Recent Advances in Acquiring Channel State Information in Cellular MIMO Systems

In cellular multi-user multiple input multiple output (MU-MIMO) systems the quality of the available channel state information (CSI) has a large impact on the system performance. Specifically, reliable CSI at the transmitter is required to determine the appropriate modulation and coding scheme, transmit power and the precoder vector, while CSI at the receiver is needed to decode the received data symbols. Therefore, cellular MUMIMO systems employ predefined pilot sequences and configure associated time, frequency, code and power resources to facilitate the acquisition of high quality CSI for data transmission and reception. Although the trade-off between the resources used user data transmission has been known for long, the near-optimal configuration of the vailable system resources for pilot and data transmission is a topic of current research efforts. Indeed, since the fifth generation of cellular systems utilizes heterogeneous networks in which base stations are equipped with a large number of transmit and receive antennas, the appropriate configuration of pilot-data resources becomes a critical design aspect. In this article, we review recent advances in system design approaches that are designed for the acquisition of CSI and discuss some of the recent results that help to dimension the pilot and data resources specifically in cellular MU-MIMO systems

Beyond Massive MIMO : Trade-offs and Opportunities with Large Multi-Antenna Systems

After the commercial emergence of 5G, the research community is already putting its focus on proposing innovative solutions to enable the upcoming 6G. One important lesson put forth by 5G research was that scaling up the conventional multiple-input-multiple-output (MIMO) technology by increasing the number of antennas could be extremely beneficial for effectively multiplexing data streams in the spatial domain. This idea was embodied in massive MIMO, which constitutes one of the major technical advancements included in 5G. Consequently, 6G research efforts have been largely directed towards studying ways to further scale up wireless systems, as can be seen in some of the proposed 6G enabling technologies like large intelligent surface (LIS), cell-free massive MIMO, or even reconfigurable intelligent surface (RIS). This thesis studies the possibilities offered by some of these technologies, as well as the trade-offs that may naturally arise when scaling up such wireless systems.An important part of this thesis deals with decentralized solutions for base station (BS) technologies including a large number of antennas. Already in the initial massive MIMO prototypes, the increased number of BS antennas led to scalability issues due to the high interconnection bandwidths required to send the received signals---as well as the channel state information (CSI)---to a central processing unit (CPU) in charge of the data processing. These issues can only be exacerbated if we consider novel system proposals like LIS, where the number of BS antennas may be increased by an order of magnitude with respect to massive MIMO, or cell-free massive MIMO, where the BS antennas may be located far from each other. We provide a number of decentralized schemes to process the received data while restricting the information that has to be shared with a CPU. We also provide a framework to study architectures with an arbitrary level of decentralization, showing that there exists a direct trade-off between the interconnection bandwidth to a CPU and the complexity of the decentralized processing required for fixed user rates.Another part of this thesis studies RIS-based solutions to enhance the multiplexing performance of wireless communication systems. RIS constitutes one of the most attractive 6G enabling technologies since it provides a cost- and energy-efficient solution to improve the wireless propagation links by generating favorable reflections. We extend the concept of RIS by considering reconfigurable surfaces (RSs) with different processing capabilities, and we show how these surfaces may be employed for achieving perfect spatial multiplexing at reduced processing complexity in general multi-antenna communication settings. We also show that these surfaces can exploit the available degrees of freedom---e.g., due to excess of BS antennas---to embed their own data into the enhanced channel

A Survey of Physical Layer Security Techniques for 5G Wireless Networks and Challenges Ahead

Physical layer security which safeguards data confidentiality based on the information-theoretic approaches has received significant research interest recently. The key idea behind physical layer security is to utilize the intrinsic randomness of the transmission channel to guarantee the security in physical layer. The evolution towards 5G wireless communications poses new challenges for physical layer security research. This paper provides a latest survey of the physical layer security research on various promising 5G technologies, including physical layer security coding, massive multiple-input multiple-output, millimeter wave communications, heterogeneous networks, non-orthogonal multiple access, full duplex technology, etc. Technical challenges which remain unresolved at the time of writing are summarized and the future trends of physical layer security in 5G and beyond are discussed.Comment: To appear in IEEE Journal on Selected Areas in Communication

Systems with Massive Number of Antennas: Distributed Approaches

As 5G is entering maturity, the research interest has shifted towards 6G, and specially the new use cases that the future telecommunication infrastructure needs to support. These new use cases encompass much higher requirements, specifically: higher communication data-rates, larger number of users, higher accuracy in localization, possibility to wirelessly charge devices, among others.The radio access network (RAN) has already gone through an evolution on the path towards 5G. One of the main changes was a large increment of the number of antennas in the base-station. Some of them may even reach 100 elements, in what is commonly referred as Massive MIMO. New proposals for 6G RAN point in the direction of continuing this path of increasing the number of antennas, and locate them throughout a certain area of service. Different technologies have been proposed in this direction, such as: cell-free Massive MIMO, distributed MIMO, and large intelligent surface (LIS). In this thesis we focus on LIS, whose conducted theoretical studies promise the fulfillment of the aforementioned requirements.While the theoretical capabilities of LIS have been conveniently analyzed, little has been done in terms of implementing this type of systems. When the number of antennas grow to hundreds or thousands, there are numerous challenges that need to be solved for a successful implementation. The most critical challenges are the interconnection data-rate and the computational complexity.In the present thesis we introduce the implementation challenges, and show that centralized processing architectures are no longer adequate for this type of systems. We also present different distributed processing architectures and show the benefits of this type of schemes. This work aims at giving a system-design guideline that helps the system designer to make the right decisions when designing these type of systems. For that, we provide algorithms, performance analysis and comparisons, including first order evaluation of the interconnection data-rate, processing latency, memory and energy consumption. These numbers are based on models and available data in the literature. Exact values depend on the selected technology, and will be accurately determined after building and testing these type of systems.The thesis concentrates mostly on the topic of communication, with additional exploration of other areas, such as localization. In case of localization, we benefit from the high spatial resolution of a very-large array that provides very rich channel state information (CSI). A CSI-based fingerprinting via neural network technique is selected for this case with promising results. As the communication and localization services are based on the acquisition of CSI, we foresee a common system architecture capable of supporting both cases. Further work in this direction is recommended, with the possibility of including other applications such as sensing.The obtained results indicate that the implementation of these very-large array systems is feasible, but the challenges are numerous. The proposed solutions provide encouraging results that need to be verified with hardware implementations and real measurements

Coordinated Beamforming with Altruistic Precoding and User Selection for MU-MIMO System

Other cell interference (OCI) degrades the achievable capacity of downlink multiuser multiple-input multiple-output (MU-MIMO) systems seriously. Among OCI mitigation schemes, methods that sacrifice ξ degrees of freedom to nullify the OCI have been proven to be helpful to improve the cell edge throughput. However, since interference nulling schemes can only improve the signal to interference plus noise ratio (SINR) of ξ users, they are not optimal in terms of average cell throughput, especially for low to medium OCI levels. We explore the question whether it is better to improve the SINR of every user in other cells rather than benefit ξ users. An altruistic precoding method to minimize the sum of generated interference for all of the other cell users is proposed with ξ degrees of freedom being sacrificed. With the altruistic precoding method, we deduce the lower bound on the capacity and solve the multicell user selection problem with a local optimal solution in which only eigenvalues of interfering channels are needed to be shared. Simulation results demonstrate that the proposed method outperforms the existing algorithms at any OCI level. Furthermore, we also analyze the best choice of degrees of freedom used to mitigate OCI through simulation

D3.2 First performance results for multi -node/multi -antenna transmission technologies

This deliverable describes the current results of the multi-node/multi-antenna technologies investigated within METIS and analyses the interactions within and outside Work Package 3. Furthermore, it identifies the most promising technologies based on the current state of obtained results. This document provides a brief overview of the results in its first part. The second part, namely the Appendix, further details the results, describes the simulation alignment efforts conducted in the Work Package and the interaction of the Test Cases. The results described here show that the investigations conducted in Work Package 3 are maturing resulting in valuable innovative solutions for future 5G systems.Fantini. R.; Santos, A.; De Carvalho, E.; Rajatheva, N.; Popovski, P.; Baracca, P.; Aziz, D.... (2014). D3.2 First performance results for multi -node/multi -antenna transmission technologies. http://hdl.handle.net/10251/7675