CD-Xbar : a converge-diverge crossbar network for high-performance GPUs

Modern GPUs feature an increasing number of streaming multiprocessors (SMs) to boost system throughput. How to construct an efficient and scalable network-on-chip (NoC) for future high-performance GPUs is particularly critical. Although a mesh network is a widely used NoC topology in manycore CPUs for scalability and simplicity reasons, it is ill-suited to GPUs because of the many-to-few-to-many traffic pattern observed in GPU-compute workloads. Although a crossbar NoC is a natural fit, it does not scale to large SM counts while operating at high frequency. In this paper, we propose the converge-diverge crossbar (CD-Xbar) network with round-robin routing and topology-aware concurrent thread array (CTA) scheduling. CD-Xbar consists of two types of crossbars, a local crossbar and a global crossbar. A local crossbar converges input ports from the SMs into so-called converged ports; the global crossbar diverges these converged ports to the last-level cache (LLC) slices and memory controllers. CD-Xbar provides routing path diversity through the converged ports. Round-robin routing and topology-aware CTA scheduling balance network traffic among the converged ports within a local crossbar and across crossbars, respectively. Compared to a mesh with the same bisection bandwidth, CD-Xbar reduces NoC active silicon area and power consumption by 52.5 and 48.5 percent, respectively, while at the same time improving performance by 13.9 percent on average. CD-Xbar performs within 2.9 percent of an idealized fully-connected crossbar. We further demonstrate CD-Xbar's scalability, flexibility and improved performance perWatt (by 17.1 percent) over state-of-the-art GPU NoCs which are highly customized and non-scalable

Adaptive memory-side last-level GPU caching

Emerging GPU applications exhibit increasingly high computation demands which has led GPU manufacturers to build GPUs with an increasingly large number of streaming multiprocessors (SMs). Providing data to the SMs at high bandwidth puts significant pressure on the memory hierarchy and the Network-on-Chip (NoC). Current GPUs typically partition the memory-side last-level cache (LLC) in equally-sized slices that are shared by all SMs. Although a shared LLC typically results in a lower miss rate, we find that for workloads with high degrees of data sharing across SMs, a private LLC leads to a significant performance advantage because of increased bandwidth to replicated cache lines across different LLC slices. In this paper, we propose adaptive memory-side last-level GPU caching to boost performance for sharing-intensive workloads that need high bandwidth to read-only shared data. Adaptive caching leverages a lightweight performance model that balances increased LLC bandwidth against increased miss rate under private caching. In addition to improving performance for sharing-intensive workloads, adaptive caching also saves energy in a (co-designed) hierarchical two-stage crossbar NoC by power-gating and bypassing the second stage if the LLC is configured as a private cache. Our experimental results using 17 GPU workloads show that adaptive caching improves performance by 28.1% on average (up to 38.1%) compared to a shared LLC for sharing-intensive workloads. In addition, adaptive caching reduces NoC energy by 26.6% on average (up to 29.7%) and total system energy by 6.1% on average (up to 27.2%) when configured as a private cache. Finally, we demonstrate through a GPU NoC design space exploration that a hierarchical two-stage crossbar is both more power- and area-efficient than full and concentrated crossbars with the same bisection bandwidth, thus providing a low-cost cooperative solution to exploit workload sharing behavior in memory-side last-level caches

Doctor of Philosophy

dissertationPortable electronic devices will be limited to available energy of existing battery chemistries for the foreseeable future. However, system-on-chips (SoCs) used in these devices are under a demand to offer more functionality and increased battery life. A difficult problem in SoC design is providing energy-efficient communication between its components while maintaining the required performance. This dissertation introduces a novel energy-efficient network-on-chip (NoC) communication architecture. A NoC is used within complex SoCs due it its superior performance, energy usage, modularity, and scalability over traditional bus and point-to-point methods of connecting SoC components. This is the first academic research that combines asynchronous NoC circuits, a focus on energy-efficient design, and a software framework to customize a NoC for a particular SoC. Its key contribution is demonstrating that a simple, asynchronous NoC concept is a good match for low-power devices, and is a fruitful area for additional investigation. The proposed NoC is energy-efficient in several ways: simple switch and arbitration logic, low port radix, latch-based router buffering, a topology with the minimum number of 3-port routers, and the asynchronous advantages of zero dynamic power consumption while idle and the lack of a clock tree. The tool framework developed for this work uses novel methods to optimize the topology and router oorplan based on simulated annealing and force-directed movement. It studies link pipelining techniques that yield improved throughput in an energy-efficient manner. A simulator is automatically generated for each customized NoC, and its traffic generators use a self-similar message distribution, as opposed to Poisson, to better match application behavior. Compared to a conventional synchronous NoC, this design is superior by achieving comparable message latency with half the energy

Studies in Exascale Computer Architecture: Interconnect, Resiliency, and Checkpointing

Today’s supercomputers are built from the state-of-the-art components to extract as much performance as possible to solve the most computationally intensive problems in the world. Building the next generation of exascale supercomputers, however, would require re-architecting many of these components to extract over 50x more performance than the current fastest supercomputer in the United States. To contribute towards this goal, two aspects of the compute node architecture were examined in this thesis: the on-chip interconnect topology and the memory and storage checkpointing platforms. As a first step, a skeleton exascale system was modeled to meet 1 exaflop of performance along with 100 petabytes of main memory. The model revealed that large kilo-core processors would be necessary to meet the exaflop performance goal; existing topologies, however, would not scale to those levels. To address this new challenge, we investigated and proposed asymmetric high-radix topologies that decoupled local and global communications and used different radix routers for switching network traffic at each level. The proposed topologies scaled more readily to higher numbers of cores with better latency and energy consumption than before. The vast number of components that the model revealed would be needed in these exascale systems cautioned towards better fault tolerance mechanisms. To address this challenge, we showed that local checkpoints within the compute node can be saved to a hybrid DRAM and SSD platform in order to write them faster without wearing out the SSD or consuming a lot of energy. A hybrid checkpointing platform allowed more frequent checkpoints to be made without sacrificing performance. Subsequently, we proposed switching to a DIMM-based SSD in order to perform fine-grained I/O operations that would be integral in interleaving checkpointing and computation while still providing persistence guarantees. Two more techniques that consolidate and overlap checkpointing were designed to better hide the checkpointing latency to the SSD.PHDComputer Science & EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttps://deepblue.lib.umich.edu/bitstream/2027.42/137096/1/sabeyrat_1.pd