Autonomous decision making in a bioinspired adaptive robotic anchoring module

This paper proposes a bioinspired adaptive anchoring module that can be integrated into robots to enhance their mobility and manipulation abilities. The design of the module is inspired by the structure of the mouth in Chilean lamprey (Mordacia lapicida) where a combination of suction and several arrays of teeth with different sizes around the mouth opening is used for catching preys and anchoring onto them. The module can deploy a suitable mode of attachment, via teeth or vacuum suction, to different contact surfaces in response to the textural properties of those surfaces. In order to make a decision on the suitable mode of attachment, an original dataset of 500 images of outdoor and indoor surfaces was used to train a visual surface examination model using YOLOv3; a virtually real-time object detection algorithm. The mean average precision of the trained model was calculated to be 91%. We have conducted a series of pull-out tests to characterize the module’s strength of attachments. The results of the experiments indicate that the anchoring module can withstand an applied detachment force of up to 70N and 30N when attached using teeth and vacuum suction, respectively

Electrostatic Brakes Enable Individual Joint Control of Underactuated, Highly Articulated Robots

Highly articulated organisms serve as blueprints for incredibly dexterous mechanisms, but building similarly capable robotic counterparts has been hindered by the difficulties of developing electromechanical actuators with both the high strength and compactness of biological muscle. We develop a stackable electrostatic brake that has comparable specific tension and weight to that of muscles and integrate it into a robotic joint. Compared to electromechanical motors, our brake-equipped joint is four times lighter and one thousand times more power efficient while exerting similar holding torques. Our joint design enables a ten degree-of-freedom robot equipped with only one motor to manipulate multiple objects simultaneously. We also show that the use of brakes allows a two-fingered robot to perform in-hand re-positioning of an object 45% more quickly and with 53% lower positioning error than without brakes. Relative to fully actuated robots, our findings suggest that robots equipped with such electrostatic brakes will have lower weight, volume, and power consumption yet retain the ability to reach arbitrary joint configurations.Comment: 17 pages, 15 figure

Advanced medical micro-robotics for early diagnosis and therapeutic interventions

Recent technological advances in micro-robotics have demonstrated their immense potential for biomedical applications. Emerging micro-robots have versatile sensing systems, flexible locomotion and dexterous manipulation capabilities that can significantly contribute to the healthcare system. Despite the appreciated and tangible benefits of medical micro-robotics, many challenges still remain. Here, we review the major challenges, current trends and significant achievements for developing versatile and intelligent micro-robotics with a focus on applications in early diagnosis and therapeutic interventions. We also consider some recent emerging micro-robotic technologies that employ synthetic biology to support a new generation of living micro-robots. We expect to inspire future development of micro-robots toward clinical translation by identifying the roadblocks that need to be overcome

Faster R-CNN-based Decision Making in a Novel Adaptive Dual-Mode Robotic Anchoring System

This paper proposes a novel adaptive anchoring module that can be integrated into robots to enhance their mobility and manipulation abilities. The module can deploy a suitable mode of attachment, via spines or vacuum suction, to different contact surfaces in response to the textural properties of the surfaces. In order to make a decision on the suitable mode of attachment, an original dataset of 100 images of outdoor and indoor surfaces was enhanced using a WGAN-GP generating an additional 200 synthetic images. The enhanced dataset was then used to train a visual surface examination model using Faster R-CNN. The addition of synthetic images increased the mean average precision of the Faster R-CNN model from 81.6% to 93.9%. We have also conducted a series of load tests to characterize the module’s strength of attachments. The results of the experiments indicate that the anchoring module can withstand an applied detachment force of around 22N and 20N when attached using spines and vacuum suction on the ideal surfaces, respectively

Development of an expert system for supporting the selection of robot grippers

The aim of this thesis is to lay the basis for the development of an expert system for the selection of robot grippers. This work has started with a review of the literature of the grasping principles, of releasing strategies and of the main problems concerning the automatic assembly or, more in general, the handling. Later, we have studied a set of parameters constituting the input of the expert system, together with a set of rules aimed at choosing the appropriate gripper. The work ends with a series of tests, with a focus on the food industry, reporting the results and discussing the possibility of future developments

Soft manipulators and grippers: A review

Soft robotics is a growing area of research which utilizes the compliance and adaptability of soft structures to develop highly adaptive robotics for soft interactions. One area in which soft robotics has the ability to make significant impact is in the development of soft grippers and manipulators. With an increased requirement for automation, robotics systems are required to perform task in unstructured and not well defined environments; conditions which conventional rigid robotics are not best suited. This requires a paradigm shift in the methods and materials used to develop robots such that they can adapt to and work safely in human environments. One solution to this is soft robotics, which enables soft interactions with the surroundings while maintaining the ability to apply significant force. This review paper assesses the current materials and methods, actuation methods and sensors which are used in the development of soft manipulators. The achievements and shortcomings of recent technology in these key areas are evaluated, and this paper concludes with a discussion on the potential impacts of soft manipulators on industry and society

A microgripper for single cell manipulation

This thesis presents the development of an electrothermally actuated microgripper for the manipulation of cells and other biological particles. The microgripper has been fabricated using a combination of surface and bulk micromachining techniques in a three mask process. All of the fabrication details have been chosen to enable a tri-layer, polymer (SU8) - metal (Au) - polymer (SU8), membrane to be released from the substrate stress free and without the need for sacrificial layers. An actuator design, which completely eliminates the parasitic resistance of the cold arm, is presented. When compared to standard U-shaped actuators, it improves the thermal efficiency threefold. This enables larger displacements at lower voltages and temperatures. The microgripper is demonstrated in three different configurations: normally open mode, normally closed mode, and normally open/closed mode. It has-been modelled using two coupled analytical models - electrothermal and thermomechanical - which have been custom developed for this application. Unlike previously reported models, the electrothermal model presented here includes the heat exchange between hot and cold arms of the actuators that are separated by a small air gap. A detailed electrothermomechanical characterisation of selected devices has permitted the validation of the models (also performed using finite element analysis) and the assessment of device performance. The device testing includes electrical, deflection, and temperature measurements using infrared (IR) thermography, its use in polymeric actuators reported here for the first time. Successful manipulation experiments have been conducted in both air and liquid environments. Manipulation of live cells (mice oocytes) in a standard biomanipulation station has validated the microgripper as a complementary and unique tool for the single cell experiments that are to be conducted by future generations of biologists in the areas of human reproduction and stem cell research