Survey of traffic control schemes and error control schemes for ATM networks

Among the techniques proposed for B-ISDN transfer mode, ATM concept is considered to be the most promising transfer technique because of its flexibility and efficiency. This paper surveys and reviews a number of topics related to ATM networks. Those topics cover congestion control, provision of multiple classes of traffic, and error control. Due to the nature of ATM networks, those issues are far more challenging than in conventional networks. Sorne of the more promising solutions to those issues are surveyed, and the corresponding results on performance are summarized. Future research problems in ATM protocol aspect are also presented

Investigation of delay jitter of heterogeneous traffic in broadband networks

Scope and Methodology of Study: A critical challenge for both wired and wireless networking vendors and carrier companies is to be able to accurately estimate the quality of service (QoS) that will be provided based on the network architecture, router/switch topology, and protocol applied. As a result, this thesis focuses on the theoretical analysis of QoS parameters in term of inter-arrival jitter in differentiated services networks by deploying analytic/mathematical modeling technique and queueing theory, where the analytic model is expressed in terms of a set of equations that can be solved to yield the desired delay jitter parameter. In wireless networks with homogeneous traffic, the effects on the delay jitter in reference to the priority control scheme of the ARQ traffic for the two cases of: 1) the ARQ traffic has a priority over the original transmission traffic; and 2) the ARQ traffic has no priority over the original transmission traffic are evaluated. In wired broadband networks with heterogeneous traffic, the jitter analysis is conducted and the algorithm to control its effect is also developed.Findings and Conclusions: First, the results show that high priority packets always maintain the minimum inter-arrival jitter, which will not be affected even in heavy load situation. Second, the Gaussian traffic modeling is applied using the MVA approach to conduct the queue length analysis, and then the jitter analysis in heterogeneous broadband networks is investigated. While for wireless networks with homogeneous traffic, binomial distribution is used to conduct the queue length analysis, which is sufficient and relatively easy compared to heterogeneous traffic. Third, develop a service discipline called the tagged stream adaptive distortion-reducing peak output-rate enforcing to control and avoid the delay jitter increases without bound in heterogeneous broadband networks. Finally, through the analysis provided, the differential services, was proved not only viable, but also effective to control delay jitter. The analytic models that serve as guidelines to assist network system designers in controlling the QoS requested by customer in term of delay jitter

The NxD-BMAP/G/1 queueing model : queue contents and delay analysis

We consider a single-server discrete-time queueing system with N sources, where each source is modelled as a correlated Markovian customer arrival process, and the customer service times are generally distributed. We focus on the analysis of the number of customers in the queue, the amount of work in the queue, and the customer delay. For each of these quantities, we will derive an expression for their steady-state probability generating function, and from these results, we derive closed-form expressions for key performance measures such as their mean value, variance, and tail distribution. A lot of emphasis is put on finding closed-form expressions for these quantities that reduce all numerical calculations to an absolute minimum

Some aspects of traffic control and performance evaluation of ATM networks

The emerging high-speed Asynchronous Transfer Mode (ATM) networks are expected to integrate through statistical multiplexing large numbers of traffic sources having a broad range of statistical characteristics and different Quality of Service (QOS) requirements. To achieve high utilisation of network resources while maintaining the QOS, efficient traffic management strategies have to be developed. This thesis considers the problem of traffic control for ATM networks. The thesis studies the application of neural networks to various ATM traffic control issues such as feedback congestion control, traffic characterization, bandwidth estimation, and Call Admission Control (CAC). A novel adaptive congestion control approach based on a neural network that uses reinforcement learning is developed. It is shown that the neural controller is very effective in providing general QOS control. A Finite Impulse Response (FIR) neural network is proposed to adaptively predict the traffic arrival process by learning the relationship between the past and future traffic variations. On the basis of this prediction, a feedback flow control scheme at input access nodes of the network is presented. Simulation results demonstrate significant performance improvement over conventional control mechanisms. In addition, an accurate yet computationally efficient approach to effective bandwidth estimation for multiplexed connections is investigated. In this method, a feed forward neural network is employed to model the nonlinear relationship between the effective bandwidth and the traffic situations and a QOS measure. Applications of this approach to admission control, bandwidth allocation and dynamic routing are also discussed. A detailed investigation has indicated that CAC schemes based on effective bandwidth approximation can be very conservative and prevent optimal use of network resources. A modified effective bandwidth CAC approach is therefore proposed to overcome the drawback of conventional methods. Considering statistical multiplexing between traffic sources, we directly calculate the effective bandwidth of the aggregate traffic which is modelled by a two-state Markov modulated Poisson process via matching four important statistics. We use the theory of large deviations to provide a unified description of effective bandwidths for various traffic sources and the associated ATM multiplexer queueing performance approximations, illustrating their strengths and limitations. In addition, a more accurate estimation method for ATM QOS parameters based on the Bahadur-Rao theorem is proposed, which is a refinement of the original effective bandwidth approximation and can lead to higher link utilisation

Performance analysis of error recovery and congestion control in high-speed networks

In the past few years, Broadband Integrated Services Digital Network (B-ISDN) has received increasing attention as a communication architecture capable of supporting multimedia applications. Among the techniques proposed to implement B-ISDN, Asynchronous Transfer Mode (ATM) is considered to be the most promising transfer technique because of its efficiency and flexibility.In ATM networks, the performance bottleneck of the network, which was once the channel transmission speed, is shifted to the processing speed at the network switching nodes and the propagation delay of the channel. This shift is because the high-speed channel increases the ratio of processing time to packet transmission time and also the ratio of propagation delay to packet transmission time. The increased processing overhead makes it difficult to implement hop-by-hop schemes, which may impose prohibitably high processing at each switching node. The increased propagation delay overhead makes traffic control in ATM a challenge since a large number of packets can be in transit between two ATM switching nodes. Because of these fundamental changes, control schemes developed for traditional networks may not perform efficiently, and thus, new network architectures (congestion control schemes, error control schemes, etc.) are required in ATM networks.In this dissertation, we first present an extensive survey of various traffic control schemes and network protocols for ATM networks. In this survey, possible traffic control schemes are examined, and problems of those schemes and their possible solutions are presented. Next, we investigate two key research issues in ATM networks (and other types of high-speed networks): the effects of protocol-processing overhead and the efficiency of traffic control schemes.We first investigate the effects of protocol-processing overhead on the performance of error recovery schemes. Specifically, we investigate the performance trade-offs between link-by-link and edge-to-edge error recovery schemes. Our results show that for a network with high-speed/low-error-rate channels, an edge-to-edge scheme gives a smaller delay than a link-by-link scheme. We then investigate the effectiveness of a priority packet discarding scheme, a congestion control mechanism suitable for high-speed networks. We derive loss probabilities for each stream and investigate the impact of burstiness of traffic streams on the performance of individual streams

Simulation of ATM multiplexer for bursty sources

Asynchronous transfer mode ( ATM ) is a promising multiplexing and switching technique for implementing an integrated access as well as transport network and has been adopted by CCITT as a basis for the future broadband integrated services digital network ( BISDN ). The ATM technique allows digital communication of any type to share common transmission links and switching devices on a statistical multiplexing basis. Information is transmitted in the form of constant length cells. In an ATM network, the major parameters to cause ATM network performance deterioration are the cell loss and the cell delay at the buffer queue in the ATM multiplexer. Therefore, the performance parameters of an ATM multiplexer are specifically focused on the cell loss probability, the cell delay, and the distribution of queueing length at buffer m this study. The performance of an ATM multiplexer is studied, whose input consists of the superposition of homogeneous bursty ( ON/OFF ) sources, 1e , all the superposed sources are characterized by the bursty sources of the same parameter values. The cell loss probability and the distribution of queuing length at buffer under different offered load and buffer size conditions are evaluated. An ATM multiplexer with three priority classes is simulated using the priority assignment control method of [15]. Under the priority assignment period P and the priority assignment ratio WD in this method have been defined, the relationship between the traffic balance of classes and buffer size of each is studied. The cell loss probability and delay time of each class ( same sources and different sources between classes ) are evaluated. The results are useful to design a economic and effective ATM multiplexer

From burstiness characterisation to traffic control strategy : a unified approach to integrated broadbank networks

The major challenge in the design of an integrated network is the integration and support of a wide variety of applications. To provide the requested performance guarantees, a traffic control strategy has to allocate network resources according to the characteristics of input traffic. Specifically, the definition of traffic characterisation is significant in network conception. In this thesis, a traffic stream is characterised based on a virtual queue principle. This approach provides the necessary link between network resources allocation and traffic control. It is difficult to guarantee performance without prior knowledge of the worst behaviour in statistical multiplexing. Accordingly, we investigate the worst case scenarios in a statistical multiplexer. We evaluate the upper bounds on the probabilities of buffer overflow in a multiplexer, and data loss of an input stream. It is found that in networks without traffic control, simply controlling the utilisation of a multiplexer does not improve the ability to guarantee performance. Instead, the availability of buffer capacity and the degree of correlation among the input traffic dominate the effect on the performance of loss. The leaky bucket mechanism has been proposed to prevent ATM networks from performance degradation due to congestion. We study the leaky bucket mechanism as a regulation element that protects an input stream. We evaluate the optimal parameter settings and analyse the worst case performance. To investigate its effectiveness, we analyse the delay performance of a leaky bucket regulated multiplexer. Numerical results show that the leaky bucket mechanism can provide well-behaved traffic with guaranteed delay bound in the presence of misbehaving traffic. Using the leaky bucket mechanism, a general strategy based on burstiness characterisation, called the LB-Dynamic policy, is developed for packet scheduling. This traffic control strategy is closely related to the allocation of both bandwidth and buffer in each switching node. In addition, the LB-Dynamic policy monitors the allocated network resources and guarantees the network performance of each established connection, irrespective of the traffic intensity and arrival patterns of incoming packets. Simulation studies demonstrate that the LB-Dynamic policy is able to provide the requested service quality for heterogeneous traffic in integrated broadband networks

Buffer management and cell switching management in wireless packet communications

The buffer management and the cell switching (e.g., packet handoff) management using buffer management scheme are studied in Wireless Packet Communications. First, a throughput improvement method for multi-class services is proposed in Wireless Packet System. Efficient traffic management schemes should be developed to provide seamless access to the wireless network. Specially, it is proposed to regulate the buffer by the Selective- Delay Push-In (SDPI) scheme, which is applicable to scheduling delay-tolerant non-real time traffic and delay-sensitive real time traffic. Simulation results show that the performance observed by real time traffics are improved as compared to existing buffer priority scheme in term of packet loss probability. Second, the performance of the proposed SDPI scheme is analyzed in a single CBR server. The arrival process is derived from the superposition of two types of traffics, each in turn results from the superposition of homogeneous ON-OFF sources that can be approximated by means of a two-state Markov Modulated Poisson Process (MMPP). The buffer mechanism enables the ATM layer to adapt the quality of the cell transfer to the QoS requirements and to improve the utilization of network resources. This is achieved by selective-delaying and pushing-in cells according to the class they belong to. Analytical expressions for various performance parameters and numerical results are obtained. Simulation results in term of cell loss probability conform with our numerical analysis. Finally, a novel cell-switching scheme based on TDMA protocol is proposed to support QoS guarantee for the downlink. The new packets and handoff packets for each type of traffic are defined and a new cutoff prioritization scheme is devised at the buffer of the base station. A procedure to find the optimal thresholds satisfying the QoS requirements is presented. Using the ON-OFF approximation for aggregate traffic, the packet loss probability and the average packet delay are computed. The performance of the proposed scheme is evaluated by simulation and numerical analysis in terms of packet loss probability and average packet delay

Application of learning algorithms to traffic management in integrated services networks.

SIGLEAvailable from British Library Document Supply Centre-DSC:DXN027131 / BLDSC - British Library Document Supply CentreGBUnited Kingdo