CPU, a Nvidia Geforce GTX1070 GPU and an Xeon Phi 7210 processor
codenamed Knights Landing (KNL) in the domain of parallel graph processing. We
show that the KNL gains encouraging performance when processing graphs, so that
it can become a promising solution to accelerating multi-threaded graph
applications. We further characterize the impact of KNL architectural
enhancements on the performance of a state-of-the art graph framework.We have
four key observations: 1 Different graph applications require distinctive
numbers of threads to reach the peak performance. For the same application,
various datasets need even different numbers of threads to achieve the best
performance. 2 Only a few graph applications benefit from the high bandwidth
MCDRAM, while others favor the low latency DDR4 DRAM. 3 Vector processing units
executing AVX512 SIMD instructions on KNLs are underutilized when running the
state-of-the-art graph framework. 4 The sub-NUMA cache clustering mode offering
the lowest local memory access latency hurts the performance of graph
benchmarks that are lack of NUMA awareness. At last, We suggest future works
including system auto-tuning tools and graph framework optimizations to fully
exploit the potential of KNL for parallel graph processing.Comment: published as L. Jiang, L. Chen and J. Qiu, "Performance
Characterization of Multi-threaded Graph Processing Applications on
Many-Integrated-Core Architecture," 2018 IEEE International Symposium on
Performance Analysis of Systems and Software (ISPASS), Belfast, United
Kingdom, 2018, pp. 199-20
Doctor of Philosophy
dissertationThe computing landscape is undergoing a major change, primarily enabled by ubiquitous wireless networks and the rapid increase in the use of mobile devices which access a web-based information infrastructure. It is expected that most intensive computing may either happen in servers housed in large datacenters (warehouse- scale computers), e.g., cloud computing and other web services, or in many-core high-performance computing (HPC) platforms in scientific labs. It is clear that the primary challenge to scaling such computing systems into the exascale realm is the efficient supply of large amounts of data to hundreds or thousands of compute cores, i.e., building an efficient memory system. Main memory systems are at an inflection point, due to the convergence of several major application and technology trends. Examples include the increasing importance of energy consumption, reduced access stream locality, increasing failure rates, limited pin counts, increasing heterogeneity and complexity, and the diminished importance of cost-per-bit. In light of these trends, the memory system requires a major overhaul. The key to architecting the next generation of memory systems is a combination of the prudent incorporation of novel technologies, and a fundamental rethinking of certain conventional design decisions. In this dissertation, we study every major element of the memory system - the memory chip, the processor-memory channel, the memory access mechanism, and memory reliability, and identify the key bottlenecks to efficiency. Based on this, we propose a novel main memory system with the following innovative features: (i) overfetch-aware re-organized chips, (ii) low-cost silicon photonic memory channels, (iii) largely autonomous memory modules with a packet-based interface to the proces- sor, and (iv) a RAID-based reliability mechanism. Such a system is energy-efficient, high-performance, low-complexity, reliable, and cost-effective, making it ideally suited to meet the requirements of future large-scale computing systems
Doctor of Philosophy in Computing
dissertatio
Re-designing Main Memory Subsystems with Emerging Monolithic 3D (M3D) Integration and Phase Change Memory Technologies
Over the past two decades, Dynamic Random-Access Memory (DRAM) has emerged as the dominant technology for implementing the main memory subsystems of all types of computing systems. However, inferring from several recent trends, computer architects in both the industry and academia have widely accepted that the density (memory capacity per chip area) and latency of DRAM based main memory subsystems cannot sufficiently scale in the future to meet the requirements of future data-centric workloads related to Artificial Intelligence (AI), Big Data, and Internet-of-Things (IoT). In fact, the achievable density and access latency in main memory subsystems presents a very fundamental trade-off. Pushing for a higher density inevitably increases access latency, and pushing for a reduced access latency often leads to a decreased density. This trade-off is so fundamental in DRAM based main memory subsystems that merely looking to re-architect DRAM subsystems cannot improve this trade-off, unless disruptive technological advancements are realized for implementing main memory subsystems.
In this thesis, we focus on two key contributions to overcome the density (represented as the total chip area for the given capacity) and access latency related challenges in main memory subsystems. First, we show that the fundamental area-latency trade-offs in DRAM can be significantly improved by redesigning the DRAM cell-array structure using the emerging monolithic 3D (M3D) integration technology. A DRAM bank structure can be split across two or more M3D-integrated tiers on the same DRAM chip, to consequently be able to significantly reduce the total on-chip area occupancy of the DRAM bank and its access peripherals. This approach is fundamentally different from the well known approach of through-silicon vias (TSVs)-based 3D stacking of DRAM tiers. This is because the M3D integration based approach does not require a separate DRAM chip per tier, whereas the 3D-stacking based approach does. Our evaluation results for PARSEC benchmarks show that our designed M3D DRAM cellarray organizations can yield up to 9.56% less latency and up to 21.21% less energy-delay product (EDP), with up to 14% less DRAM die area, compared to the conventional 2D DDR4 DRAM. Second, we demonstrate a pathway for eliminating the write disturbance errors in single-level-cell PCM, thereby positioning the PCM technology, which has inherently more relaxed density and latency trade-off compared to DRAM, as a more viable option for replacing the DRAM technology. We introduce low-temperature partial-RESET operations for writing ‘0’s in PCM cells. Compared to traditional operations that write \u270\u27s in PCM cells, partial-RESET operations do not cause disturbance errors in neighboring cells during PCM writes.
The overarching theme that connects the two individual contributions into this single thesis is the density versus latency argument. The existing PCM technology has 3 to 4× higher write latency compared to DRAM; nevertheless, the existing PCM technology can store 2 to 4 bits in a single cell compared to one bit per cell storage capacity of DRAM. Therefore, unlike DRAM, it becomes possible to increase the density of PCM without consequently increasing PCM latency. In other words, PCM exhibits inherently improved (more relaxed) density and latency trade-off. Thus, both of our contributions in this thesis, the first contribution of re-designing DRAM with M3D integration technology and the second contribution of making the PCM technology a more viable replacement of DRAM by eliminating the write disturbance errors in PCM, connect to the common overarching goal of improving the density and latency trade-off in main memory subsystems. In addition, we also discuss in this thesis possible future research directions that are aimed at extending the impacts of our proposed ideas so that they can transform the performance of main memory subsystems of the future
DESTINY: A Comprehensive Tool with 3D and Multi-Level Cell Memory Modeling Capability
To enable the design of large capacity memory structures, novel memory technologies such as non-volatile memory (NVM) and novel fabrication approaches, e.g., 3D stacking and multi-level cell (MLC) design have been explored. The existing modeling tools, however, cover only a few memory technologies, technology nodes and fabrication approaches. We present DESTINY, a tool for modeling 2D/3D memories designed using SRAM, resistive RAM (ReRAM), spin transfer torque RAM (STT-RAM), phase change RAM (PCM) and embedded DRAM (eDRAM) and 2D memories designed using spin orbit torque RAM (SOT-RAM), domain wall memory (DWM) and Flash memory. In addition to single-level cell (SLC) designs for all of these memories, DESTINY also supports modeling MLC designs for NVMs. We have extensively validated DESTINY against commercial and research prototypes of these memories. DESTINY is very useful for performing design-space exploration across several dimensions, such as optimizing for a target (e.g., latency, area or energy-delay product) for a given memory technology, choosing the suitable memory technology or fabrication method (i.e., 2D v/s 3D) for a given optimization target, etc. We believe that DESTINY will boost studies of next-generation memory architectures used in systems ranging from mobile devices to extreme-scale supercomputers. The latest source-code of DESTINY is available from the following git repository: https://bitbucket.org/sparsh_mittal/destiny_v2
Recommended from our members
Cross-Layer Pathfinding for Off-Chip Interconnects
Off-chip interconnects for integrated circuits (ICs) today induce a diverse design space, spanning many different applications that require transmission of data at various bandwidths, latencies and link lengths. Off-chip interconnect design solutions are also variously sensitive to system performance, power and cost metrics, while also having a strong impact on these metrics. The costs associated with off-chip interconnects include die area, package (PKG) and printed circuit board (PCB) area, technology and bill of materials (BOM). Choices made regarding off-chip interconnects are fundamental to product definition, architecture, design implementation and technology enablement. Given their cross-layer impact, it is imperative that a cross-layer approach be employed to architect and analyze off-chip interconnects up front, so that a top-down design flow can comprehend the cross-layer impacts and correctly assess the system performance, power and cost tradeoffs for off-chip interconnects. Chip architects are not exposed to all the tradeoffs at the physical and circuit implementation or technology layers, and often lack the tools to accurately assess off-chip interconnects. Furthermore, the collaterals needed for a detailed analysis are often lacking when the chip is architected; these include circuit design and layout, PKG and PCB layout, and physical floorplan and implementation. To address the need for a framework that enables architects to assess the system-level impact of off-chip interconnects, this thesis presents power-area-timing (PAT) models for off-chip interconnects, optimization and planning tools with the appropriate abstraction using these PAT models, and die/PKG/PCB co-design methods that help expose the off-chip interconnect cross-layer metrics to the die/PKG/PCB design flows. Together, these models, tools and methods enable cross-layer optimization that allows for a top-down definition and exploration of the design space and helps converge on the correct off-chip interconnect implementation and technology choice. The tools presented cover off-chip memory interfaces for mobile and server products, silicon photonic interfaces, 2.5D silicon interposers and 3D through-silicon vias (TSVs). The goal of the cross-layer framework is to assess the key metrics of the interconnect (such as timing, latency, active/idle/sleep power, and area/cost) at an appropriate level of abstraction by being able to do this across layers of the design flow. In additional to signal interconnect, this thesis also explores the need for such cross-layer pathfinding for power distribution networks (PDN), where the system-on-chip (SoC) floorplan and pinmap must be optimized before the collateral layouts for PDN analysis are ready. Altogether, the developed cross-layer pathfinding methodology for off-chip interconnects enables more rapid and thorough exploration of a vast design space of off-chip parallel and serial links, inter-die and inter-chiplet links and silicon photonics. Such exploration will pave the way for off-chip interconnect technology enablement that is optimized for system needs. The basis of the framework can be extended to cover other interconnect technology as well, since it fundamentally relates to system-level metrics that are common to all off-chip interconnects
- …