Five decades of hierarchical modulation and its benefits in relay-aided networking

Hierarchical modulation (HM), which is also known as layered modulation, has been widely adopted across the telecommunication industry. Its strict backward compatibility with single-layer modems and its low complexity facilitate the seamless upgrading of wireless communication services. The specific features of HM may be conveniently exploited for improving the throughput/information-rate of the system without requiring any extra bandwidth, while its complexity may even be lower than that of the equivalent system relying on conventional modulation schemes. As a recent research trend, the potential employment of HM in the context of cooperative communications has also attracted substantial research interests. Motivated by the lower complexity and higher flexibility of HM, we provide a comprehensive survey and conclude with a range of promising future research directions. Our contribution is the conception of a new cooperative communication paradigm relying on turbo trellis-coded modulation-aided twin-layer HM-16QAM and the analytical performance investigation of a four-node cooperative communication network employing a novel opportunistic routing algorithm. The specific performance characteristics evaluated include the distribution of delay, the outage probability, the transmit power of each node, the average packet power consumption, and the system throughput. The simulation results have demonstrated that when transmitting the packets formed by layered modulated symbol streams, our opportunistic routing algorithm is capable of reducing the transmit power required for each node in the network compared with that of the system using the traditional opportunistic routing algorithm. We have also illustrated that the minimum packet power consumption of our system using our opportunistic routing algorithm is also lower than that of the system using the traditional opportunistic routing algorithm

Resource Allocation in Relay Networks

Demand for high data rates is increasing rapidly, due to the rapid rise of mobile data traffic volume. In order to meet the demands, the future generation of wireless communication systems has to support higher data rates and quality of service. The inherent unreliable and unpredictable nature of wireless medium provides a challenge for increasing the data rate. Cooperative communications, is a prominent technique to combat the detrimental fading effect in wireless communications. Adding relay nodes to the network, and creating s virtual multiple-input multiple-output (MIMO) antenna array is proven to be an efficient method to mitigate the multipath fading and expand the network coverage. Therefore, cooperative relaying is considered as a fundamental element in the Long Term Evolution (LTE)-Advanced standard. In this thesis, we address the problem of resource allocation in cooperative networks. We provide a detailed review on the resource allocation problem. We look at the joint subcarrier-relay assignment and power allocation. The objective of this optimization problem is to allocate the resources fairly, so even the cell-edge users with weakest communication links receive a fair share of resources. We propose a simple and practical algorithm to find the optimal solution. We assess the performance of the proposed algorithm by providing simulations. Furthermore, we investigate the optimality and complexity of the proposed algorithm. Due to the layered architecture of the wireless networks, to achieve the optimal performance it is necessary that the design of the algorithms be based on the underlying physical and link layers. For a cooperative network with correlated channels, we propose a cross-layer algorithm for relay selection, based on both the physical and link-layer characteristics, in order to maximize the linklayer throughput. The performance of the proposed algorithm is studied in different network models. Furthermore, we investigate the optimum number of relays required for cooperation in order to achieve maximum throughput. Buffering has proven to improve the performance of the cooperative network. In light of this, we study the performance of buffer-aided relay selection. In order to move one step closer to the practical applications, we consider a system with coded transmissions. We study three different coding schemes: convolutional code, Turbo code, and distributed Turbo code (DTC). For each scheme, the performance of the system is simulated and assessed analytically. We derive a closed form expression of the average throughput. Using the analysis results, we investigate the diversity gain of the system in asymptotic conditions. Further, we investigate the average transmission delay for different schemes

Hierarchical colour-shift-keying aided layered video streaming for the visible light downlink

Colour-shift keying (CSK) constitutes an important modulation scheme conceived for the visible light communications (VLC). The signal constellation of CSK relies on three different-color light sources invoked for information transmission. The CSK constellation has been optimized for minimizing the bit error rate, but no effort has been invested in investigating the feasibility of CSK aided unequal error protection (UEP) schemes conceived for video sources. Hence, in this treatise, we conceive a hierarchical CSK (HCSK) modulation scheme based on the traditional CSK, which is capable of generating interdependent layers of signals having different error probability, which can be readily reconfigured by changing its parameters. Furthermore, we conceived an HCSK design example for transmitting scalable video sources with the aid of a recursive systematic convolutional (RSC) code. An optimization method is conceived for enhancing the UEP and for improving the quality of the received video. Our simulation results show that the proposed optimized-UEP 16-HCSK-RSC system outperforms the traditional equal error protection scheme by ~ 1.7 dB of optical SNR at a peak signal-to-noise ratio of 37 dB, while optical SNR savings of up to 6.5 dB are attained at a lower PSNR of 36 dB

Decode-and-forward cooperation-aided triple-layer turbo-trellis-coded hierarchical modulation

Hierarchical Modulation (HM) is widely employed across the telecommunication industry. The potential application of the coded HM scheme in cooperative communications has drawn a lot of interests. In this paper, a twin-relay aided triplelayer cooperative communication system is proposed. The system amalgamates rate-1/2 TTCM, triple-layer HM-64QAM and twinlayer SPM-16QAM schemes in the context of cooperative communications. We have optimized the entire system based on the HM ratio pair (R1;R2), the Superposition Modulation (SPM) weighting pair (; ) and the positions of the two relays. The simulation results show that our optimized system is capable of reliably transmitting a triple-layer HM-64QAM signal with the aid of two time slots at an average Signal-to-Noise-Ratio of 6:94 dB per time slot

Proceedings of the Fifth International Mobile Satellite Conference 1997

Satellite-based mobile communications systems provide voice and data communications to users over a vast geographic area. The users may communicate via mobile or hand-held terminals, which may also provide access to terrestrial communications services. While previous International Mobile Satellite Conferences have concentrated on technical advances and the increasing worldwide commercial activities, this conference focuses on the next generation of mobile satellite services. The approximately 80 papers included here cover sessions in the following areas: networking and protocols; code division multiple access technologies; demand, economics and technology issues; current and planned systems; propagation; terminal technology; modulation and coding advances; spacecraft technology; advanced systems; and applications and experiments

Combined Time, Frecuency and Space Diversity in Multimedia Mobile Broadcasting Systems

El uso combinado de diversidad en el dominio temporal, frecuencial y espacial constituye una valiosa herramienta para mejorar la recepción de servicios de difusión móviles. Gracias a la mejora conseguida por las técnicas de diversidad es posible extender la cobertura de los servicios móviles además de reducir la infraestructura de red. La presente tesis investiga el uso de técnicas de diversidad para la provisión de servicios móviles en la familia europea de sistemas de difusión terrestres estandarizada por el prpoyecto DVB (Digital Video Broadcasting). Esto incluye la primera y segunda generación de sistemas DVB-T (Terrestrial), DVB-NGH (Handheld), y DVB-T2 (Terrestrial 2nd generation), así como el sistema de siguiente generación DVB-NGH. No obstante, el estudio llevado a cabo en la tesis es genérico y puede aplicarse a futuras evoluciones de estándares como el japonés ISDB-T o el americano ATSC. Las investigaciones realizadas dentro del contexto de DVB-T, DVB-H y DVBT2 tienen como objetivo la transmisión simultánea de servicios fijos y móviles en redes terrestres. Esta Convergencia puede facilitar la introducción de servicios móviles de TB debido a la reutilización de espectro, contenido e infraestructura. De acuerdo a los resultados, la incorporación de entrelazado temporal en la capa física para diversidad temporal, y de single-input multiple-output (SIMO) para diversidad espacial, son esenciales para el rendimiento de sistemas móviles de difusión. A pesar de que las técnicas upper later FEC (UL-FEC) pueden propocionar diversidad temporal en sistemas de primera generación como DVB-T y DVB-H, requieren la transmisión de paridad adicional y no son útiles para la recepción estática. El análisis en t�ñerminos de link budjget revela que las técnicas de diversidad noson suficientes para facilitar la provision de servicios móviles en redes DVB-T y DVB-T2 planificadas para recepción fija. Sin embargo, el uso de diversidad en redes planificadas para recepción portableGozálvez Serrano, D. (2012). Combined Time, Frecuency and Space Diversity in Multimedia Mobile Broadcasting Systems [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/16273Palanci

Multi-core architectures with coarse-grained dynamically reconfigurable processors for broadband wireless access technologies

Broadband Wireless Access technologies have significant market potential, especially the WiMAX protocol which can deliver data rates of tens of Mbps. Strong demand for high performance WiMAX solutions is forcing designers to seek help from multi-core processors that offer competitive advantages in terms of all performance metrics, such as speed, power and area. Through the provision of a degree of flexibility similar to that of a DSP and performance and power consumption advantages approaching that of an ASIC, coarse-grained dynamically reconfigurable processors are proving to be strong candidates for processing cores used in future high performance multi-core processor systems. This thesis investigates multi-core architectures with a newly emerging dynamically reconfigurable processor – RICA, targeting WiMAX physical layer applications. A novel master-slave multi-core architecture is proposed, using RICA processing cores. A SystemC based simulator, called MRPSIM, is devised to model this multi-core architecture. This simulator provides fast simulation speed and timing accuracy, offers flexible architectural options to configure the multi-core architecture, and enables the analysis and investigation of multi-core architectures. Meanwhile a profiling-driven mapping methodology is developed to partition the WiMAX application into multiple tasks as well as schedule and map these tasks onto the multi-core architecture, aiming to reduce the overall system execution time. Both the MRPSIM simulator and the mapping methodology are seamlessly integrated with the existing RICA tool flow. Based on the proposed master-slave multi-core architecture, a series of diverse homogeneous and heterogeneous multi-core solutions are designed for different fixed WiMAX physical layer profiles. Implemented in ANSI C and executed on the MRPSIM simulator, these multi-core solutions contain different numbers of cores, combine various memory architectures and task partitioning schemes, and deliver high throughputs at relatively low area costs. Meanwhile a design space exploration methodology is developed to search the design space for multi-core systems to find suitable solutions under certain system constraints. Finally, laying a foundation for future multithreading exploration on the proposed multi-core architecture, this thesis investigates the porting of a real-time operating system – Micro C/OS-II to a single RICA processor. A multitasking version of WiMAX is implemented on a single RICA processor with the operating system support