47 research outputs found
Methods for intraoperative, sterile pose-setting of patient-specific microstereotactic frames
This work proposes new methods for a microstereotactic frame based on bone cement fixation. Microstereotactic frames are under investigation for minimal invasive temporal bone surgery, e.g. cochlear implantation, or for deep brain stimulation, where products are already on the market. The correct pose of the microstereotactic frame is either adjusted outside or inside the operating room and the frame is used for e.g. drill or electrode guidance. We present a patientspecific, disposable frame that allows intraoperative, sterile pose-setting. Key idea of our approach is bone cement between two plates that cures while the plates are positioned with a mechatronics system in the desired pose. This paper includes new designs of microstereotactic frames, a system for alignment and first measurements to analyze accuracy and applicable load. © 2015 SPIE
Kinematics and Robot Design II (KaRD2019) and III (KaRD2020)
This volume collects papers published in two Special Issues “Kinematics and Robot Design II, KaRD2019” (https://www.mdpi.com/journal/robotics/special_issues/KRD2019) and “Kinematics and Robot Design III, KaRD2020” (https://www.mdpi.com/journal/robotics/special_issues/KaRD2020), which are the second and third issues of the KaRD Special Issue series hosted by the open access journal robotics.The KaRD series is an open environment where researchers present their works and discuss all topics focused on the many aspects that involve kinematics in the design of robotic/automatic systems. It aims at being an established reference for researchers in the field as other serial international conferences/publications are. Even though the KaRD series publishes one Special Issue per year, all the received papers are peer-reviewed as soon as they are submitted and, if accepted, they are immediately published in MDPI Robotics. Kinematics is so intimately related to the design of robotic/automatic systems that the admitted topics of the KaRD series practically cover all the subjects normally present in well-established international conferences on “mechanisms and robotics”.KaRD2019 together with KaRD2020 received 22 papers and, after the peer-review process, accepted only 17 papers. The accepted papers cover problems related to theoretical/computational kinematics, to biomedical engineering and to other design/applicative aspects
Cable-driven parallel mechanisms for minimally invasive robotic surgery
Minimally invasive surgery (MIS) has revolutionised surgery by providing faster recovery times, less post-operative complications, improved cosmesis and reduced pain for the patient. Surgical robotics are used to further decrease the invasiveness of procedures, by using yet smaller and fewer incisions or using natural orifices as entry point. However, many robotic systems still suffer from technical challenges such as sufficient instrument dexterity and payloads, leading to limited adoption in clinical practice. Cable-driven parallel mechanisms (CDPMs) have unique properties, which can be used to overcome existing challenges in surgical robotics. These beneficial properties include high end-effector payloads, efficient force transmission and a large configurable instrument workspace. However, the use of CDPMs in MIS is largely unexplored. This research presents the first structured exploration of CDPMs for MIS and demonstrates the potential of this type of mechanism through the development of multiple prototypes: the ESD CYCLOPS, CDAQS, SIMPLE, neuroCYCLOPS and microCYCLOPS. One key challenge for MIS is the access method used to introduce CDPMs into the body. Three different access methods are presented by the prototypes. By focusing on the minimally invasive access method in which CDPMs are introduced into the body, the thesis provides a framework, which can be used by researchers, engineers and clinicians to identify future opportunities of CDPMs in MIS. Additionally, through user studies and pre-clinical studies, these prototypes demonstrate that this type of mechanism has several key advantages for surgical applications in which haptic feedback, safe automation or a high payload are required. These advantages, combined with the different access methods, demonstrate that CDPMs can have a key role in the advancement of MIS technology.Open Acces
Advanced Applications of Rapid Prototyping Technology in Modern Engineering
Rapid prototyping (RP) technology has been widely known and appreciated due to its flexible and customized manufacturing capabilities. The widely studied RP techniques include stereolithography apparatus (SLA), selective laser sintering (SLS), three-dimensional printing (3DP), fused deposition modeling (FDM), 3D plotting, solid ground curing (SGC), multiphase jet solidification (MJS), laminated object manufacturing (LOM). Different techniques are associated with different materials and/or processing principles and thus are devoted to specific applications. RP technology has no longer been only for prototype building rather has been extended for real industrial manufacturing solutions. Today, the RP technology has contributed to almost all engineering areas that include mechanical, materials, industrial, aerospace, electrical and most recently biomedical engineering. This book aims to present the advanced development of RP technologies in various engineering areas as the solutions to the real world engineering problems
Surgical Applications of Compliant Mechanisms:A Review
Current surgical devices are mostly rigid and are made of stiff materials, even though their predominant use is on soft and wet tissues. With the emergence of compliant mechanisms (CMs), surgical tools can be designed to be flexible and made using soft materials. CMs offer many advantages such as monolithic fabrication, high precision, no wear, no friction, and no need for lubrication. It is therefore beneficial to consolidate the developments in this field and point to challenges ahead. With this objective, in this article, we review the application of CMs to surgical interventions. The scope of the review covers five aspects that are important in the development of surgical devices: (i) conceptual design and synthesis, (ii) analysis, (iii) materials, (iv) maim facturing, and (v) actuation. Furthermore, the surgical applications of CMs are assessed by classification into five major groups, namely, (i) grasping and cutting, (ii) reachability and steerability, (iii) transmission, (iv) sensing, and (v) implants and deployable devices. The scope and prospects of surgical devices using CMs are also discussed
Designing a robotic port system for laparo-endoscopic single-site surgery
Current research and development in the field of surgical interventions aim to reduce the invasiveness by using few incisions or natural orifices in the body to access the surgical site. Considering surgeries in the abdominal cavity, the Laparo-Endoscopic Single-site Surgery (LESS) can be performed through a single incision in the navel, reducing blood loss, post-operative trauma, and improving the cosmetic outcome. However, LESS results in less intuitive instrument control, impaired ergonomic, loss of depth and haptic perception, and restriction of
instrument positioning by a single incision. Robot-assisted surgery addresses these shortcomings, by introducing highly articulated, flexible robotic instruments, ergonomic control consoles with 3D visualization, and intuitive instrument control algorithms. The flexible robotic instruments are usually introduced into the abdomen via a rigid straight port, such that the positioning of the tools and therefore the accessibility of anatomical structures is still constrained by the incision location. To address this limitation, articulated ports for LESS are proposed by recent research works. However, they focus on only a few aspects, which are relevant to the surgery, such that a design considering all requirements for LESS has not been
proposed yet. This partially originates in the lack of anatomical data of specific applications. Further, no general design guidelines exist and only a few evaluation metrics are proposed. To target these challenges, this thesis focuses on the design of an articulated robotic port for LESS partial nephrectomy. A novel approach is introduced, acquiring the available abdominal workspace, integrated into the surgical workflow. Based on several generated patient datasets and developed metrics, design parameter optimization is conducted. Analyzing the surgical
procedure, a comprehensive requirement list is established and applied to design a robotic system, proposing a tendon-driven continuum robot as the articulated port structure. Especially, the aspects of stiffening and sterile design are addressed. In various experimental evaluations, the reachability, the stiffness, and the overall design are evaluated. The findings identify layer jamming as the superior stiffening method. Further, the articulated port is proven to enhance the accessibility of anatomical structures and offer a patient and incision location independent
design
Advances in Robot Kinematics : Proceedings of the 15th international conference on Advances in Robot Kinematics
International audienceThe motion of mechanisms, kinematics, is one of the most fundamental aspect of robot design, analysis and control but is also relevant to other scientific domains such as biome- chanics, molecular biology, . . . . The series of books on Advances in Robot Kinematics (ARK) report the latest achievement in this field. ARK has a long history as the first book was published in 1991 and since then new issues have been published every 2 years. Each book is the follow-up of a single-track symposium in which the participants exchange their results and opinions in a meeting that bring together the best of world’s researchers and scientists together with young students. Since 1992 the ARK symposia have come under the patronage of the International Federation for the Promotion of Machine Science-IFToMM.This book is the 13th in the series and is the result of peer-review process intended to select the newest and most original achievements in this field. For the first time the articles of this symposium will be published in a green open-access archive to favor free dissemination of the results. However the book will also be o↵ered as a on-demand printed book.The papers proposed in this book show that robot kinematics is an exciting domain with an immense number of research challenges that go well beyond the field of robotics.The last symposium related with this book was organized by the French National Re- search Institute in Computer Science and Control Theory (INRIA) in Grasse, France
DEVELOPMENT OF A SOFT PNEUMATIC ACTUATOR FOR MODULAR ROBOTIC MECHANISMS
Soft robotics is a widely and rapidly growing field of research today. Soft
pneumatic actuators, as a fundamental element in soft robotics, have gained
huge popularity and are being employed for the development of soft robots.
During the last decade, a variety of hyper-elastic robotic systems have been
realized. As the name suggests, such robots are made up of soft materials,
and do not have any underlying rigid mechanical structure. These robots are
actuated employing various methods like pneumatic, electroactive, jamming
etc. Generally, in order to achieve a desired mechanical response to produce
required actuation or manipulation, two or more materials having different
stiffness are utilized to develop a soft robot. However, this method introduces
complications in the fabrication process as well as in further design
flexibility and modifications. The current work presents a design scheme of
a soft robotic actuator adapting an easier fabrication approach, which is economical
and environment friendly as well.
The purpose is the realization of a soft pneumatic actuator having functional
ability to produce effective actuation, and which is further employable
to develop modular and scalable mechanisms. That infers to scrutinize the
profile and orientation of the internal actuation cavity and the outer shape of
viii
the actuator. Utilization of a single material for this actuator has been considered
to make this design scheme convenient. A commercial silicone rubber
was selected which served for an economical process both in terms of the
cost as well as its accommodating fabrication process through molding. In
order to obtain the material behavior, \u2018Ansys Workbench 17.1 R
\u2019 has been
used. Cubic outline for the actuator aided towards the realization of a body
shape which can easily be engaged for the development of modular mechanisms
employing multiple units. This outer body shape further facilitates
to achieve the stability and portability of the actuator. The soft actuator has
been named \u2018Soft Cubic Module\u2019 based on its external cubic shape. For the
internal actuation cavity design, various shapes, such as spherical, elliptical
and cylindrical, were examined considering their different sizes and orientations
within the cubic module. These internal cavities were simulated in order
to achieve single degree of freedom actuation. That means, only one face
of the cube is principally required to produce effective deformation. \u2018Creo
Perametric 3.0 M 130\u2019 has been used to design the model and to evaluate the
performance of actuation cavities in terms of effective deformation and the
resulting von-mises stress. Out of the simulated profiles, cylindrical cavity
with desired outcomes has been further considered to design the soft actuator.
\u2018Ansys Workbench 17.1 R
\u2019 environment was further used to assess the
performance of cylindrical actuation cavity. Evaluation in two different simulation
environments helped to validate the initially achieved results. The
developed soft cubic actuator was then employed to develop different mechanisms
in a single unit configuration as well as multi-unit robotic system
developments.
This design scheme is considered as the first tool to investigate its capacity
to perform certain given tasks in various configurations. Alongside
its application as a single unit gripper and a two unit bio-mimetic crawling
mechanism, this soft actuator has been employed to realize a four degree
ix
of freedom robotic mechanism. The formation of this primitive soft robotic
four axis mechanism is being further considered to develop an equivalent
mechanism similar to the well known Stewart platform, with advantages of
compactness, simpler kinematics design, easier control, and lesser cost.
Overall, the accomplished results indicate that the design scheme of Soft
Cubic Module is helpful in realizing a simple and cost-effective soft pneumatic
actuator which is modular and scalable. Another favourable point of
this scheme is the use of a single material with convenient fabrication and
handling
Advanced Strategies for Robot Manipulators
Amongst the robotic systems, robot manipulators have proven themselves to be of increasing importance and are widely adopted to substitute for human in repetitive and/or hazardous tasks. Modern manipulators are designed complicatedly and need to do more precise, crucial and critical tasks. So, the simple traditional control methods cannot be efficient, and advanced control strategies with considering special constraints are needed to establish. In spite of the fact that groundbreaking researches have been carried out in this realm until now, there are still many novel aspects which have to be explored