Decision Directed Channel Estimation Aided OFDM Employing Sample-Spaced and Fractionally-Spaced CIR Estimators

Abstract—In this letter we characterize the substantial difference between two channel estimation approaches, namely the sample-spaced (SS) and the fractionally-spaced (FS) channel impulse response (CIR) estimators. The achievable performance of decision-directed channel estimation (DDCE) methods employing both the SS- and the FS-CIR estimators is analyzed in the context of an OFDM system. The performance of the two estimation methods is compared and it is shown that the DDCE scheme employing the Projection Approximation Subspace Tracking (PAST)-aided FS-CIR estimator outperforms its SS-CIR estimator-based counterpart. Index Terms—Multiuser OFDM, decision directed channel estimation, impulse response estimation SDMA

Smart Antenna-Aided Multicarrier Transceivers for Mobile Communications

In spite of an immense interest from both the academic and the industrial communities, a practical multipleinput multiple-output (MIMO) transceiver architecture, capable of approaching channel capacity boundaries in realistic channel conditions remains largely an open problem. Consequently, in this treatise I derive an advanced iterative, so called turbo multi-antenna-multi-carrier (MAMC) receiver architecture. Following the philosophy of turbo processing, our turbo spacial division multiplexed (SDM)-orthogonal frequency division multiplexed (OFDM) receiver comprises a succession of soft-input-soft-output detection modules, which iteratively exchange soft bit-related information and thus facilitate a substantial improvement of the overall system performance. In this treatise, I explore two major aspects of the turbo wireless mobile receiver design. Firstly, I consider the problem of soft-decision-feedback aided acquisition of the propagation conditions experienced by the transmitted signal and secondly, I explore the issue of the soft-input-soft-output detection of the spatially-multiplexed information-carrying signals

Channel estimation for SISO and MIMO OFDM communications systems.

Thesis (Ph.D.)-University of KwaZulu-Natal, Durban, 2010.Telecommunications in the current information age is increasingly relying on the wireless link. This is because wireless communication has made possible a variety of services ranging from voice to data and now to multimedia. Consequently, demand for new wireless capacity is growing rapidly at a very alarming rate. In a bid to cope with challenges of increasing demand for higher data rate, better quality of service, and higher network capacity, there is a migration from Single Input Single Output (SISO) antenna technology to a more promising Multiple Input Multiple Output (MIMO) antenna technology. On the other hand, Orthogonal Frequency Division Multiplexing (OFDM) technique has emerged as a very popular multi-carrier modulation technique to combat the problems associated with physical properties of the wireless channels such as multipath fading, dispersion, and interference. The combination of MIMO technology with OFDM techniques, known as MIMO-OFDM Systems, is considered as a promising solution to enhance the data rate of future broadband wireless communication Systems. This thesis addresses a major area of challenge to both SISO-OFDM and MIMO-OFDM Systems; estimation of accurate channel state information (CSI) in order to make possible coherent detection of the transmitted signal at the receiver end of the system. Hence, the first novel contribution of this thesis is the development of a low complexity adaptive algorithm that is robust against both slow and fast fading channel scenarios, in comparison with other algorithms employed in literature, to implement soft iterative channel estimator for turbo equalizer-based receiver for single antenna communication Systems. Subsequently, a Fast Data Projection Method (FDPM) subspace tracking algorithm is adapted to derive Channel Impulse Response Estimator for implementation of Decision Directed Channel Estimation (DDCE) for Single Input Single Output - Orthogonal Frequency Division Multiplexing (SISO-OFDM) Systems. This is implemented in the context of a more realistic Fractionally Spaced-Channel Impulse Response (FS-CIR) channel model, as against the channel characterized by a Sample Spaced-Channel Impulse Response (SS)-CIR widely assumed by other authors. In addition, a fast convergence Variable Step Size Normalized Least Mean Square (VSSNLMS)-based predictor, with low computational complexity in comparison with others in literatures, is derived for the implementation of the CIR predictor module of the DDCE scheme. A novel iterative receiver structure for the FDPM-based Decision Directed Channel Estimation scheme is also designed for SISO-OFDM Systems. The iterative idea is based on Turbo iterative principle. It is shown that improvement in the performance can be achieved with the iterative DDCE scheme for OFDM system in comparison with the non iterative scheme. Lastly, an iterative receiver structure for FDPM-based DDCE scheme earlier designed for SISO OFDM is extended to MIMO-OFDM Systems. In addition, Variable Step Size Normalized Least Mean Square (VSSNLMS)-based channel transfer function estimator is derived in the context of MIMO Channel for the implementation of the CTF estimator module of the iterative Decision Directed Channel Estimation scheme for MIMO-OFDM Systems in place of linear minimum mean square error (MMSE) criterion. The VSSNLMS-based channel transfer function estimator is found to show improved MSE performance of about -4 MSE (dB) at SNR of 5dB in comparison with linear MMSE-based channel transfer function estimator

Implementation of a testbed for MISO OFDM communication systems.

Thesis (M.Sc.Eng.)-University of KwaZulu-Natal, Durban, 2012.The thesis presents an implementation of a multiple input single output orthogonal frequency division multiplex (MISO OFDM) communication system testbed. The project was developed in order to evaluate whether the channel estimation algorithms developed by Dr Oyerinde [1] could be implemented in a real time communication system that uses today’s technology. This implementation based validation would help determine the practicality of algorithms and methods that promise better performance for communication systems from a simulation point of view. The benefits of using multiple orthogonal carriers are discussed as well as how an OFDM system works. The benefits of using multiple antennas at the transmitter, as opposed to using just one, are also discussed. The Alamouti scheme which allows space diversity to be achieved without the cost of having a lower data rate is presented. Modules common to all communication systems, such as those dedicated to synchronization, channel estimation, symbol detection and channel coding, are discussed. The different methods of synchronization for OFDM communication systems are presented and compared. The channel estimation algorithm developed by Dr Oyerinde is presented and is adopted for an indoor channel. Most of the system blocks and parameters used in the testbed are the same as those used in [1] in order to easily compare the results obtained by simulation and those obtained by implementation. The system bandwidth required for the project was too high for the processor chosen for the testbed. A qualitative evaluation of the practicality of Dr Oyerinde’s channel estimation algorithms was performed instead. From this evaluation it was derived that Dr Oyerinde’s non-iterative decision directed channel estimation algorithm was more suitable for real time non-iterative decision directed channel estimation communication systems than for iterative versions. Apart from processing demands that couldn’t be met, the other aspects of the project were implemented successfully

Compensation of fibre impairments in coherent optical systems

Tese de mestrado integrado. Engenharia Electrotécnica e de Computadores. Faculdade de Engenharia. Universidade do Porto. 201

Advanced receiver structures for mobile MIMO multicarrier communication systems

Beyond third generation (3G) and fourth generation (4G) wireless communication systems are targeting far higher data rates, spectral efficiency and mobility requirements than existing 3G networks. By using multiple antennas at the transmitter and the receiver, multiple-input multiple-output (MIMO) technology allows improving both the spectral efficiency (bits/s/Hz), the coverage, and link reliability of the system. Multicarrier modulation such as orthogonal frequency division multiplexing (OFDM) is a powerful technique to handle impairments specific to the wireless radio channel. The combination of multicarrier modulation together with MIMO signaling provides a feasible physical layer technology for future beyond 3G and fourth generation communication systems. The theoretical benefits of MIMO and multicarrier modulation may not be fully achieved because the wireless transmission channels are time and frequency selective. Also, high data rates call for a large bandwidth and high carrier frequencies. As a result, an important Doppler spread is likely to be experienced, leading to variations of the channel over very short period of time. At the same time, transceiver front-end imperfections, mobility and rich scattering environments cause frequency synchronization errors. Unlike their single-carrier counterparts, multi-carrier transmissions are extremely sensitive to carrier frequency offsets (CFO). Therefore, reliable channel estimation and frequency synchronization are necessary to obtain the benefits of MIMO OFDM in mobile systems. These two topics are the main research problems in this thesis. An algorithm for the joint estimation and tracking of channel and CFO parameters in MIMO OFDM is developed in this thesis. A specific state-space model is introduced for MIMO OFDM systems impaired by multiple carrier frequency offsets under time-frequency selective fading. In MIMO systems, multiple frequency offsets are justified by mobility, rich scattering environment and large angle spread, as well as potentially separate radio frequency - intermediate frequency chains. An extended Kalman filter stage tracks channel and CFO parameters. Tracking takes place in time domain, which ensures reduced computational complexity, robustness to estimation errors as well as low estimation variance in comparison to frequency domain processing. The thesis also addresses the problem of blind carrier frequency synchronization in OFDM. Blind techniques exploit statistical or structural properties of the OFDM modulation. Two novel approaches are proposed for blind fine CFO estimation. The first one aims at restoring the orthogonality of the OFDM transmission by exploiting the properties of the received signal covariance matrix. The second approach is a subspace algorithm exploiting the correlation of the channel frequency response among the subcarriers. Both methods achieve reliable estimation of the CFO regardless of multipath fading. The subspace algorithm needs extremely small sample support, which is a key feature in the face of time-selective channels. Finally, the Cramér-Rao (CRB) bound is established for the problem in order to assess the large sample performance of the proposed algorithms.reviewe

On the Use of a Two-Dimensional Cyclic Prefix in OTFS Modulation and Its Implications

In this manuscript we investigate the implications of adopting a double cyclic prefix in the orthogonal time-frequency space modulation. Our study first focuses on the analysis of the modulated signal and on the development of a useful model for the received signal in the presence of a doubly selective fading channel. On the one hand, our mathematical results allow us to accurately assess the impact of pulse shaping on the structure of the transmitted waveform and on its power spectral density, and to develop some simple rules for allocating multiple pilot symbols within each orthogonal time-frequency space symbol. On the other hand, they are exploited to develop a novel algorithm for pilot-aided channel estimation, whose output provides a detailed representation of the communication channel; for this reason, it can be used for sensing at the transmit side in integrated sensing and communication applications, or for channel equalization at the receive side in digital communications. Our numerical results evidence that our channel estimation & equalization algorithm outperforms the other related techniques available in the technical literature at the price of a limited increase in computational complexity

Hybrid solutions to instantaneous MIMO blind separation and decoding: narrowband, QAM and square cases

Future wireless communication systems are desired to support high data rates and high quality transmission when considering the growing multimedia applications. Increasing the channel throughput leads to the multiple input and multiple output and blind equalization techniques in recent years. Thereby blind MIMO equalization has attracted a great interest.Both system performance and computational complexities play important roles in real time communications. Reducing the computational load and providing accurate performances are the main challenges in present systems. In this thesis, a hybrid method which can provide an affordable complexity with good performance for Blind Equalization in large constellation MIMO systems is proposed first. Saving computational cost happens both in the signal sep- aration part and in signal detection part. First, based on Quadrature amplitude modulation signal characteristics, an efficient and simple nonlinear function for the Independent Compo- nent Analysis is introduced. Second, using the idea of the sphere decoding, we choose the soft information of channels in a sphere, and overcome the so- called curse of dimensionality of the Expectation Maximization (EM) algorithm and enhance the final results simultaneously. Mathematically, we demonstrate in the digital communication cases, the EM algorithm shows Newton -like convergence.Despite the widespread use of forward -error coding (FEC), most multiple input multiple output (MIMO) blind channel estimation techniques ignore its presence, and instead make the sim- plifying assumption that the transmitted symbols are uncoded. However, FEC induces code structure in the transmitted sequence that can be exploited to improve blind MIMO channel estimates. In final part of this work, we exploit the iterative channel estimation and decoding performance for blind MIMO equalization. Experiments show the improvements achievable by exploiting the existence of coding structures and that it can access the performance of a BCJR equalizer with perfect channel information in a reasonable SNR range. All results are confirmed experimentally for the example of blind equalization in block fading MIMO systems

Frequency synchronization in multiuser OFDM-IDMA systems.

Thesis (M.Sc.Eng.)-University of KwaZulu-Natal, Durban, 2013.Various multiuser schemes have been proposed to efficiently utilize the available bandwidth while ensuring an acceptable service delivery and flexibility. The multicarrier CDMA became an attractive solution to the major challenges confronting the wireless communication system. However, the scheme is plagued with multiple access interference (MAI), which causes conspicuous performance deterioration at the receiver. A low-complexity multiuser scheme called the Interleave Division Multiple Access (IDMA) was proposed recently as a capable solution to the drawback in the multicarrier CDMA scheme. A combined scheme of OFDM-IDMA was later introduced to enhance the performance of the earlier proposed IDMA scheme. The multicarrier IDMA scheme therefore combats inter-symbol interference (ISI) and MAI effectively over multipath with low complexity while ensuring a better cellular performance, high diversity order, and spectral efficiency. Major studies on the OFDM-IDMA scheme emphasis only on the implementation of the scheme in a perfect scenario, where there are no synchronization errors in the system. Like other multicarrier schemes, the OFDM-IDMA scheme however suffers from carrier frequency offset (CFO) errors, which is inherent in the OFDM technique. This research work therefore examines, and analyzes the effect of synchronization errors on the performance of the new OFDM-based hybrid scheme called the OFDM-IDMA. The design of the OFDM-IDMA system developed is such that the cyclic prefix duration of the OFDM component is longer than the maximum channel delay spread of the multipath channel model used. This effectively eliminates ISI as well as timing offsets in the system. Since much work has not been done hitherto to address the deteriorating effect of synchronization errors on the OFDM-IDMA system, this research work therefore focuses on the more challenging issue of carrier frequency synchronization at the uplink. A linear MMSE-based synchronization algorithm is proposed and implemented. The proposed algorithm is a non-data aided method that focuses on the mitigation of the ICI induced by the residual CFOs due to concurrent users in the multicarrier system. However, to obtain a better and improved system performance, the Kernel Least Mean Square (KLMS) algorithm and the normalized KLMS are proposed, implemented, and effectively adapted to combat the degrading influence of carrier frequency offset errors on the OFDM-IDMA scheme. The KLMS synchronization algorithm, which involves the execution of the conventional Least Mean Square (LMS) algorithm in the kernel space, utilizes the modulated input signal in the implementation of the kernel function, thereby enhancing the efficacy of the algorithm and the overall output of the multicarrier system. The algorithms are applied in a Rayleigh fading multipath channel with varying mobile speed to verify their effectiveness and to clearly demonstrate their influence on the performance of the system in a practical scenario. Also, the implemented algorithms are compared to ascertain which of these algorithms offers a better and more efficient system performance. Computer simulations of the bit error performance of the algorithms are presented to verify their respective influence on the overall output of the multicarrier system. Simulation results of the algorithms in both slow fading and fast fading multipath scenarios are documented as well