9,975 research outputs found
Cycle-accurate evaluation of reconfigurable photonic networks-on-chip
There is little doubt that the most important limiting factors of the performance of next-generation Chip Multiprocessors (CMPs) will be the power efficiency and the available communication speed between cores. Photonic Networks-on-Chip (NoCs) have been suggested as a viable route to relieve the off- and on-chip interconnection bottleneck. Low-loss integrated optical waveguides can transport very high-speed data signals over longer distances as compared to on-chip electrical signaling. In addition, with the development of silicon microrings, photonic switches can be integrated to route signals in a data-transparent way. Although several photonic NoC proposals exist, their use is often limited to the communication of large data messages due to a relatively long set-up time of the photonic channels. In this work, we evaluate a reconfigurable photonic NoC in which the topology is adapted automatically (on a microsecond scale) to the evolving traffic situation by use of silicon microrings. To evaluate this system's performance, the proposed architecture has been implemented in a detailed full-system cycle-accurate simulator which is capable of generating realistic workloads and traffic patterns. In addition, a model was developed to estimate the power consumption of the full interconnection network which was compared with other photonic and electrical NoC solutions. We find that our proposed network architecture significantly lowers the average memory access latency (35% reduction) while only generating a modest increase in power consumption (20%), compared to a conventional concentrated mesh electrical signaling approach. When comparing our solution to high-speed circuit-switched photonic NoCs, long photonic channel set-up times can be tolerated which makes our approach directly applicable to current shared-memory CMPs
A Benes Based NoC Switching Architecture for Mixed Criticality Embedded Systems
Multi-core, Mixed Criticality Embedded (MCE) real-time systems require high
timing precision and predictability to guarantee there will be no interference
between tasks. These guarantees are necessary in application areas such as
avionics and automotive, where task interference or missed deadlines could be
catastrophic, and safety requirements are strict. In modern multi-core systems,
the interconnect becomes a potential point of uncertainty, introducing major
challenges in proving behaviour is always within specified constraints,
limiting the means of growing system performance to add more tasks, or provide
more computational resources to existing tasks.
We present MCENoC, a Network-on-Chip (NoC) switching architecture that
provides innovations to overcome this with predictable, formally verifiable
timing behaviour that is consistent across the whole NoC. We show how the
fundamental properties of Benes networks benefit MCE applications and meet our
architecture requirements. Using SystemVerilog Assertions (SVA), formal
properties are defined that aid the refinement of the specification of the
design as well as enabling the implementation to be exhaustively formally
verified. We demonstrate the performance of the design in terms of size,
throughput and predictability, and discuss the application level considerations
needed to exploit this architecture
DeSyRe: on-Demand System Reliability
The DeSyRe project builds on-demand adaptive and reliable Systems-on-Chips (SoCs). As fabrication technology scales down, chips are becoming less reliable, thereby incurring increased power and performance costs for fault tolerance. To make matters worse, power density is becoming a significant limiting factor in SoC design, in general. In the face of such changes in the technological landscape, current solutions for fault tolerance are expected to introduce excessive overheads in future systems. Moreover, attempting to design and manufacture a totally defect and fault-free system, would impact heavily, even prohibitively, the design, manufacturing, and testing costs, as well as the system performance and power consumption. In this context, DeSyRe delivers a new generation of systems that are reliable by design at well-balanced power, performance, and design costs. In our attempt to reduce the overheads of fault-tolerance, only a small fraction of the chip is built to be fault-free. This fault-free part is then employed to manage the remaining fault-prone resources of the SoC. The DeSyRe framework is applied to two medical systems with high safety requirements (measured using the IEC 61508 functional safety standard) and tight power and performance constraints
Driving the Network-on-Chip Revolution to Remove the Interconnect Bottleneck in Nanoscale Multi-Processor Systems-on-Chip
The sustained demand for faster, more powerful chips has been met by the
availability of chip manufacturing processes allowing for the integration of increasing
numbers of computation units onto a single die. The resulting outcome,
especially in the embedded domain, has often been called SYSTEM-ON-CHIP
(SoC) or MULTI-PROCESSOR SYSTEM-ON-CHIP (MP-SoC).
MPSoC design brings to the foreground a large number of challenges, one of
the most prominent of which is the design of the chip interconnection. With a
number of on-chip blocks presently ranging in the tens, and quickly approaching
the hundreds, the novel issue of how to best provide on-chip communication
resources is clearly felt.
NETWORKS-ON-CHIPS (NoCs) are the most comprehensive and scalable
answer to this design concern. By bringing large-scale networking concepts to
the on-chip domain, they guarantee a structured answer to present and future
communication requirements. The point-to-point connection and packet switching
paradigms they involve are also of great help in minimizing wiring overhead
and physical routing issues. However, as with any technology of recent inception,
NoC design is still an evolving discipline. Several main areas of interest
require deep investigation for NoCs to become viable solutions:
• The design of the NoC architecture needs to strike the best tradeoff among
performance, features and the tight area and power constraints of the onchip
domain.
• Simulation and verification infrastructure must be put in place to explore,
validate and optimize the NoC performance.
• NoCs offer a huge design space, thanks to their extreme customizability in
terms of topology and architectural parameters. Design tools are needed
to prune this space and pick the best solutions.
• Even more so given their global, distributed nature, it is essential to evaluate
the physical implementation of NoCs to evaluate their suitability for
next-generation designs and their area and power costs.
This dissertation performs a design space exploration of network-on-chip architectures,
in order to point-out the trade-offs associated with the design of
each individual network building blocks and with the design of network topology
overall. The design space exploration is preceded by a comparative analysis
of state-of-the-art interconnect fabrics with themselves and with early networkon-
chip prototypes. The ultimate objective is to point out the key advantages
that NoC realizations provide with respect to state-of-the-art communication
infrastructures and to point out the challenges that lie ahead in order to make
this new interconnect technology come true. Among these latter, technologyrelated
challenges are emerging that call for dedicated design techniques at all
levels of the design hierarchy. In particular, leakage power dissipation, containment
of process variations and of their effects. The achievement of the above
objectives was enabled by means of a NoC simulation environment for cycleaccurate
modelling and simulation and by means of a back-end facility for the
study of NoC physical implementation effects. Overall, all the results provided
by this work have been validated on actual silicon layout
On-board processing satellite network architecture and control study
The market for telecommunications services needs to be segmented into user classes having similar transmission requirements and hence similar network architectures. Use of the following transmission architecture was considered: satellite switched TDMA; TDMA up, TDM down; scanning (hopping) beam TDMA; FDMA up, TDM down; satellite switched MF/TDMA; and switching Hub earth stations with double hop transmission. A candidate network architecture will be selected that: comprises multiple access subnetworks optimized for each user; interconnects the subnetworks by means of a baseband processor; and optimizes the marriage of interconnection and access techniques. An overall network control architecture will be provided that will serve the needs of the baseband and satellite switched RF interconnected subnetworks. The results of the studies shall be used to identify elements of network architecture and control that require the greatest degree of technology development to realize an operational system. This will be specified in terms of: requirements of the enabling technology; difference from the current available technology; and estimate of the development requirements needed to achieve an operational system. The results obtained for each of these tasks are presented
VLSI implementation of a multi-mode turbo/LDPC decoder architecture
Flexible and reconfigurable architectures have gained wide popularity in the communications field. In particular, reconfigurable architectures for the physical layer are an attractive solution not only to switch among different coding modes but also to achieve interoperability. This work concentrates on the design of a reconfigurable architecture for both turbo and LDPC codes decoding. The novel contributions of this paper are: i) tackling the reconfiguration issue introducing a formal and systematic treatment that, to the best of our knowledge, was not previously addressed; ii) proposing a reconfigurable NoCbased turbo/LDPC decoder architecture and showing that wide flexibility can be achieved with a small complexity overhead. Obtained results show that dynamic switching between most of considered communication standards is possible without pausing the decoding activity. Moreover, post-layout results show that tailoring the proposed architecture to the WiMAX standard leads to an area occupation of 2.75 mm2 and a power consumption of 101.5 mW in the worst case
- …