Fast track to renewables: Low emission electricity for south west Australia by 2030

Could renewable energy be implemented rapidly and on a large scale to supply the demand of stationary electrical grid systems? This thesis takes a step towards answering this question by simulating 100% renewable energy scenarios for the South-West Interconnected System (SWIS), which supplies electricity to most of the population and industry in the southwest of Western Australia (SWWA). The SWIS is remarkable in that it is both isolated from other grids and currently has little available hydro-power. Solar and wind energy were chosen as the energy sources to be simulated because they are commercially mature technologies, already have a presence in the SWIS, are widely available in many other parts of the world, yet they are geographically and temporally variable. To simulate the operation of rooftop solar PV and large scale solar and wind power plants, heuristic models were built to generate synthetic hourly values of solar and wind energy resources anywhere within the SWWA. An integrated simulation of the SWIS grid was built using simple models of population increase, energy efficiency, distributed battery storage and seasonal power to gas storage. The construction schedules required to build a 100% renewable system for the SWIS by the year 2030 were found to be achievable for scenarios with a mix of solar PV, solar thermal and wind. If solar PV, wind and battery storage capacity could maintain exponential growth, then the required growth rates are less than current global growth rates. Energy efficiency would need to improve at a greater rate, though still moderate, than the current global improvement rate. However, the more that energy efficiency is improved, the lower the total demand, and the easier the task becomes for the other technologies. The findings of this thesis have positive implications for world-wide rapid transformation to low emission electricity generation

Secure and Sustainable Energy System

This special issue aims to contribute to the climate actions which called for the need to address Greenhouse Gas (GHG) emissions, keeping global warming to well below 2°C through various means, including accelerating renewables, clean fuels, and clean technologies into the entire energy system. As long as fossil fuels (coal, gas and oil) are still used in the foreseeable future, it is vital to ensure that these fossil fuels are used cleanly through abated technologies. Financing the clean and energy transition technologies is vital to ensure the smooth transition towards net zero emission by 2050 or beyond. The lack of long‐term financing, the low rate of return, the existence of various risks, and the lack of capacity of market players are major challenges to developing sustainable energy systems.This special collected 17 high-quality empirical studies that assess the challenges for developing secure and sustainable energy systems and provide practical policy recommendations. The editors of this special issue wish to thank the Economic Research Institute for ASEAN and East Asia (ERIA) for funding several papers that were published in this special issue

Solar thermal collectors for use in hybrid solar-biomass power plants in India

This thesis examined solar thermal collectors for use in alternative hybrid solar-biomass power plant applications in Gujarat, India. Following a preliminary review, the cost-effective selection and design of the solar thermal field were identified as critical factors underlying the success of hybrid plants. Consequently, the existing solar thermal technologies were reviewed and ranked for use in India by means of a multi-criteria decision-making method, the Analytical Hierarchy Process (AHP). Informed by the outcome of the AHP, the thesis went on to pursue the Linear Fresnel Reflector (LFR), the design of which was optimised with the help of ray-tracing. To further enhance collector performance, LFR concepts incorporating novel mirror spacing and drive mechanisms were evaluated. Subsequently, a new variant, termed the Elevation Linear Fresnel Reflector (ELFR) was designed, constructed and tested at Aston University, UK, therefore allowing theoretical models for the performance of a solar thermal field to be verified. Based on the resulting characteristics of the LFR, and data gathered for the other hybrid system components, models of hybrid LFR- and ELFR-biomass power plants were developed and analysed in TRNSYS®. The techno-economic and environmental consequences of varying the size of the solar field in relation to the total plant capacity were modelled for a series of case studies to evaluate different applications: tri-generation (electricity, ice and heat), electricity-only generation, and process heat. The case studies also encompassed varying site locations, capacities, operational conditions and financial situations. In the case of a hybrid tri-generation plant in Gujarat, it was recommended to use an LFR solar thermal field of 14,000 m2 aperture with a 3 tonne biomass boiler, generating 815 MWh per annum of electricity for nearby villages and 12,450 tonnes of ice per annum for local fisheries and food industries. However, at the expense of a 0.3 ¢/kWh increase in levelised energy costs, the ELFR increased saving of biomass (100 t/a) and land (9 ha/a). For solar thermal applications in areas with high land cost, the ELFR reduced levelised energy costs. It was determined that off-grid hybrid plants for tri-generation were the most feasible application in India. Whereas biomass-only plants were found to be more economically viable, it was concluded that hybrid systems will soon become cost competitive and can considerably improve current energy security and biomass supply chain issues in India

Solar thermal collectors for use in hybrid solar-biomass power plants in India

This thesis examined solar thermal collectors for use in alternative hybrid solar-biomass power plant applications in Gujarat, India. Following a preliminary review, the cost-effective selection and design of the solar thermal field were identified as critical factors underlying the success of hybrid plants. Consequently, the existing solar thermal technologies were reviewed and ranked for use in India by means of a multi-criteria decision-making method, the Analytical Hierarchy Process (AHP). Informed by the outcome of the AHP, the thesis went on to pursue the Linear Fresnel Reflector (LFR), the design of which was optimised with the help of ray-tracing. To further enhance collector performance, LFR concepts incorporating novel mirror spacing and drive mechanisms were evaluated. Subsequently, a new variant, termed the Elevation Linear Fresnel Reflector (ELFR) was designed, constructed and tested at Aston University, UK, therefore allowing theoretical models for the performance of a solar thermal field to be verified. Based on the resulting characteristics of the LFR, and data gathered for the other hybrid system components, models of hybrid LFR- and ELFR-biomass power plants were developed and analysed in TRNSYS®. The techno-economic and environmental consequences of varying the size of the solar field in relation to the total plant capacity were modelled for a series of case studies to evaluate different applications: tri-generation (electricity, ice and heat), electricity-only generation, and process heat. The case studies also encompassed varying site locations, capacities, operational conditions and financial situations. In the case of a hybrid tri-generation plant in Gujarat, it was recommended to use an LFR solar thermal field of 14,000 m2 aperture with a 3 tonne biomass boiler, generating 815 MWh per annum of electricity for nearby villages and 12,450 tonnes of ice per annum for local fisheries and food industries. However, at the expense of a 0.3 ¢/kWh increase in levelised energy costs, the ELFR increased saving of biomass (100 t/a) and land (9 ha/a). For solar thermal applications in areas with high land cost, the ELFR reduced levelised energy costs. It was determined that off-grid hybrid plants for tri-generation were the most feasible application in India. Whereas biomass-only plants were found to be more economically viable, it was concluded that hybrid systems will soon become cost competitive and can considerably improve current energy security and biomass supply chain issues in India.EThOS - Electronic Theses Online ServiceGBUnited Kingdo

Microstructure and Corrosion Behavior of Advanced Alloys

In many industrial applications, metallic materials are exposed to harsh operating conditions. Due to a combination of chemical and thermal stresses, the constructional and functional materials are degraded, and their utility properties are lost. These undesirable events are of a physicochemical nature and are commonly known as ‘corrosion’. In this Special Issue Book, 3 reviews and 18 original research papers focused on the complex relationships between the microstructure, phase constitution, and corrosion behavior of metallic materials are collected. Both high temperature and low temperature corrosion studies are included as they investigate the physicochemical processes at the material interfaces. Furthermore, possibilities for increasing the corrosion resistance of metallic materials are studied by means of surface modification and application of protective layers. This Special Issue Book, Microstructure and Corrosion Behavior of Advanced Alloys, displays the diversity and complexity of modern corrosion research. It is hoped that it will become a valuable source of reference for corrosion scientists