8 research outputs found
Design and Performance Analysis of the Dynamic Reduction of Intrinsic Interference Suppression and BER using QAM-based FBMC for MU-MIMO Communications
The present research work is focused on the study of co-channel interface with its minimization techniques without influencing its performance, in turn, which is desired to achieve the minimized complexity of Quadrature Amplitude Modulation (QAM)-based Filter Bank Multi-Carrier (FBMC) to minimize the interference and increase the spectral features with consideration of intrinsic features extractions for the ML (Maximum Likelihood) synthesis systems. The valid measures are given various concerns under consideration, to start with the consideration of the evaluation of the Cyclic Prefix Orthogonal Frequency Division Multiplexing (CP-OFD performance metrics along with the FBMC/QAM in signal transmission in a dedicated fading channel for the evaluation of the modulation order and BER as a required trade-off for quality assessments. From the results, it can be noted that the proposed FBMC QAM has performed better when compared with conventional FBMC systems. The present research also includes considering and calculating the efficiency of nonlinear channels with the Multi-User Multiple Input Multiple Output (MU-MIMO) and FBMC/QAM techniques. In continuation, the obtained results are dominating significantly to access the possible solution to meet the efficiency of the proposed system. In the next part of the research, it is considered with implementation of the sub-detector during the downlink of the system with the technique of threshold-driven strategy for better accuracy and minimization of the complexity in terms of ML detection in terms of order of its modulation. The calculations of the proposed technique with better BER are done on the recent MATLAB platform with its simulation demonstration for its detailed observation
Design and Evaluation of a Novel Short Prototype Filter for FBMC/OQAM Modulation
International audienceFilter-Bank Multi-Carrier with Offset Quadrature Amplitude Modulation (FBMC/OQAM) is considered by recent research projects as one of the key enablers for the future 5G air interface. It exhibits better spectral shape and improves mobility support compared to Orthogonal Frequency-Division Multiplexing (OFDM) thanks to the use of a time and frequency localized prototype filter. The choice of this filter is crucial for FBMC/OQAM, due to its substantial impact on achieved performance and complexity levels. In the context of 5G, short frame sizes are foreseen in several communication scenarios to reduce system latency, and therefore short filters are preferred. In this context, a novel short filter allowing for near perfect reconstruction and having the same size as one OFDM symbol is proposed. Using Frequency-Spread (FS) implementation for the FBMC/OQAM receiver, analytical analysis and simulation results show that the proposed filter exhibits better robustness to several types of channel impairments when compared to State of-The-Art (SoTA) prototype filters and OFDM modulation. In addition, FS-based hardware architecture of the filtering stage is proposed, showing lower complexity than the classical PolyPhase Network (PPN)-based implementation
A hybrid-structure offset-QAM filter-bank multi-carrier MIMO system
Offset quadrature amplitude modulation (OQAM) filter-bank multi-carrier (FBMC), has great potential for boosting the spectral efficiency (SE) and energy efficiency (EE) of future communication systems. This is due to its superior spectral localization, CP-less transmission and relaxed synchronization requirements. Our research focuses on three main OQAM/FBMC research problems: the computational complexity reduction taking equalization into consideration, its integration with multiple-input multiple-output (MIMO) and its high peak-to-average power ratio (PAPR). OQAM/FBMC systems are mainly implemented either using frequency spreading (FS) or polyphase network (PPN) techniques. The PPN technique is generally less complex, but when using frequency domain equalization (FDE) to equalize multipath channel effects at the receiver, there is a computational complexity overhead when using PPN. A novel hybrid-structure OQAM/FBMC MIMO space-frequency block coding (SFBC) system is proposed, to achieve the lowest possible overall complexity in conjunction with FDE at the receiver in frequency selective Rayleigh fading channel. The Alamouti SFBC block coding is performed on the complex-orthogonal signal before OQAM processing, which resolves the problems of intrinsic interference when integrating OQAM/FBMC with MIMO. In better multipath channel conditions with a line-of-sight (LOS) path, a zero-forcing (ZF) time domain equalization (TDE) is exploited to further reduce the computational complexity with comparable performance bit-error-rate (BER). On the other hand, to tackle the high PAPR problem of the OQAM/FBMC system in the uplink, a novel single carrier (SC)-OQAM/FBMC MIMO system is proposed. The system uses DFT-spreading applied to the OQAM modulated signal, along with interleaved subcarrier mapping to significantly reduce the PAPR and enhance the BER performance over Rayleigh fading channels, with relatively low additional computational complexity compared to the original complexity of the FBMC system and compared to other FBMC PAPR reduction techniques.The proposed hybrid-structure system has shown significant BER performance in frequency-selective Rayleigh fading channels compared to OFDM, with significantly lower OOB emissions in addition to the enhanced SE due to the absence of CP. In mild multipath fading channels with a LOS component, the PPN OQAM/FBMC MIMO using TDE has a comparable BER performance with significantly less computational complexity. As for the uplink, the SC-OQAM/FBMC MIMO system significantly reduces the PAPR and enhances the BER performance, with relatively low additional computational complexity
Recommended from our members
Design and Linearization of Energy Efficiency Power Amplifier in Nonlinear OFDM Transmitter for LTE-5G Applications. Simulation and measurements of energy efficiency power amplifier in the presence of nonlinear OFDM transmitter system and digital predistortion based on Hammerstein-Wiener method
This research work has made an effort to understand a novel line of radio frequency
power amplifiers (RFPAs) that address initiatives for efficiency enhancement and
linearity compensation to harmonize the fifth generation (5G) campaign. The objective
is to enhance the performance of an orthogonal frequency division multiplexing-long
term evolution (OFDM-LTE) transmitter by reducing the nonlinear distortion of the
RFPA.
The first part of this work explores the design and implementation of 15.5 W class AB
RF power amplifier, adopting a balanced technique to stimulate efficiency enhancement
and redeeming exhibition of excessive power in the transmitter. Consequently, this work
goes beyond improving efficiency over a linear RF power amplifier design; in which a
comprehensive investigation on the fundamental and harmonic components of class F
RF power amplifier using a load-pull approach to realise an optimum load impedance
and the matching network is presented. The frequency bandwidth for both amplifiers was
allocated to operate in the 2.620-2.690 GHz of mobile LTE applications.
The second part explores the development of the behavioural model for the class AB
power amplifier. A particular novel, Hammerstein-Wiener based model is proposed to
describe the dynamic nonlinear behaviour of the power amplifier. The RF power amplifier
nonlinear distortion is approximated using a new linear parameter approximation
approach. The first and second-order Hammerstein-Wiener using the Normalised Least
Mean Square Error (NLMSE) algorithm is used with the aim of easing the complexity of
filtering process during linear memory cancellation. Moreover, an enhanced adaptive
Wiener model is proposed to explore the nonlinear memory effect in the system. The
proposed approach is able to balance between convergence speed and high-level
accuracy when compared with behavioural modelling algorithms that are more complex
in computation.
Finally, the adaptive predistorter technique is implemented and verified in the OFDM
transceiver test-bed. The results were compared against the computed one from
MATLAB simulation for OFDM and 5G modulation transmitters. The results have
confirmed the reliability of the model and the effectiveness of the proposed predistorter.FundacĂŁo para a CiĂŞncia e a Tecnologia, Portugal, under
European Union’s Horizon 2020 research and innovation programme ... grant agreement H2020-MSCA-ITN- 2016 SECRET-722424
I also acknowledge the role of the National Space Research and Development Agency (NASRDA)
Sokoto State Government
Petroleum Technology Trust Fund (PTDF