Automation and Control Architecture for Hybrid Pipeline Robots

The aim of this research project, towards the automation of the Hybrid Pipeline Robot (HPR), is the development of a control architecture and strategy, based on reconfiguration of the control strategy for speed-controlled pipeline operations and self-recovering action, while performing energy and time management. The HPR is a turbine powered pipeline device where the flow energy is converted to mechanical energy for traction of the crawler vehicle. Thus, the device is flow dependent, compromising the autonomy, and the range of tasks it can perform. The control strategy proposes pipeline operations supervised by a speed control, while optimizing the energy, solved as a multi-objective optimization problem. The states of robot cruising and self recovering, are controlled by solving a neuro-dynamic programming algorithm for energy and time optimization, The robust operation of the robot includes a self-recovering state either after completion of the mission, or as a result of failures leading to the loss of the robot inside the pipeline, and to guaranteeing the HPR autonomy and operations even under adverse pipeline conditions Two of the proposed models, system identification and tracking system, based on Artificial Neural Networks, have been simulated with trial data. Despite the satisfactory results, it is necessary to measure a full set of robot’s parameters for simulating the complete control strategy. To solve the problem, an instrumentation system, consisting on a set of probes and a signal conditioning board, was designed and developed, customized for the HPR’s mechanical and environmental constraints. As a result, the contribution of this research project to the Hybrid Pipeline Robot is to add the capabilities of energy management, for improving the vehicle autonomy, increasing the distances the device can travel inside the pipelines; the speed control for broadening the range of operations; and the self-recovery capability for improving the reliability of the device in pipeline operations, lowering the risk of potential loss of the robot inside the pipeline, causing the degradation of pipeline performance. All that means the pipeline robot can target new market sectors that before were prohibitive

Advanced Mobile Robotics: Volume 3

Mobile robotics is a challenging field with great potential. It covers disciplines including electrical engineering, mechanical engineering, computer science, cognitive science, and social science. It is essential to the design of automated robots, in combination with artificial intelligence, vision, and sensor technologies. Mobile robots are widely used for surveillance, guidance, transportation and entertainment tasks, as well as medical applications. This Special Issue intends to concentrate on recent developments concerning mobile robots and the research surrounding them to enhance studies on the fundamental problems observed in the robots. Various multidisciplinary approaches and integrative contributions including navigation, learning and adaptation, networked system, biologically inspired robots and cognitive methods are welcome contributions to this Special Issue, both from a research and an application perspective

Benelux meeting on systems and control, 23rd, March 17-19, 2004, Helvoirt, The Netherlands

Book of abstract

High-Speed Obstacle Avoidance at the Dynamic Limits for Autonomous Ground Vehicles

Enabling autonomy of passenger-size and larger vehicles is becoming increasingly important in both military and commercial applications. For large autonomous ground vehicles (AGVs), the vehicle dynamics are critical to consider to ensure vehicle safety during obstacle avoidance maneuvers especially at high speeds. This research is concerned with large-size high-speed AGVs with high center of gravity that operate in unstructured environments. The term `unstructured' in this context denotes that there are no lanes or traffic rules to follow. No map of the environment is available a priori. The environment is perceived through a planar light detection and ranging sensor. The mission of the AGV is to move from its initial position to a given target position safely and as fast as possible. In this dissertation, a model predictive control (MPC)-based obstacle avoidance algorithm is developed to achieve the objectives through an iterative simultaneous optimization of the path and the corresponding control commands. MPC is chosen because it offers a rigorous and systematic approach for taking vehicle dynamics and safety constraints into account. Firstly, this thesis investigates the level of model fidelity needed for an MPC-based obstacle avoidance algorithm to be able to safely and quickly avoid obstacles even when the vehicle is close to its dynamic limits. Five different representations of vehicle dynamics models are considered. It is concluded that the two Degrees-of-Freedom (DoF) representation that accounts for tire nonlinearities and longitudinal load transfer is necessary for the MPC-based obstacle avoidance algorithm to operate the vehicle at its limits within an environment that includes large obstacles. Secondly, existing MPC formulations for passenger vehicles in structured environments do not readily apply to this context. Thus, a novel nonlinear MPC formulation is developed. First, a new cost function formulation is used that aims to find the shortest path to the target position. Second, a region partitioning approach is used in conjunction with a multi-phase optimal control formulation to accommodate the complicated forms of obstacle-free regions from an unstructured environment. Third, the no-wheel-lift-off condition is established offline using a fourteen DoF vehicle dynamics model and is included in the MPC formulation. The formulation can simultaneous optimize both steering angle and reference longitudinal speed commands. Simulation results show that the proposed algorithm is capable of safely exploiting the dynamic limits of the vehicle while navigating the vehicle through sensed obstacles of different size and number. Thirdly, in the algorithm, a model of the vehicle is used explicitly to predict and optimize future actions, but in practice, the model parameter values are not exactly known. It is demonstrated that using nominal parameter values in the algorithm leads to safety issues in about one fourth of the evaluated scenarios with the considered parametric uncertainty distributions. To improve the robustness of the algorithm, a novel double-worst-case formulation is developed. Results from simulations with stratified random scenarios and worst-case scenarios show that the double-worst-case formulation considering both the most likely and less likely worst-case scenarios renders the algorithm robust to all uncertainty realizations tested. The trade-off between the robustness and the task completion performance of the algorithm is also quantified. Finally, in addition to simulation-based validation, preliminary experimental validation is also performed. These results demonstrate that the developed algorithm is promising in terms of its capability of avoiding obstacles. Limitations and potential improvements of the algorithm are discussed.PHDMechanical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/135770/1/ljch_1.pd

Safe Planning And Control Of Autonomous Systems: Robust Predictive Algorithms

Safe autonomous operation of dynamical systems has become one of the most important research problems. Algorithms for planning and control of such systems are now nding place on production vehicles, and are fast becoming ubiquitous on the roads and air-spaces. However most algorithms for such operations, that provide guarantees, either do not scale well or rely on over-simplifying abstractions that make them impractical for real world implementations. On the other hand, the algorithms that are computationally tractable and amenable to implementation generally lack any guarantees on their behavior. In this work, we aim to bridge the gap between provable and scalable planning and control for dynamical systems. The research covered herein can be broadly categorized into: i) multi-agent planning with temporal logic specications, and ii) robust predictive control that takes into account the performance of the perception algorithms used to process information for control. In the rst part, we focus on multi-robot systems with complicated mission requirements, and develop a planning algorithm that can take into account a) spatial, b) temporal and c) reactive mission requirements across multiple robots. The algorithm not only guarantees continuous time satisfaction of the mission requirements, but also that the generated trajectories can be followed by the robot. The other part develops a robust, predictive control algorithm to control the the dynamical system to follow the trajectories generated by the rst part, within some desired bounds. This relies on a contract-based framework wherein the control algorithm controls the dynamical system as well as a resource/quality trade-o in a perception-based state estimation algorithm. We show that this predictive algorithm remains feasible with respect to constraints while following a desired trajectory, and also stabilizes the dynamical system under control. Through simulations, as well as experiments on actual robotic systems, we show that the planning method is computationally ecient as well as scales better than other state-of-the art algorithms that use similar formal specications. We also show that the robust control algorithm provides better control performance, and is also computationally more ecient than similar algorithms that do not leverage the resource/ quality trade-o of the perception-based state estimato