A DRAM/SRAM memory scheme for fast packet buffers

We address the design of high-speed packet buffers for Internet routers. We use a general DRAM/SRAM architecture for which previous proposals can be seen as particular cases. For this architecture, large SRAMs are needed to sustain high line rates and a large number of interfaces. A novel algorithm for DRAM bank allocation is presented that reduces the SRAM size requirements of previously proposed schemes by almost an order of magnitude, without having memory fragmentation problems. A technological evaluation shows that our design can support thousands of queues for line rates up to 160 Gbps.Peer ReviewedPostprint (published version

Design and implementation of high-performance memory systems for future packet buffers

In this paper, we address the design of a future high-speed router that supports line rates as high as OC-3072 (160 Gb/s), around one hundred ports and several service classes. Building such a high-speed router would raise many technological problems, one of them being the packet buffer design, mainly because in router design it is important to provide worst-case bandwidth guarantees and not just average-case optimizations. A previous packet buffer design provides worst-case bandwidth guarantees by using a hybrid SRAM/DRAM approach. Next-generation routers need to support hundreds of interfaces (i.e., ports and service classes). Unfortunately, high bandwidth for hundreds of interfaces requires the previous design to use large SRAMs which become a bandwidth bottleneck. The key observation we make is that the SRAM size is proportional to the DRAM access time but we can reduce the effective DRAM access time by overlapping multiple accesses to different banks, allowing us to reduce the SRAM size. The key challenge is that to keep the worst-case bandwidth guarantees, we need to guarantee that there are no bank conflicts while the accesses are in flight. We guarantee bank conflicts by reordering the DRAM requests using a modern issue-queue-like mechanism. Because our design may lead to fragmentation of memory across packet buffer queues, we propose to share the DRAM space among multiple queues by renaming the queue slots. To the best of our knowledge, the design proposed in this paper is the fastest buffer design using commodity DRAM to be published to date.Peer ReviewedPostprint (published version

Performance evaluation of Fast Ethernet, ATM and Myrinet under PVM

Congestion in network switches can limit the communication traffic between Parallel Virtual Machine (PVM) nodes in a parallel computation. The research introduces a new benchmark to evaluate the performance of PVM in various networking environments. The benchmark is used to achieve a better understanding of performance limitations in parallel computing that are imposed by the choice of the network. The networks considered here are Fast Ethernet, Asynchronous Transfer Mode (ATM) OC-3c (155Mb/s) and Myrinet. Together, they represent an interesting range of alternatives for parallel cluster computing. A characterization of network delays and throughput and a comparison of the expected costs of the three environments are developed to provide a basis for an informed decision on the networking methods and topology for a parallel database that is being considered for FBI\u27s National DNA Indexing System (NDIS)[17]. This network is used for communications among the nodes of the parallel machine; thus the security requirements defined for the FBI\u27s Criminal Justice Information Services Division Wide Area Network (CJIS-WAN) [12] are not a concern

Characterisation & optimisation of computational functional blocks for ATM switches GaAs MESFET technology

Thesis (MESc) -- University of Adelaide, Department of Electrical and Electronic Engineering, 199

Tiled microprocessors

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2007.Includes bibliographical references (p. 251-258).Current-day microprocessors have reached the point of diminishing returns due to inherent scalability limitations. This thesis examines the tiled microprocessor, a class of microprocessor which is physically scalable but inherits many of the desirable properties of conventional microprocessors. Tiled microprocessors are composed of an array of replicated tiles connected by a special class of network, the Scalar Operand Network (SON), which is optimized for low-latency, low-occupancy communication between remote ALUs on different tiles. Tiled microprocessors can be constructed to scale to 100's or 1000's of functional units. This thesis identifies seven key criteria for achieving physical scalability in tiled microprocessors. It employs an archetypal tiled microprocessor to examine the challenges in achieving these criteria and to explore the properties of Scalar Operand Networks. The thesis develops the field of SONs in three major ways: it introduces the 5-tuple performance metric, it describes a complete, high-frequency SON implementation, and it proposes a taxonomy, called AsTrO, for categorizing them.(cont.) To develop these ideas, the thesis details the design, implementation and analysis of a tiled microprocessor prototype, the Raw Microprocessor, which was implemented at MIT in 180 nm technology. Overall, compared to Raw, recent commercial processors with half the transistors required 30x as many lines of code, occupied 100x as many designers, contained 50x as many pre-tapeout bugs, and resulted in 33x as many post-tapeout bugs. At the same time, the Raw microprocessor proves to be more versatile in exploiting ILP, stream, and server-farm workloads with modest to large amounts of parallelism.by Michael Bedford Taylor.Ph.D

Design Approach to Implementation Of Arbitration Algorithm In Shared Bus Architectures (MPSoC)

The multiprocessor SoC designs have more than one processor and huge memory on the same chip. SoC consists of hardware cores and software cores ,multiple processors, embedded DRAM and connectors between cores .A wide range of MPSOC architectures have been developed over the past decade. This paper surveys the history of various On-Chip communication architectures present in the design of MPSoC. This acts as a primary factor of overall performance in complex SoC designs. Some of the various techniques that have driven the design of MpSoC has been discussed. Dynamically configurable communication architectures are found to improve the system performance. Currently On-chip interconnection networks are mostly implemented using shared buses which are the most common medium. The arbitration plays a crucial role in determining performance of bus-based system, as it assigns priorities, with which processor is granted the access to the shared communication resources. In the conventional arbitration algorithms there are some drawbacks such as bus starvation problem and low system performance. The bus should provide each component a flexible and utmost share of on-chip communication bandwidth and should improve the latency in access of the shared bus. The performance of SoC is improved using the probabilistic round robin algorithm with regard to the parameters, latency.Thus in this paper various issues related to bus arbitration related to design of MPSoC is analysed

Design and Performance of Scalable High-Performance Programmable Routers - Doctoral Dissertation, August 2002

The flexibility to adapt to new services and protocols without changes in the underlying hardware is and will increasingly be a key requirement for advanced networks. Introducing a processing component into the data path of routers and implementing packet processing in software provides this ability. In such a programmable router, a powerful processing infrastructure is necessary to achieve to level of performance that is comparable to custom silicon-based routers and to demonstrate the feasibility of this approach. This work aims at the general design of such programmable routers and, specifically, at the design and performance analysis of the processing subsystem. The necessity of programmable routers is motivated, and a router design is proposed. Based on the design, a general performance model is developed and quantitatively evaluated using a new network processor benchmark. Operational challenges, like scheduling of packets to processing engines, are addressed, and novel algorithms are presented. The results of this work give qualitative and quantitative insights into this new domain that combines issues from networking, computer architecture, and system design