Spare capacity allocation using shared backup path protection for dual link failures

This paper extends the spare capacity allocation (SCA) problem from single link failure [1] to dual link failures on mesh-like IP or WDM networks. The SCA problem pre-plans traffic flows with mutually disjoint one working and two backup paths using the shared backup path protection (SBPP) scheme. The aggregated spare provision matrix (SPM) is used to capture the spare capacity sharing for dual link failures. Comparing to a previous work by He and Somani [2], this method has better scalability and flexibility. The SCA problem is formulated in a non-linear integer programming model and partitioned into two sequential linear sub-models: one finds all primary backup paths first, and the other finds all secondary backup paths next. The results on five networks show that the network redundancy using dedicated 1+1+1 is in the range of 313-400%. It drops to 96-181% in 1:1:1 without loss of dual-link resiliency, but with the trade-off of using the complicated share capacity sharing among backup paths. The hybrid 1+1:1 provides intermediate redundancy ratio at 187-310% with a moderate complexity. We also compare the passive/active approaches which consider spare capacity sharing after/during the backup path routing process. The active sharing approaches always achieve lower redundancy values than the passive ones. These reduction percentages are about 12% for 1+1:1 and 25% for 1:1:1 respectively

Dual-failure Survivability for Multi Quality Data using Single p-cycle

Dual-failure scenarios are a real possibility in today’s optical networks and it is becoming more and more important foe carriers and network operators to consider them when designing their networks. p-Cycle is a recent approach in optical network protection. p-Cycle use preconnected cycles of spare capacity to restore affected working traffic. We propose new method and strategies to support multiple qualities of service classes in a static pcycle based network Design, using the same global set of resources as required to operate a network with only a single failure protected service class. A propose new method to provide dual failures survivability using p-cycle. A p-cycle is set up for each link. When link is failure, the system will on-line select the best route of pcycle to react. In single failure or dual failure, data does not divert randomly in route of p-cycle. Data packets are switched based on priority criteria it means that the higher priority packets go through shortest distance route of pcycle and lowest priority data packets go through longest distance route of p-cycle

Survivability and resilience mechanisms in modern optical fibre systems

Optical fibre networks play an increasingly prominent role in communications. As networks grow in size and complexity, the probability and impact of failures increase. In this dissertation, different optical network concepts, survivability and resilience methods are considered. Link and Path failures are discussed and Static Path Protection (SPP), Shared Backup Path Protection (SBPP), as well as Path Restoration (PR) are investigated. A Shared Backup Path Protection model and simulation tool is designed and implemented. This implementation is compared with other studies. Dual-link failures are considered under specific network topologies. Shortest Path algorithms are used to reprovision optimal routes for backup protection. Results and conclusions are discussed in detail, giving valuable insight into resilience methods. Availability and protectability are discussed and evaluated as measures of resilience and network survivability. Results vary between compromising little availability and bringing a significant improvement in availability. It is concluded that the implementation of SBPP is a necessity in highly-meshed networks with high availability needs, but doesn’t necessarily provide the best solution for sparsely-connected networks. The additional cost involved in the implementation needs to be considered carefully.Dissertation (MEng)--University of Pretoria, 2007.Electrical, Electronic and Computer Engineeringunrestricte

Data Driven Network Design for Cloud Services Based on Historic Utilization

In recent years we have seen a shift from traditional networking in enterprises with Data Center centric architectures moving to cloud services. Companies are moving away from private networking technologies like MPLS as they migrate their application workloads to the cloud. With these migrations, network architects must struggle with how to design and build new network infrastructure to support the cloud for all their end users including office workers, remote workers, and home office workers. The main goal for network design is to maximize availability and performance and minimize cost. However, network architects and network engineers tend to over provision networks by sizing the bandwidth for worst case scenarios wasting millions of dollars per year. This thesis will analyze traditional network utilization data from twenty-five of the Fortune 500 companies in the United States and determine the most efficient bandwidth to support cloud services from providers like Amazon, Microsoft, Google, and others. The analysis of real-world data and the resulting proposed scaling factor is an original contribution from this study

Optimal Design Strategies for Survivable Carrier Ethernet Networks

Ethernet technologies have evolved through enormous standardization efforts over the past two decades to achieve carrier-grade functionalities, leading to carrier Ethernet. Carrier Ethernet is expected to dominate next generation backbone networks due to its low-cost and simplicity. Ethernet's ability to provide carrier-grade Layer-2 protection switching with SONET/SDH-like fast restoration time is achieved by a new protection switching protocol, Ethernet Ring Protection (ERP). In this thesis, we address two important design aspects of carrier Ethernet networks, namely, survivable design of ERP-based Ethernet transport networks together with energy efficient network design. For the former, we address the problem of optimal resource allocation while designing logical ERP for deployment and model the combinatorially complex problem of joint Ring Protection Link (RPL) placements and ring hierarchies selection as an optimization problem. We develop several Mixed Integer Linear Programming (MILP) model to solve the problem optimally considering both single link failure and concurrent dual link failure scenarios. We also present a traffic engineering based ERP design approach and develop corresponding MILP design models for configuring either single or multiple logical ERP instances over one underlying physical ring. For the latter, we propose two novel architectures of energy efficient Ethernet switches using passive optical correlators for optical bypassing as well as using energy efficient Ethernet (EEE) ports for traffic aggregation and forwarding. We develop an optimal frame scheduling model for EEE ports to ensure minimal energy consumption by using packet coalescing and efficient scheduling

p-Cycle Based Protection in WDM Mesh Networks

Abstract p-Cycle Based Protection in WDM Mesh Networks Honghui Li, Ph.D. Concordia University, 2012 WDM techniques enable single fiber to carry huge amount of data. However, optical WDM networks are prone to failures, and therefore survivability is a very important requirement in the design of optical networks. In the context of network survivability, p-cycle based schemes attracted extensive research interests as they well balance the recovery speed and the capacity efficiency. Towards the design of p-cycle based survivableWDM mesh networks, some issues still need to be addressed. The conventional p-cycle design models and solution methods suffers from scalability issues. Besides, most studies on the design of p-cycle based schemes only cope with single link failures without any concern about single node failures. Moreover, loop backs may exist in the recovery paths along p-cycles, which lead to unnecessary stretching of the recovery path lengths. This thesis investigates the scalable and efficient design of segment p-cycles against single link failures. The optimization models and their solutions rely on large-scale optimization techniques, namely, Column Generation (CG) modeling and solution, where segment pcycle candidates are dynamically generated during the optimization process. To ensure full node protection in the context of link p-cycles, we propose an efficient protection scheme, called node p-cycles, and develop a scalable optimization design model. It is shown that, depending on the network topology, node p-cycles sometimes outperform path p-cycles in iii terms of capacity efficiency. Also, an enhanced segment p-cycle scheme is proposed, entitled segment Np-cycles, for full link and node protection. Again, the CG-based optimization models are developed for the design of segment Np-cycles. Two objectives are considered, minimizing the spare capacity usage and minimizing the CAPEX cost. It is shown that segment Np-cycles can ensure full node protection with marginal extra cost in comparison with segment p-cycles for link protection. Segment Np-cycles provide faster recovery speed than path p-cycles although they are slightly more costly than path p-cycles. Furthermore, we propose the shortcut p-cycle scheme, i.e., p-cycles free of loop backs for full node and link protection, in addition to shortcuts in the protection paths. A CG-based optimization model for the design of shortcut p-cycles is formulated as well. It is shown that, for full node protection, shortcut p-cycles have advantages over path p-cycles with respect to capacity efficiency and recovery speed. We have studied a whole sequence of protection schemes from link p-cycles to path p-cycles, and concluded that the best compromise is the segment Np-cycle scheme for full node protection with respect to capacity efficiency and recovery time. Therefore, this thesis offers to network operators several interesting alternatives to path p-cycles in the design of survivable WDM mesh networks against any single link/node failures

Survivable mesh-network design & optimization to support multiple QoP service classes

Every second, vast amounts of data are transferred over communication systems around the world, and as a result, the demands on optical infrastructures are extending beyond the traditional, ring-based architecture. The range of content and services available from the Internet is increasing, and network operations are constantly under pressure to expand their optical networks in order to keep pace with the ever increasing demand for higher speed and more reliable links

Optimization of p-cycle protection schemes in optical networks

La survie des réseaux est un domaine d'étude technique très intéressant ainsi qu'une préoccupation critique dans la conception des réseaux. Compte tenu du fait que de plus en plus de données sont transportées à travers des réseaux de communication, une simple panne peut interrompre des millions d'utilisateurs et engendrer des millions de dollars de pertes de revenu. Les techniques de protection des réseaux consistent à fournir une capacité supplémentaire dans un réseau et à réacheminer les flux automatiquement autour de la panne en utilisant cette disponibilité de capacité. Cette thèse porte sur la conception de réseaux optiques intégrant des techniques de survie qui utilisent des schémas de protection basés sur les p-cycles. Plus précisément, les p-cycles de protection par chemin sont exploités dans le contexte de pannes sur les liens. Notre étude se concentre sur la mise en place de structures de protection par p-cycles, et ce, en supposant que les chemins d'opération pour l'ensemble des requêtes sont définis a priori. La majorité des travaux existants utilisent des heuristiques ou des méthodes de résolution ayant de la difficulté à résoudre des instances de grande taille. L'objectif de cette thèse est double. D'une part, nous proposons des modèles et des méthodes de résolution capables d'aborder des problèmes de plus grande taille que ceux déjà présentés dans la littérature. D'autre part, grâce aux nouveaux algorithmes, nous sommes en mesure de produire des solutions optimales ou quasi-optimales. Pour ce faire, nous nous appuyons sur la technique de génération de colonnes, celle-ci étant adéquate pour résoudre des problèmes de programmation linéaire de grande taille. Dans ce projet, la génération de colonnes est utilisée comme une façon intelligente d'énumérer implicitement des cycles prometteurs. Nous proposons d'abord des formulations pour le problème maître et le problème auxiliaire ainsi qu'un premier algorithme de génération de colonnes pour la conception de réseaux protegées par des p-cycles de la protection par chemin. L'algorithme obtient de meilleures solutions, dans un temps raisonnable, que celles obtenues par les méthodes existantes. Par la suite, une formulation plus compacte est proposée pour le problème auxiliaire. De plus, nous présentons une nouvelle méthode de décomposition hiérarchique qui apporte une grande amélioration de l'efficacité globale de l'algorithme. En ce qui concerne les solutions en nombres entiers, nous proposons deux méthodes heurisiques qui arrivent à trouver des bonnes solutions. Nous nous attardons aussi à une comparaison systématique entre les p-cycles et les schémas classiques de protection partagée. Nous effectuons donc une comparaison précise en utilisant des formulations unifiées et basées sur la génération de colonnes pour obtenir des résultats de bonne qualité. Par la suite, nous évaluons empiriquement les versions orientée et non-orientée des p-cycles pour la protection par lien ainsi que pour la protection par chemin, dans des scénarios de trafic asymétrique. Nous montrons quel est le coût de protection additionnel engendré lorsque des systèmes bidirectionnels sont employés dans de tels scénarios. Finalement, nous étudions une formulation de génération de colonnes pour la conception de réseaux avec des p-cycles en présence d'exigences de disponibilité et nous obtenons des premières bornes inférieures pour ce problème.Network survivability is a very interesting area of technical study and a critical concern in network design. As more and more data are carried over communication networks, a single outage can disrupt millions of users and result in millions of dollars of lost revenue. Survivability techniques involve providing some redundant capacity within the network and automatically rerouting traffic around the failure using this redundant capacity. This thesis concerns the design of survivable optical networks using p-cycle based schemes, more particularly, path-protecting p-cycles, in link failure scenarios. Our study focuses on the placement of p-cycle protection structures assuming that the working routes for the set of connection requests are defined a priori. Most existing work carried out on p-cycles concerns heuristic algorithms or methods suffering from critical lack of scalability. Thus, the objective of this thesis is twofold: on the one hand, to propose scalable models and solution methods enabling to approach larger problem instances and on the other hand, to produce optimal or near optimal solutions with mathematically proven optimality gaps. For this, we rely on the column generation technique which is suitable to solve large scale linear programming problems. Here, column generation is used as an intelligent way of implicitly enumerating promising cycles to be part of p-cycle designs. At first, we propose mathematical formulations for the master and the pricing problems as well as the first column generation algorithm for the design of survivable networks based on path-protecting p-cycles. The resulting algorithm obtains better solutions within reasonable running time in comparison with existing methods. Then, a much more compact formulation of the pricing problem is obtained. In addition, we also propose a new hierarchical decomposition method which greatly improves the efficiency of the whole algorithm and allows us to solve larger problem instances. As for integer solutions, two heuristic approaches are proposed to obtain good solutions. Next, we dedicate our attention to a systematic comparison of p-cycles and classical shared protection schemes. We perform an accurate comparison by using a unified column generation framework to find provably good results. Afterwards, our study concerns an empirical evaluation of directed and undirected link- and path-protecting p-cycles under asymmetric traffic scenarios. We show how much additional protection cost results from employing bidirectional systems in such scenarios. Finally, we investigate a column generation formulation for the design of p-cycle networks under availability requirements and obtain the first lower bounds for the problem