A community-scale hybrid energy system integrating biomass for localised solid waste and renewable energy solution: Evaluations in UK and Bulgaria

The file attached to this record is the author's final peer reviewed version. The Publisher's final version can be found by following the DOI link.Growing pace of urban living is expected to simultaneously aggravate both the waste and the energy crises. This study presents feasibility assessment of a community scale hybrid renewable energy system (HRES) utilising biomass to serve the local energy needs while reducing the household solid waste volume. A modelling framework is presented and evaluated for a biomass HRES, comprising of a Wind turbine-PV Array-Biogas generator-Battery system, applied to two European cities - Gateshead (UK) and Sofia (Bulgaria) - accounting for their distinct domestic biowaste profiles, renewable resources and energy practices. Biogas generator is found to make the most substantial share of electricity generation (up to 60–65% of total), hence offering a stable community-scale basal electricity generation potential, alongside reduction in disposal costs of local solid waste. Net present cost for the biomass-integrated HRESs is found within 5% of each other, despite significant differences in the availability of solar and wind resources at the two sites. Based on a survey questionnaire targeting construction companies and energy solution developers, project costs and planning regulatory red tapes were identified as the two common implementation challenges in both the countries, with lack of awareness of HRES as a further limitation in Bulgaria, impeding wider uptake of this initiative

Distributed generation on rural electricity networks - a lines company perspective : a thesis presented in partial fulfillment of the requirements for the degree of Master of Engineering in Energy Management at Massey University

CD held with Reference copyA number of electricity assets used in rural New Zealand yield a very low return on investment. According to the provisions of the Electricity Act 1992, after 01 April 2013, lines companies may terminate supply to any customer to whom they cannot provide electricity lines services profitably. This research was undertaken to assist the policy makers, lines companies, rural investors on the viability of distributed generation in a rural setting from the point of view of the lines company and the investor as well as to provide recommendations to the problem areas. A dynamic distributed generation model was developed to simulate critical distributed generation scenarios relevant to New Zealand, such as diverse metering arrangements, time dependent electricity prices, peak shaving by load control, peak lopping by dispatchable distributed generation and state subsides, which are not addressed in commercial software. Data required to run the model was collected from a small rural North Island sheep and beef farming community situated at the end of a 26km long radial distribution feeder. Additional operational data were also collected from the community on distributed resources such as solar hot water systems. A number of optimum distributed generation combinations involving a range of technologies under different metering arrangements and price signals were identified for the small and the medium investor. The effect of influencing factors, such as state initiatives and technological growth, on the investor and the lines companies were discussed. Recommendations for future implementation in order to integrate distributed generation on to rural networks were also given. Several key research areas were identified and discussed including low cost micro hydro, wind resource assessment, diversification of the use of the induction generators, voltage flicker and dynamic distributed generation techno-economic forecasting tools

Potential for Solar Energy in Food Manufacturing, Distribution and Retail

The overall aim of the study was to assess the potential for increasing the use of solar energy in the food sector. For comparative purposes the study also included an assessment of the benefits that could arise from the use of other renewable energy sources, and the potential for more effective use of energy in food retail and distribution. Specific objectives were to: i) establish the current state of the art in relevant available solar technology; ii) identify the barriers for the adoption of solar technology; iii) assess the potential for solar energy capture; iv) appraise the potential of alternative relevant technologies for providing renewable energy; v) assess the benefits from energy saving technologies; vi) compare the alternative strategies for the next 5-10 years and vii) Consider the merits of specific research programmes on solar energy and energy conservation in the food sector. To obtain the views of the main stakeholders in the relevant food and energy sectors on the opportunities and barriers to the adoption of solar energy and other renewable energy technologies by the food industry, personal interviews and structured questionnaires tailored to the main stakeholders (supermarkets, consultants for supermarket design; energy and equipment suppliers) were used. The main findings from the questionnaires and interviews are: - Key personnel in supermarkets and engineers involved in the design of supermarkets are aware of the potential contribution of renewable energy technologies and other energy conservation measures to energy conservation and environmental impact reduction in the food industry. A number of supermarket chains have implemented such technologies at pilot scale to gain operating experience, and more importantly, for marketing reasons, to gain competitive advantage through a green image. - From installations to date in the UK the most notable are a 600 kW wind turbine at a Sainsbury's distribution centre in East Kilbride and a 60 kWp photovoltaic array at a Tesco store in Swansea. - The main barrier to the application of renewable energy technologies in the food sector is the capital cost. Even though significant progress has been made towards the improvement of the energy conversion efficiencies of photovoltaic technologies (PVs) and reduction in their cost, payback periods are still far too long, for them to become attractive to the food industry. - Wind energy can be more attractive than PVs in areas of high wind speed. Apart from relatively high cost, the main barrier to the wide application of wind turbines for local power generation is planning restrictions. This technology is more attractive for application in food distribution centres that are normally located outside build-up areas where planning restrictions can be less severe than in urban areas. In these applications it is likely that preference will be for large wind turbines of more than 1.0 MW power generation capacity as the cost of generation per unit power reduces with the size of the turbine

3D sustainable renewable micro power station for smart grid industrial applications

The supply of clean energy and its security is becoming a global issue for all countries across the world, due to the limitations of fossil fuels resources usages for energy generations, the relative high dependency on imported fuels, their ever climbing prices and its environmental impacts. Power supply must increase as rapidly as demand to ensure sustained growth. This is the rationale upon which Governments, international organizations, researchers are accelerating investments in expanding the power system, its generation and transmission. This paper presents the preliminary research undertaken to design and develop a 3Dimentional (3D) sustainable renewable micro power station model for smart grid industrial applications. It introduces a solution to challenges in the energy generation sector which do not only refrain only to the safe supply of clean Energy. A major importance for the theoretical study of hybrid systems, based on renewable energy (photovoltaic, wind, hydro system) is the availability of the models that can be utilized to study the behavior of hybrid systems and most important, computer aided design simulation tools. As the available tools are quite limited, this paper would present the most current and up to date model which can be used for the simulation purposes of the 3D sustainable renewable micro power station for smart grid applications as well as for educational purposes

An Economic, Energy, and Environmental Analysis of PV/Micro-CHP Hybrid Systems: A Case Study of a Tertiary Building

Our present standard of living depends strongly on energy sources, with buildings being a primary focus when it comes to reducing energy consumption due to their large contribution, especially in tertiary buildings. The goal of the present study is to evaluate the performance of two different designs of hybrid systems, composed of natural gas engines and photovoltaic panels. This will be done through simulations in TRNSYS, considering a representative office building with various schedules of operation (8, 12, and 24 h), as well as different climates in Spain. The main contributions of this paper are the evaluations of primary energy-consumption, emissions, and economic analyses for each scenario. In addition, a sensitivity analysis is carried out to observe the influence of energy prices, as well as that of the costs of the micro-CHP engines and PV modules. The results show that the scenario with the conventional system and PV modules is the most profitable one currently. However, if electricity prices are increased in the future or natural gas prices are reduced, the scenario with micro-CHP engines and PV modules will become the most profitable option. Energy service engineers, regulators, and manufacturers are the most interested in these results

Energy Production Analysis and Optimization of Mini-Grid in Remote Areas: The Case Study of Habaswein, Kenya

Rural electrification in remote areas of developing countries has several challenges which hinder energy access to the population. For instance, the extension of the national grid to provide electricity in these areas is largely not viable. The Kenyan Government has put a target to achieve universal energy access by the year 2020. To realize this objective, the focus of the program is being shifted to establishing off-grid power stations in rural areas. Among rural areas to be electrified is Habaswein, which is a settlement in Kenya’s northeastern region without connection to the national power grid, and where Kenya Power installed a stand-alone hybrid mini-grid. Based on field observations, power generation data analysis, evaluation of the potential energy resources and simulations, this research intends to evaluate the performance of the Habaswein mini-grid and optimize the existing hybrid generation system to enhance its reliability and reduce the operation costs. The result will be a suggestion of how Kenyan rural areas could be sustainably electrified by using renewable energy based off-grid power stations. It will contribute to bridge the current research gap in this area, and it will be a vital tool to researchers, implementers and the policy makers in energy sector

Innovation in Energy Systems

It has been a little over a century since the inception of interconnected networks and little has changed in the way that they are operated. Demand-supply balance methods, protection schemes, business models for electric power companies, and future development considerations have remained the same until very recently. Distributed generators, storage devices, and electric vehicles have become widespread and disrupted century-old bulk generation - bulk transmission operation. Distribution networks are no longer passive networks and now contribute to power generation. Old billing and energy trading schemes cannot accommodate this change and need revision. Furthermore, bidirectional power flow is an unprecedented phenomenon in distribution networks and traditional protection schemes require a thorough fix for proper operation. This book aims to cover new technologies, methods, and approaches developed to meet the needs of this changing field

A Review of Hybrid Renewable Energy Systems Based on Wind and Solar Energy: Modeling, Design and Optimization

In this chapter, an attempt is made to thoroughly review previous research work conducted on wind energy systems that are hybridized with a PV system. The chapter explores the most technical issues on wind drive hybrid systems and proposes possible solutions that can arise as a result of process integration in off-grid and grid-connected modes. A general introduction to wind energy, including how wind energy can be harvested, as well as recent progress and development of wind energy are discussed. With the special attention given to the issues related to the wind and photovoltaic (Wind-PV) systems. Throughout the chapter emphasis was made on modeling, design, and optimization and sensitivity analysis issues, and control strategies used to minimize risk as well as energy wastage. The reported reviewed results in this chapter will be a valuable researchers and practicing engineers involved in the design and development of wind energy systems

Renewable medium-small projects in Spain: Past and present of microgrid development

This paper reviews the on-going research studies and microgrid pilot projects focusing on the Spanish case because of its renewable energy potential with the objective set on highlights the main investigation drifts in the field such as the used technologies, control methods and operation challenges. That way, several smart grids have been commented and compared, finding that photovoltaic and wind power are the favourites energy generation technologies. Although batteries are the most widespread energy storage systems, green hydrogen has a strong presence, showing up in a third of the Spanish smart grids. Traditional control strategies are being displaced by advanced ones such as MPC or fuzzy logic due to its higher efficiency. The reader will have a clear view of the potential of renewable energy penetration in the form of smart grids in Spain, through the study of the equipment involved in the different facilities contribution and the main control strategies implemented, in a comparative analysis of the key aspect of this emerging technology.Consejería de Conocimiento, Investigación y Universidad - Junta de Andalucía PY18-RE-002