Open Source-based Over-The-Air 5G New Radio Sidelink Testbed

The focus of this paper is to demonstrate an over-the-air (OTA) 5G new radio (NR) sidelink communication prototype. 5G NR sidelink communications allow NR UEs to transfer data independently without the assistance of a base station (gNB), which enables V2X communications, including platooning, autonomous driving, sensor extension, industrial IoT, public safety communication and much more. Our design leverages the open-source OpenAirInterface5G (OAI) software, which operates on software-defined radios (SDRs) and can be easily extended for mesh networking. The software includes all signal processing components specified by the 3GPP 5G sidelink standards, including Low-Density Parity Check (LDPC) encoding/decoding, polar encoding/decoding, data and control multiplexing, modulation/demodulation, and orthogonal frequency-division multiplexing (OFDM) modulation/demodulation. It can be configured to operate with different bands, bandwidths, and antenna settings. The first milestone in this work was to demonstrate the completed Physical Sidelink Broadcast Channel (PSBCH) development, which conducts synchronization between a Synchronization Reference (SyncRef) UE and a nearby UE. The SyncRef UE broadcasts a sidelink synchronization signal block (S-SSB) periodically, which the nearby UE detects and uses to synchronize its timing and frequency components with the SyncRef UE. Once a connection is established, the next developmental milestone is to transmit real data (text messages) via the Physical Sidelink Shared Channel (PSSCH). Our PHY sidelink framework is tested using both an RF simulator and an OTA testbed with multiple nearby UEs. Beyond the development of synchronization and data transmission/reception in 5G sidelink, we conclude with various performance tests and validation experiments. The results of these metrics show that our simulator is comparable to the OTA testbed.Comment: 8 pages, 13 figures, Accepted for MILCOM 202

Link level imuslations for 5G remote area scenario

Abstract. The main object of this thesis is to utilize the Vienna 5G link-level simulator and to introduce modifications which are needed to include new scenarios, such as remote area case. The Vienna 5G link-level simulator is a simulation platform for promoting 5th generation (5G) research and development for the mobile communications system. This work gives a general overview of the link-level simulator platform to evaluate the average performance of the 5G physical layer (PHY) schemes. In many places across the world, there is no reliable internet connectivity in remote areas. Remote area connectivity is a kind of "missing scenario" of standard 5G solution, which focuses on improved data rate, latency, and massive internet of things (IoT). This work addresses views of connectivity in remote areas with 5G solutions, focusing on wireless radio technologies. The study of 5G physical layer performance evaluation is performed for downlink transmission using single-input and single-output (SISO) techniques. This thesis focused on the performance of waveforms, which can be effectively used in remote area communication systems. The analysis of the simulation results signifies that generalized frequency division multiplexing (GFDM) would be the better option for remote area communication than other waveforms investigated in this study. This work also focused on the performance of channel coding schemes in order to determine the appropriate channel coding scheme for the 5G mobile communication system for medium length message transmission in remote area communication. The polar code appears to be the best possible channel code for medium-length message data transmission in remote areas based on the study of channel coding schemes

A Flexible mmWave Layer 2 Protocol Implementation for Integrated Access and Backhaul Architecture

. This work was supported in part by the Spanish Ministry of Science, Innovation and Universities funded by MCIN/AEI/10.13039/501100011033 under Project PID2020-113979RB-C21; and in part by the Ministry of Economic Affairs and Digital Transformation and the European Union-NextGenerationEU under Project TSI-063000-2021-83 (DISRADIO). The work of Randy Verdecia-Peña was supported by the Ministry of Science and Innovation under Contract PRE2018-085032. Publisher Copyright: © 2013 IEEEIn this paper, we present a 3GPP-inspired hardware implementation for the out-of-band Integrated Access and Backhaul (IAB) network, which serves as a solution to both coverage extension and capacity boosting in 5G and beyond networks. By employing an Ettus x310 software-defined radio (SDR) board, Pasternack's 60 GHz Transmitter (Tx) waveguide module, and MatlabTM software, we design and develop an easy-to-use out-of-band mmWave Layer 2 protocol. The proposed protocol decodes a frequency range 1 (FR1) 5G signal as input at 3.5 GHz, which is retransmitted to the UE as a frequency range 2 (FR2) 5G signal at 60 GHz. In the implementation of the Layer 2 protocol, the least squares (LS) estimator is adopted by considering the demodulation reference signal (DM-RS) and the channel state information reference signal (CSI-RS) as pilot symbols in real-world environments. To alleviate the performance degradation in the mmWave access link, a phase noise cancellation (PNC) algorithm based on the phase tracking reference signal (PT-RS) is implemented at the UE node where a PT-RS block structure is introduced in the mmWave Layer 2 protocol transmitter stage. We review and evaluate the key performance indicators (KPIs) of the proposed Layer 2 protocol in real non-line-of-sight (NLOS) environments and a comparison between the gNode-to-UE link is carried out. Our results indicate that the performance of the proposed Layer 2 protocol is similar to the obtained with the off-the-shelf equipment demonstrating the right functionality of the developed algorithms. Experimental results evidence the superiority of the proposed Layer 2 protocol over the gNodeB-to-UE link (direct link communication) and the best performance is obtained when the PNC algorithm is considered in the IAB architecture.publishersversionpublishe

Learning Joint Detection, Equalization and Decoding for Short-Packet Communications

We propose and practically demonstrate a joint detection and decoding scheme for short-packet wireless communications in scenarios that require to first detect the presence of a message before actually decoding it. For this, we extend the recently proposed serial Turbo-autoencoder neural network (NN) architecture and train it to find short messages that can be, all "at once", detected, synchronized, equalized and decoded when sent over an unsynchronized channel with memory. The conceptional advantage of the proposed system stems from a holistic message structure with superimposed pilots for joint detection and decoding without the need of relying on a dedicated preamble. This results not only in higher spectral efficiency, but also translates into the possibility of shorter messages compared to using a dedicated preamble. We compare the detection error rate (DER), bit error rate (BER) and block error rate (BLER) performance of the proposed system with a hand-crafted state-of-the-art conventional baseline and our simulations show a significant advantage of the proposed autoencoder-based system over the conventional baseline in every scenario up to messages conveying k = 96 information bits. Finally, we practically evaluate and confirm the improved performance of the proposed system over-the-air (OTA) using a software-defined radio (SDR)-based measurement testbed.Comment: Submitted to IEEE TCO

A Proof of Concept for OTFS Resilience in Doubly-Selective Channels by GPU-Enabled Real-Time SDR

Orthogonal time frequency space (OTFS) is a modulation technique which is robust against the disruptive effects of doubly-selective channels. In this paper, we perform an experimental study of OTFS by a real-time software defined radio (SDR) setup. Our SDR consists of a Graphical Processing Unit (GPU) for signal processing programmed using Sionna and TensorFlow, and Universal Software Radio Peripheral (USRP) devices for air interface. We implement a low-latency transceiver structure for OTFS and investigate its performance under various Doppler values. By comparing the performance of OTFS with Orthogonal Frequency Division Multiplexing (OFDM), we demonstrate that OTFS is highly robust against the disruptive effects of doubly-selective channels in a real-time experimental setup.Comment: ACCEPTED for 2023 IEEE Global Communications Conference: Wireless Communication

Design, implementation and experimental evaluation of a network-slicing aware mobile protocol stack

Mención Internacional en el título de doctorWith the arrival of new generation mobile networks, we currently observe a paradigm shift, where monolithic network functions running on dedicated hardware are now implemented as software pieces that can be virtualized on general purpose hardware platforms. This paradigm shift stands on the softwarization of network functions and the adoption of virtualization techniques. Network Function Virtualization (NFV) comprises softwarization of network elements and virtualization of these components. It brings multiple advantages: (i) Flexibility, allowing an easy management of the virtual network functions (VNFs) (deploy, start, stop or update); (ii) efficiency, resources can be adequately consumed due to the increased flexibility of the network infrastructure; and (iii) reduced costs, due to the ability of sharing hardware resources. To this end, multiple challenges must be addressed to effectively leverage of all these benefits. Network Function Virtualization envisioned the concept of virtual network, resulting in a key enabler of 5G networks flexibility, Network Slicing. This new paradigm represents a new way to operate mobile networks where the underlying infrastructure is "sliced" into logically separated networks that can be customized to the specific needs of the tenant. This approach also enables the ability of instantiate VNFs at different locations of the infrastructure, choosing their optimal placement based on parameters such as the requirements of the service traversing the slice or the available resources. This decision process is called orchestration and involves all the VNFs withing the same network slice. The orchestrator is the entity in charge of managing network slices. Hands-on experiments on network slicing are essential to understand its benefits and limits, and to validate the design and deployment choices. While some network slicing prototypes have been built for Radio Access Networks (RANs), leveraging on the wide availability of radio hardware and open-source software, there is no currently open-source suite for end-to-end network slicing available to the research community. Similarly, orchestration mechanisms must be evaluated as well to properly validate theoretical solutions addressing diverse aspects such as resource assignment or service composition. This thesis contributes on the study of the mobile networks evolution regarding its softwarization and cloudification. We identify software patterns for network function virtualization, including the definition of a novel mobile architecture that squeezes the virtualization architecture by splitting functionality in atomic functions. Then, we effectively design, implement and evaluate of an open-source network slicing implementation. Our results show a per-slice customization without paying the price in terms of performance, also providing a slicing implementation to the research community. Moreover, we propose a framework to flexibly re-orchestrate a virtualized network, allowing on-the-fly re-orchestration without disrupting ongoing services. This framework can greatly improve performance under changing conditions. We evaluate the resulting performance in a realistic network slicing setup, showing the feasibility and advantages of flexible re-orchestration. Lastly and following the required re-design of network functions envisioned during the study of the evolution of mobile networks, we present a novel pipeline architecture specifically engineered for 4G/5G Physical Layers virtualized over clouds. The proposed design follows two objectives, resiliency upon unpredictable computing and parallelization to increase efficiency in multi-core clouds. To this end, we employ techniques such as tight deadline control, jitter-absorbing buffers, predictive Hybrid Automatic Repeat Request, and congestion control. Our experimental results show that our cloud-native approach attains > 95% of the theoretical spectrum efficiency in hostile environments where stateof- the-art architectures collapse.This work has been supported by IMDEA Networks InstitutePrograma de Doctorado en Ingeniería Telemática por la Universidad Carlos III de MadridPresidente: Francisco Valera Pintor.- Secretario: Vincenzo Sciancalepore.- Vocal: Xenofon Fouka

Digital signal processing waveform aggregation and its experimental demonstration for next generation mobile fronthaul

L'abstract è presente nell'allegato / the abstract is in the attachmen