Machine Learning in Wireless Sensor Networks: Algorithms, Strategies, and Applications

Wireless sensor networks monitor dynamic environments that change rapidly over time. This dynamic behavior is either caused by external factors or initiated by the system designers themselves. To adapt to such conditions, sensor networks often adopt machine learning techniques to eliminate the need for unnecessary redesign. Machine learning also inspires many practical solutions that maximize resource utilization and prolong the lifespan of the network. In this paper, we present an extensive literature review over the period 2002-2013 of machine learning methods that were used to address common issues in wireless sensor networks (WSNs). The advantages and disadvantages of each proposed algorithm are evaluated against the corresponding problem. We also provide a comparative guide to aid WSN designers in developing suitable machine learning solutions for their specific application challenges.Comment: Accepted for publication in IEEE Communications Surveys and Tutorial

Concepts and evolution of research in the field of wireless sensor networks

The field of Wireless Sensor Networks (WSNs) is experiencing a resurgence of interest and a continuous evolution in the scientific and industrial community. The use of this particular type of ad hoc network is becoming increasingly important in many contexts, regardless of geographical position and so, according to a set of possible application. WSNs offer interesting low cost and easily deployable solutions to perform a remote real time monitoring, target tracking and recognition of physical phenomenon. The uses of these sensors organized into a network continue to reveal a set of research questions according to particularities target applications. Despite difficulties introduced by sensor resources constraints, research contributions in this field are growing day by day. In this paper, we present a comprehensive review of most recent literature of WSNs and outline open research issues in this field

NFK: a novel fault-tolerant K-mutual exclusion algorithm for mobile and opportunistic ad hoc networks

[EN] This paper presents a fault-tolerant algorithm ensuring multiple resources sharing in mobile ad hoc networks (MANETs) that is able to handle the known K-mutual exclusion problem in such mobile environments. The proposed algorithm relies on a token-based strategy, and requires information about resources and their use to be carried in routing protocol control messages. This way, our solution avoids any additional exchange of messages. Furthermore, experimental results show that it offers a fast response time. Moreover, we introduce a dual-layer fault-tolerance mechanism that tolerates the faults of several sites at the same time without affecting the well functioning of the system. Simulation results also evidence the high efficiency of our proposal, which achieves reduced overhead and response delay even in the presence of critical situations where multiple simultaneous faults occur.Allaoui, T.; Yagoubi, MB.; Kerrache, CA.; Tavares De Araujo Cesariny Calafate, CM. (2019). NFK: a novel fault-tolerant K-mutual exclusion algorithm for mobile and opportunistic ad hoc networks. International Journal of Information and Communication Technology. 15(2):176-197. https://doi.org/10.1504/IJICT.2019.102479S17619715

Hybrid routing and bridging strategies for large scale mobile ad hoc networks

Multi-hop packet radio networks (or mobile ad-hoc networks) are an ideal technology to establish instant communication infrastructure for military and civilian applications in which both hosts and routers are mobile. In this dissertation, a position-based/link-state hybrid, proactive routing protocol (Position-guided Sliding-window Routing - PSR) that provides for a flat, mobile ad-hoc routing architecture is described, analyzed and evaluated. PSR is based on the superposition of link-state and position-based routing, and it employs a simplified way of localizing routing overhead, without having to resort to complex, multiple-tier routing organization schemes. A set of geographic routing zones is defined for each node, where the purpose of the ith routing zone is to restrict propagation of position updates, advertising position differentials equal to the radius of the (i-i )th routing zone. Thus, the proposed protocol controls position-update overhead generation and propagation by making the overhead generation rate and propagation distance directly proportional to the amount of change in a node\u27s geographic position. An analytical model and framework is provided, in order to study the various design issues and trade-offs of PSR routing mechanism, discuss their impact on the protocol\u27s operation and effectiveness, and identify optimal values for critical design parameters, under different mobility scenarios. In addition an in-depth performance evaluation, via modeling and simulation, was performed in order to demonstrate PSR\u27s operational effectiveness in terms of scalability, mobility support, and efficiency. Furthermore, power and energy metrics, such as path fading and battery capacity considerations, are integrated into the routing decision (cost function) in order to improve PSR\u27s power efficiency and network lifetime. It is demonstrated that the proposed routing protocol is ideal for deployment and implementation especially in large scale mobile ad hoc networks. Wireless local area networks (WLAN) are being deployed widely to support networking needs of both consumer and enterprise applications, and IEEE 802.11 specification is becoming the de facto standard for deploying WLAN. However IEEE 802.11 specifications allow only one hop communication between nodes. A layer-2 bridging solution is proposed in this dissertation, to increase the range of 802.11 base stations using ad hoc networking, and therefore solve the hotspot communication problem, where a large number of mobile users require Internet access through an access point. In the proposed framework nodes are divided into levels based on their distance (hops) from the access point. A layer-2 bridging tree is built based on the level concept, and a node in certain level only forwards packets to nodes in its neighboring level. The specific mechanisms for the forwarding tree establishment as well as for the data propagation are also introduced and discussed. An analytical model is also presented in order to analyze the saturation throughput of the proposed mechanism, while its applicability and effectiveness is evaluated via modeling and simulation. The corresponding numerical results demonstrate and confirm the significant area coverage extension that can be achieved by the solution, when compared with the conventional 802.1 lb scheme. Finally, for implementation purposes, a hierarchical network structure paradigm based on the combination of these two protocols and models is introduced

Proactive Highly Ambulatory Sensor Routing (PHASeR) protocol for mobile wireless sensor networks

This paper presents a novel multihop routing protocol for mobile wireless sensor networks called PHASeR (Proactive Highly Ambulatory Sensor Routing). The proposed protocol uses a simple hop-count metric to enable the dynamic and robust routing of data towards the sink in mobile environments. It is motivated by the application of radiation mapping by unmanned vehicles, which requires the reliable and timely delivery of regular measurements to the sink. PHASeR maintains a gradient metric in mobile environments by using a global TDMA MAC layer. It also uses the technique of blind forwarding to pass messages through the network in a multipath manner. PHASeR is analysed mathematically based on packet delivery ratio, average packet delay, throughput and overhead. It is then simulated with varying mobility, scalability and traffic loads. The protocol gives good results over all measures, which suggests that it may also be suitable for a wider array of emerging applications

Design and Implementation of a Communication Protocol to Improve Multimedia QoS and QoE in Wireless Ad Hoc Networks

[EN] This dissertation addresses the problem of multimedia delivery over multi-hop ad hoc wireless networks, and especially over wireless sensor networks. Due to their characteristics of low power consumption, low processing capacity and low memory capacity, they have major difficulties in achieving optimal quality levels demanded by end users in such communications. In the first part of this work, it has been carried out a study to determine the behavior of a variety of multimedia streams and how they are affected by the network conditions when they are transmitted over topologies formed by devices of different technologies in multi hop wireless ad hoc mode. To achieve this goal, we have performed experimental tests using a test bench, which combine the main codecs used in audio and video streaming over IP networks with different sound and video captures representing the characteristic patterns of multimedia services such as phone calls, video communications, IPTV and video on demand (VOD). With the information gathered in the laboratory, we have been able to establish the correlation between the induced changes in the physical and logical topology and the network parameters that measure the quality of service (QoS) of a multimedia transmission, such as latency, jitter or packet loss. At this stage of the investigation, a study was performed to determine the state of the art of the proposed protocols, algorithms, and practical implementations that have been explicitly developed to optimize the multimedia transmission over wireless ad hoc networks, especially in ad hoc networks using clusters of nodes distributed over a geographic area and wireless sensor networks. Next step of this research was the development of an algorithm focused on the logical organization of clusters formed by nodes capable of adapting to the circumstances of real-time traffic. The stated goal was to achieve the maximum utilization of the resources offered by the set of nodes that forms the network, allowing simultaneously sending reliably and efficiently all types of content through them, and mixing conventional IP data traffic with multimedia traffic with stringent QoS and QoE requirements. Using the information gathered in the previous phase, we have developed a network architecture that improves overall network performance and multimedia streaming. In parallel, it has been designed and programmed a communication protocol that allows implementing the proposal and testing its operation on real network infrastructures. In the last phase of this thesis we have focused our work on sending multimedia in wireless sensor networks (WSN). Based on the above results, we have adapted both the architecture and the communication protocol for this particular type of network, whose use has been growing hugely in recent years.[ES] Esta tesis doctoral aborda el problema de la distribución de contenidos multimedia a través de redes inalámbricas ad hoc multisalto, especialmente las redes inalámbricas de sensores que, debido a sus características de bajo consumo energético, baja capacidad de procesamiento y baja capacidad de memoria, plantean grandes dificultades para alcanzar los niveles de calidad óptimos que exigen los usuarios finales en dicho tipo de comunicaciones. En la primera parte de este trabajo se ha llevado a cabo un estudio para determinar el comportamiento de una gran variedad de flujos multimedia y como se ven afectados por las condiciones de la red cuando son transmitidos a través topologías formadas por dispositivos de diferentes tecnologías que se comunican en modo ad hoc multisalto inalámbrico. Para ello, se han realizado pruebas experimentales sobre una maqueta de laboratorio, combinando los principales códecs empleados en la transmisión de audio y video a través de redes IP con diversas capturas de sonido y video que representan patrones característicos de servicios multimedia tales como las llamadas telefónicas, videoconferencias, IPTV o video bajo demanda (VOD). Con la información reunida en el laboratorio se ha podido establecer la correlación entre los cambios inducidos en la topología física y lógica de la red con los parámetros que miden la calidad de servicio (QoS) de una transmisión multimedia, tales como la latencia el jitter o la pérdida de paquetes. En esta fase de la investigación se realiza un estudio para determinar el estado del arte de las propuestas de desarrollo e implementación de protocolos y algoritmos que se han generado de forma explícita para optimizar la transmisión de tráfico multimedia sobre redes ad hoc inalámbricas, especialmente en las redes inalámbricas de sensores y redes ad hoc utilizando clústeres de nodos distribuidos en un espacio geográfico. El siguiente paso en la investigación ha consistido en el desarrollo de un algoritmo propio para la organización lógica de clústeres formados por nodos capaces de adaptarse a las circunstancias del tráfico en tiempo real. El objetivo planteado es conseguir un aprovechamiento máximo de los recursos ofrecidos por el conjunto de nodos que forman la red, permitiendo de forma simultánea el envío de todo tipo de contenidos a través de ellos de forma confiable y eficiente, permitiendo la convivencia de tráfico de datos IP convencional con tráfico multimedia con requisitos exigentes de QoS y QoE. A partir de la información conseguida en la fase anterior, se ha desarrollado una arquitectura de red que mejora el rendimiento general de la red y el de las transmisiones multimedia de audio y video en particular. De forma paralela, se ha diseñado y programado un protocolo de comunicación que permite implementar el modelo y testear su funcionamiento sobre infraestructuras de red reales. En la última fase de esta tesis se ha dirigido la atención hacia la transmisión multimedia en las redes de sensores inalámbricos (WSN). Partiendo de los resultados anteriores, se ha adaptado tanto la arquitectura como el protocolo de comunicaciones para este tipo concreto de red, cuyo uso se ha extendido en los últimos años de forma considerable[CA] Esta tesi doctoral aborda el problema de la distribució de continguts multimèdia a través de xarxes sense fil ad hoc multi salt, especialment les xarxes sense fil de sensors que, a causa de les seues característiques de baix consum energètic, baixa capacitat de processament i baixa capacitat de memòria, plantegen grans dificultats per a aconseguir els nivells de qualitat òptims que exigixen els usuaris finals en eixos tipus de comunicacions. En la primera part d'este treball s'ha dut a terme un estudi per a determinar el comportament d'una gran varietat de fluxos multimèdia i com es veuen afectats per les condicions de la xarxa quan són transmesos a través topologies formades per dispositius de diferents tecnologies que es comuniquen en mode ad hoc multi salt sense fil. Per a això, s'han realitzat proves experimentals sobre una maqueta de laboratori, combinant els principals códecs empleats en la transmissió d'àudio i vídeo a través de xarxes IP amb diverses captures de so i vídeo que representen patrons característics de serveis multimèdia com son les cridades telefòniques, videoconferències, IPTV o vídeo baix demanda (VOD). Amb la informació reunida en el laboratori s'ha pogut establir la correlació entre els canvis induïts en la topologia física i lògica de la xarxa amb els paràmetres que mesuren la qualitat de servei (QoS) d'una transmissió multimèdia, com la latència el jitter o la pèrdua de paquets. En esta fase de la investigació es realitza un estudi per a determinar l'estat de l'art de les propostes de desenvolupament i implementació de protocols i algoritmes que s'han generat de forma explícita per a optimitzar la transmissió de tràfic multimèdia sobre xarxes ad hoc sense fil, especialment en les xarxes sense fil de sensors and xarxes ad hoc utilitzant clusters de nodes distribuïts en un espai geogràfic. El següent pas en la investigació ha consistit en el desenvolupament d'un algoritme propi per a l'organització lògica de clusters formats per nodes capaços d'adaptar-se a les circumstàncies del tràfic en temps real. L'objectiu plantejat és aconseguir un aprofitament màxim dels recursos oferits pel conjunt de nodes que formen la xarxa, permetent de forma simultània l'enviament de qualsevol tipus de continguts a través d'ells de forma confiable i eficient, permetent la convivència de tràfic de dades IP convencional amb tràfic multimèdia amb requisits exigents de QoS i QoE. A partir de la informació aconseguida en la fase anterior, s'ha desenvolupat una arquitectura de xarxa que millora el rendiment general de la xarxa i el de les transmissions multimèdia d'àudio i vídeo en particular. De forma paral¿lela, s'ha dissenyat i programat un protocol de comunicació que permet implementar el model i testejar el seu funcionament sobre infraestructures de xarxa reals. En l'última fase d'esta tesi s'ha dirigit l'atenció cap a la transmissió multimèdia en les xarxes de sensors sense fil (WSN). Partint dels resultats anteriors, s'ha adaptat tant l'arquitectura com el protocol de comunicacions per a aquest tipus concret de xarxa, l'ús del qual s'ha estés en els últims anys de forma considerable.Díaz Santos, JR. (2016). Design and Implementation of a Communication Protocol to Improve Multimedia QoS and QoE in Wireless Ad Hoc Networks [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/62162TESI