92 research outputs found

    How much spatial information is lost in the sensory substitution process? Comparing visual, tactile, and auditory approaches

    Get PDF
    Sensory substitution devices (SSDs) can convey visuospatial information through spatialised auditory or tactile stimulation using wearable technology. However, the level of information loss associated with this transformation is unknown. In this study novice users discriminated the location of two objects at 1.2m using devices that transformed a 16x 8 depth map into spatially distributed patterns of light, sound, or touch on the abdomen. Results showed that through active sensing, participants could discriminate the vertical position of objects to a visual angle of 1°, 14°, and 21°, and their distance to 2cm, 8cm, and 29cm using these visual, auditory, and haptic SSDs respectively. Visual SSDs significantly outperformed auditory and tactile SSDs on vertical localisation, whereas for depth perception, all devices significantly differed from one another (visual > auditory > haptic). Our findings highlight the high level of acuity possible for SSDs even with low spatial resolutions (e.g. 16 8) and quantify the level of information loss attributable to this transformation for the SSD user. Finally, we discuss ways of closing this ‘modality gap’ found in SSDs and conclude that this process is best benchmarked against performance with SSDs that return to their primary modality (e.g. visuospatial into visual)

    Relative vibrotactile spatial acuity of the torso

    Get PDF
    While tactile acuity for pressure has been extensively investigated, far less is known about acuity for vibrotactile stimulation. Vibrotactile acuity is important however, as such stimulation is used in many applications, including sensory substitution devices. We tested discrimination of vibrotactile stimulation from eccentric rotating mass motors with in-plane vibration. In 3 experiments, we tested gradually decreasing center-to-center (c/c) distances from 30 mm (experiment 1) to 13 mm (experiment 3). Observers judged whether a second vibrating stimulator (‘tactor’) was to the left or right or in the same place as a first one that came on 250 ms before the onset of the second (with a 50-ms inter-stimulus interval). The results show that while accuracy tends to decrease the closer the tactors are, discrimination accuracy is still well above chance for the smallest distance, which places the threshold for vibrotactile stimulation well below 13 mm, which is lower than recent estimates. The results cast new light on vibrotactile sensitivity and can furthermore be of use in the design of devices that convey information through vibrotactile stimulation.Peer Reviewe

    Tactons: structured tactile messages for non-visual information display

    Get PDF
    Tactile displays are now becoming available in a form that can be easily used in a user interface. This paper describes a new form of tactile output. Tactons, or tactile icons, are structured, abstract messages that can be used to communicate messages non-visually. A range of different parameters can be used for Tacton construction including: frequency, amplitude and duration of a tactile pulse, plus other parameters such as rhythm and location. Tactons have the potential to improve interaction in a range of different areas, particularly where the visual display is overloaded, limited in size or not available, such as interfaces for blind people or in mobile and wearable devices. This paper describes Tactons, the parameters used to construct them and some possible ways to design them. Examples of where Tactons might prove useful in user interfaces are given

    Multisensory inclusive design with sensory substitution

    Get PDF

    HapticHead - Augmenting Reality via Tactile Cues

    Get PDF
    Information overload is increasingly becoming a challenge in today's world. Humans have only a limited amount of attention to allocate between sensory channels and tend to miss or misjudge critical sensory information when multiple activities are going on at the same time. For example, people may miss the sound of an approaching car when walking across the street while looking at their smartphones. Some sensory channels may also be impaired due to congenital or acquired conditions. Among sensory channels, touch is often experienced as obtrusive, especially when it occurs unexpectedly. Since tactile actuators can simulate touch, targeted tactile stimuli can provide users of virtual reality and augmented reality environments with important information for navigation, guidance, alerts, and notifications. In this dissertation, a tactile user interface around the head is presented to relieve or replace a potentially impaired visual channel, called \emph{HapticHead}. It is a high-resolution, omnidirectional, vibrotactile display that presents general, 3D directional, and distance information through dynamic tactile patterns. The head is well suited for tactile feedback because it is sensitive to mechanical stimuli and provides a large spherical surface area that enables the display of precise 3D information and allows the user to intuitively rotate the head in the direction of a stimulus based on natural mapping. Basic research on tactile perception on the head and studies on various use cases of head-based tactile feedback are presented in this thesis. Several investigations and user studies have been conducted on (a) the funneling illusion and localization accuracy of tactile stimuli around the head, (b) the ability of people to discriminate between different tactile patterns on the head, (c) approaches to designing tactile patterns for complex arrays of actuators, (d) increasing the immersion and presence level of virtual reality applications, and (e) assisting people with visual impairments in guidance and micro-navigation. In summary, tactile feedback around the head was found to be highly valuable as an additional information channel in various application scenarios. Most notable is the navigation of visually impaired individuals through a micro-navigation obstacle course, which is an order of magnitude more accurate than the previous state-of-the-art, which used a tactile belt as a feedback modality. The HapticHead tactile user interface's ability to safely navigate people with visual impairments around obstacles and on stairs with a mean deviation from the optimal path of less than 6~cm may ultimately improve the quality of life for many people with visual impairments.Die InformationsĂŒberlastung wird in der heutigen Welt zunehmend zu einer Herausforderung. Der Mensch hat nur eine begrenzte Menge an Aufmerksamkeit, die er zwischen den SinneskanĂ€len aufteilen kann, und neigt dazu, kritische Sinnesinformationen zu verpassen oder falsch einzuschĂ€tzen, wenn mehrere AktivitĂ€ten gleichzeitig ablaufen. Zum Beispiel können Menschen das GerĂ€usch eines herannahenden Autos ĂŒberhören, wenn sie ĂŒber die Straße gehen und dabei auf ihr Smartphone schauen. Einige SinneskanĂ€le können auch aufgrund von angeborenen oder erworbenen Erkrankungen beeintrĂ€chtigt sein. Unter den SinneskanĂ€len wird BerĂŒhrung oft als aufdringlich empfunden, besonders wenn sie unerwartet auftritt. Da taktile Aktoren BerĂŒhrungen simulieren können, können gezielte taktile Reize den Benutzern von Virtual- und Augmented Reality Anwendungen wichtige Informationen fĂŒr die Navigation, FĂŒhrung, Warnungen und Benachrichtigungen liefern. In dieser Dissertation wird eine taktile BenutzeroberflĂ€che um den Kopf herum prĂ€sentiert, um einen möglicherweise beeintrĂ€chtigten visuellen Kanal zu entlasten oder zu ersetzen, genannt \emph{HapticHead}. Es handelt sich um ein hochauflösendes, omnidirektionales, vibrotaktiles Display, das allgemeine, 3D-Richtungs- und Entfernungsinformationen durch dynamische taktile Muster darstellt. Der Kopf eignet sich gut fĂŒr taktiles Feedback, da er empfindlich auf mechanische Reize reagiert und eine große sphĂ€rische OberflĂ€che bietet, die die Darstellung prĂ€ziser 3D-Informationen ermöglicht und es dem Benutzer erlaubt, den Kopf aufgrund der natĂŒrlichen Zuordnung intuitiv in die Richtung eines Reizes zu drehen. Grundlagenforschung zur taktilen Wahrnehmung am Kopf und Studien zu verschiedenen AnwendungsfĂ€llen von kopfbasiertem taktilem Feedback werden in dieser Arbeit vorgestellt. Mehrere Untersuchungen und Nutzerstudien wurden durchgefĂŒhrt zu (a) der Funneling Illusion und der Lokalisierungsgenauigkeit von taktilen Reizen am Kopf, (b) der FĂ€higkeit von Menschen, zwischen verschiedenen taktilen Mustern am Kopf zu unterscheiden, (c) AnsĂ€tzen zur Gestaltung taktiler Muster fĂŒr komplexe Arrays von Aktoren, (d) der Erhöhung des Immersions- und PrĂ€senzgrades von Virtual-Reality-Anwendungen und (e) der UnterstĂŒtzung von Menschen mit Sehbehinderungen bei der FĂŒhrung und Mikronavigation. Zusammenfassend wurde festgestellt, dass taktiles Feedback um den Kopf herum als zusĂ€tzlicher Informationskanal in verschiedenen Anwendungsszenarien sehr wertvoll ist. Am interessantesten ist die Navigation von sehbehinderten Personen durch einen Mikronavigations-Hindernisparcours, welche um eine GrĂ¶ĂŸenordnung prĂ€ziser ist als der bisherige Stand der Technik, der einen taktilen GĂŒrtel als Feedback-ModalitĂ€t verwendete. Die FĂ€higkeit der taktilen Benutzerschnittstelle HapticHead, Menschen mit Sehbehinderungen mit einer mittleren Abweichung vom optimalen Pfad von weniger als 6~cm sicher um Hindernisse und auf Treppen zu navigieren, kann letztendlich die LebensqualitĂ€t vieler Menschen mit Sehbehinderungen verbessern

    Haptic wearables as sensory replacement, sensory augmentation and trainer - a review

    Get PDF
    Sensory impairments decrease quality of life and can slow or hinder rehabilitation. Small, computationally powerful electronics have enabled the recent development of wearable systems aimed to improve function for individuals with sensory impairments. The purpose of this review is to synthesize current haptic wearable research for clinical applications involving sensory impairments. We define haptic wearables as untethered, ungrounded body worn devices that interact with skin directly or through clothing and can be used in natural environments outside a laboratory. Results of this review are categorized by degree of sensory impairment. Total impairment, such as in an amputee, blind, or deaf individual, involves haptics acting as sensory replacement; partial impairment, as is common in rehabilitation, involves haptics as sensory augmentation; and no impairment involves haptics as trainer. This review found that wearable haptic devices improved function for a variety of clinical applications including: rehabilitation, prosthetics, vestibular loss, osteoarthritis, vision loss and hearing loss. Future haptic wearables development should focus on clinical needs, intuitive and multimodal haptic displays, low energy demands, and biomechanical compliance for long-term usage

    The Role of Haptics in Games

    Get PDF

    Creative Haptic Interface Design for the Aging Population

    Get PDF
    Audiovisual human-computer-interfaces still make up the majority of content to the public; however, haptic interfaces offer unique advantage over the dominant information infrastructure, particularly for users with a disability or diminishing cognitive and physical skills like the elderly. The tactile sense allows users to integrate new, unobstructive channels for digital information into their sensorium, one that is less likely to be overwhelmed compared to vision and audition. Haptics research focus on the development of hardware, improving resolution, modality, and fidelity of the actuators. Despite the technological limitations, haptic interfaces are shown to reinforce physical skill acquisition, therapy, and communication. This chapter will present key characteristics intuitive tactile interfaces should capture for elderly end-users; sample projects will showcase unique applications and designs that identify the limitations of the UI
    • 

    corecore