Introduction to Logic Circuits & Logic Design with Verilog

The overall goal of this book is to fill a void that has appeared in the instruction of digital circuits over the past decade due to the rapid abstraction of system design. Up until the mid-1980s, digital circuits were designed using classical techniques. Classical techniques relied heavily on manual design practices for the synthesis, minimization, and interfacing of digital systems. Corresponding to this design style, academic textbooks were developed that taught classical digital design techniques. Around 1990, large-scale digital systems began being designed using hardware description languages (HDL) and automated synthesis tools. Broad-scale adoption of this modern design approach spread through the industry during this decade. Around 2000, hardware description languages and the modern digital design approach began to be taught in universities, mainly at the senior and graduate level. There were a variety of reasons that the modern digital design approach did not penetrate the lower levels of academia during this time. First, the design and simulation tools were difficult to use and overwhelmed freshman and sophomore students. Second, the ability to implement the designs in a laboratory setting was infeasible. The modern design tools at the time were targeted at custom integrated circuits, which are cost- and time-prohibitive to implement in a university setting. Between 2000 and 2005, rapid advances in programmable logic and design tools allowed the modern digital design approach to be implemented in a university setting, even in lower-level courses. This allowed students to learn the modern design approach based on HDLs and prototype their designs in real hardware, mainly fieldprogrammable gate arrays (FPGAs). This spurred an abundance of textbooks to be authored, teaching hardware description languages and higher levels of design abstraction. This trend has continued until today. While abstraction is a critical tool for engineering design, the rapid movement toward teaching only the modern digital design techniques has left a void for freshman- and sophomore-level courses in digital circuitry. Legacy textbooks that teach the classical design approach are outdated and do not contain sufficient coverage of HDLs to prepare the students for follow-on classes. Newer textbooks that teach the modern digital design approach move immediately into high-level behavioral modeling with minimal or no coverage of the underlying hardware used to implement the systems. As a result, students are not being provided the resources to understand the fundamental hardware theory that lies beneath the modern abstraction such as interfacing, gate-level implementation, and technology optimization. Students moving too rapidly into high levels of abstraction have little understanding of what is going on when they click the “compile and synthesize” button of their design tool. This leads to graduates who can model a breadth of different systems in an HDL but have no depth into how the system is implemented in hardware. This becomes problematic when an issue arises in a real design and there is no foundational knowledge for the students to fall back on in order to debug the problem

Introduction to Logic Circuits & Logic Design with VHDL

The overall goal of this book is to fill a void that has appeared in the instruction of digital circuits over the past decade due to the rapid abstraction of system design. Up until the mid-1980s, digital circuits were designed using classical techniques. Classical techniques relied heavily on manual design practices for the synthesis, minimization, and interfacing of digital systems. Corresponding to this design style, academic textbooks were developed that taught classical digital design techniques. Around 1990, large-scale digital systems began being designed using hardware description languages (HDL) and automated synthesis tools. Broad-scale adoption of this modern design approach spread through the industry during this decade. Around 2000, hardware description languages and the modern digital design approach began to be taught in universities, mainly at the senior and graduate level. There were a variety of reasons that the modern digital design approach did not penetrate the lower levels of academia during this time. First, the design and simulation tools were difficult to use and overwhelmed freshman and sophomore students. Second, the ability to implement the designs in a laboratory setting was infeasible. The modern design tools at the time were targeted at custom integrated circuits, which are cost- and time-prohibitive to implement in a university setting. Between 2000 and 2005, rapid advances in programmable logic and design tools allowed the modern digital design approach to be implemented in a university setting, even in lower-level courses. This allowed students to learn the modern design approach based on HDLs and prototype their designs in real hardware, mainly field programmable gate arrays (FPGAs). This spurred an abundance of textbooks to be authored teaching hardware description languages and higher levels of design abstraction. This trend has continued until today. While abstraction is a critical tool for engineering design, the rapid movement toward teaching only the modern digital design techniques has left a void for freshman- and sophomore-level courses in digital circuitry. Legacy textbooks that teach the classical design approach are outdated and do not contain sufficient coverage of HDLs to prepare the students for follow-on classes. Newer textbooks that teach the modern digital design approach move immediately into high-level behavioral modeling with minimal or no coverage of the underlying hardware used to implement the systems. As a result, students are not being provided the resources to understand the fundamental hardware theory that lies beneath the modern abstraction such as interfacing, gate-level implementation, and technology optimization. Students moving too rapidly into high levels of abstraction have little understanding of what is going on when they click the “compile and synthesize” button of their design tool. This leads to graduates who can model a breadth of different systems in an HDL but have no depth into how the system is implemented in hardware. This becomes problematic when an issue arises in a real design and there is no foundational knowledge for the students to fall back on in order to debug the problem

Decomposition and encoding of finite state machines for FPGA implementation

xii+187hlm.;24c

Development of the control system of the ALICE Transition Radiation Detector and of a test environment for quality-assurance of its front-end electronics

Im Rahmen dieser Arbeit wurde das Detektor-Kontroll-System (DCS) für den Übergangsstrahlungsdetektor (TRD) des ALICE Experiments am Large Hadron Collider entwickelt. Das TRD Kontrollsystem ist vollständig implementiert als eine detektororientierte Hierarchie von Objekten, welche sich wie End-Zustandsautomaten verhalten. Es kontrolliert und überwacht über 65 tausend front-end Elektronik (FEE) Einheiten, einige hundert low-voltage und eintausend high-voltage Kanäle, sowie weitere Subsysteme wie Kühlung und Gasversorgung. Die Inbetriebnahme des TRD Kontrollsystems fand während mehrerer Datennahmen mit ALICE unter Verwendung von Ereignissen aus der kosmischen Strahlung statt. In einem weiteren Teil dieser Arbeit wurde ein Test-setup zur Qualitätssicherung der Massenproduktion von über viertausend FEE Readout-boards mit insgesamt 1.2 Millionen elektronischen Auslesekanälen des TRD entwickelt. Die Hardware- und Softwarekomponenten werden im Detail beschrieben. Zusätzlich wurde vorher eine Reihe von Leistungsuntersuchungen durchgeführt, welche die Strahlungstoleranz des TRAP-chips überprüft, der den Haupt\-bestandteil der TRD-FEE darstellt

Evolutionary algorithms for synthesis and optimisation of sequential logic circuits

Considerable progress has been made recently 1n the understanding of combinational logic optimization. Consequently a large number of university and industrial Electric Computing Aided Design (ECAD) programs are now available for optimal logic synthesis of combinational circuits. The progress with sequential logic synthesis and optimization, on the other hand, is considerably less mature. In recent years, evolutionary algorithms have been found to be remarkably effective way of using computers for solving difficult problems. This thesis is, in large part, a concentrated effort to apply this philosophy to the synthesis and optimization of sequential circuits. A state assignment based on the use of a Genetic Algorithm (GA) for the optimal synthesis of sequential circuits is presented. The state assignment determines the structure of the sequential circuit realizing the state machine and therefore its area and performances. The synthesis based on the GA approach produced designs with the smallest area to date. Test results on standard fmite state machine (FS:M) benchmarks show that the GA could generate state assignments, which required on average 15.44% fewer gates and 13.47% fewer literals compared with alternative techniques. Hardware evolution is performed through a succeSSlOn of changes/reconfigurations of elementary components, inter-connectivity and selection of the fittest configurations until the target functionality is reached. The thesis presents new approaches, which combine both genetic algorithm for state assignment and extrinsic Evolvable Hardware (EHW) to design sequential logic circuits. The implemented evolutionary algorithms are able to design logic circuits with size and complexity, which have not been demonstrated in published work. There are still plenty of opportunities to develop this new line of research for the synthesis, optimization and test of novel digital, analogue and mixed circuits. This should lead to a new generation of Electronic Design Automation tools.EThOS - Electronic Theses Online ServiceGBUnited Kingdo

Evolutionary algorithms for synthesis and optimisation of sequential logic circuits.

Considerable progress has been made recently 1n the understanding ofcombinational logic optimization. Consequently a large number of universityand industrial Electric Computing Aided Design (ECAD) programs are nowavailable for optimal logic synthesis of combinational circuits. The progresswith sequential logic synthesis and optimization, on the other hand, isconsiderably less mature.In recent years, evolutionary algorithms have been found to be remarkablyeffective way of using computers for solving difficult problems. This thesis is,in large part, a concentrated effort to apply this philosophy to the synthesisand optimization of sequential circuits.A state assignment based on the use of a Genetic Algorithm (GA) for theoptimal synthesis of sequential circuits is presented. The state assignmentdetermines the structure of the sequential circuit realizing the state machineand therefore its area and performances. The synthesis based on the GAapproach produced designs with the smallest area to date. Test results onstandard fmite state machine (FS:M) benchmarks show that the GA couldgenerate state assignments, which required on average 15.44% fewer gatesand 13.47% fewer literals compared with alternative techniques.Hardware evolution is performed through a succeSSlOn ofchanges/reconfigurations of elementary components, inter-connectivity andselection of the fittest configurations until the target functionality is reached.The thesis presents new approaches, which combine both genetic algorithmfor state assignment and extrinsic Evolvable Hardware (EHW) to designsequential logic circuits. The implemented evolutionary algorithms are able todesign logic circuits with size and complexity, which have not beendemonstrated in published work.There are still plenty of opportunities to develop this new line of research forthe synthesis, optimization and test of novel digital, analogue and mixedcircuits. This should lead to a new generation of Electronic DesignAutomation tools

Développement de circuits logiques programmables résistants aux alas logiques en technologie CMOS submicrométrique

The electronics associated to the particle detectors of the Large Hadron Collider (LHC), under construction at CERN, will operate in a very harsh radiation environment. Most of the microelectronics components developed for the first generation of LHC experiments have been designed with very precise experiment-specific goals and are hardly adaptable to other applications. Commercial Off-The-Shelf (COTS) components cannot be used in the vicinity of particle collision due to their poor radiation tolerance. This thesis is a contribution to the effort to cover the need for radiation-tolerant SEU-robust programmable components for application in High Energy Physics (HEP) experiments. Two components are under development: a Programmable Logic Device (PLD) and a Field-Programmable Gate Array (FPGA). The PLD is a fuse-based, 10-input, 8-I/O general architecture device in 0.25 micron CMOS technology. The FPGA under development is instead a 32x32 logic block array, equivalent to ~25k gates, in 0.13 micron CMOS. This work focussed also on the research for an SEU-robust register in both the mentioned technologies. The SEU-robust register is employed as a user data flip-flop in the FPGA and PLD designs and as a configuration cell as well in the FPGA design

Efficient implementation of video processing algorithms on FPGA

The work contained in this portfolio thesis was carried out as part of an Engineering Doctorate (Eng.D) programme from the Institute for System Level Integration. The work was sponsored by Thales Optronics, and focuses on issues surrounding the implementation of video processing algorithms on field programmable gate arrays (FPGA). A description is given of FPGA technology and the currently dominant methods of designing and verifying firmware. The problems of translating a description of behaviour into one of structure are discussed, and some of the latest methodologies for tackling this problem are introduced. A number of algorithms are then looked at, including methods of contrast enhancement, deconvolution, and image fusion. Algorithms are characterised according to the nature of their execution flow, and this is used as justification for some of the design choices that are made. An efficient method of performing large two-dimensional convolutions is also described. The portfolio also contains a discussion of an FPGA implementation of a PID control algorithm, an overview of FPGA dynamic reconfigurability, and the development of a demonstration platform for rapid deployment of video processing algorithms in FPGA hardware