1,591 research outputs found
DC link voltage control during sudden load changes in AC microgrids
Parallel inverters in AC microgrids can achieve accurate power sharing using droop control. However, different grid line impedances will result in different transient power and thus different energy being delivered or absorbed by the inverters during sudden load changes. This might lead the DC link voltage to rise beyond the trip limit causing the inverter to shut down, which reduces the reliability of the whole microgrid. This paper investigates the effect of the mismatch in line impedances on the stability of the DC link voltage during a sudden load changes and proposes a scheme to control the DC link voltage during disturbances. Simulation and experimental results are presented to verify the efficacy of the proposed controller
Hybrid Generators-based AC Microgrid Performance Assessment in Island Mode
Achieving an accurate steady-state averaged active power sharing between parallel inverters in islanded AC microgrids could be realized by a traditional droop control. For identical inverters having the same droop gains, it is assumed that the transient average power responses will be similar, and no circulating current will flow between the units. However, different line impedances could influence the instantaneous power significantly and thus circulating power flows among the inverters particularly during sudden disturbances such as load changes. This power, if absorbed by an inverter, will lead the DC link voltage to rise abruptly and trip the inverter, thus, degrading the performance of the whole microgrid. The problem becomes worse when hybrid generators are serving as unidirectional power source. This paper assesses the performance of hybrid generators within an islanded microgrid against the mismatch in line impedances. Two schemes to stabilize the microgrid are proposed. In addition, a participation factor analysis is developed to select the most effective controller scheme to bound the DC link voltage and minimize the circulating power. Simulation and experimental results are presented to verify the analysis and the capability of the proposed controller
Coordinated Control of Energy Storage in Networked Microgrids under Unpredicted Load Demands
In this paper a nonlinear control design for power balancing in networked
microgrids using energy storage devices is presented. Each microgrid is
considered to be interfaced to the distribution feeder though a solid-state
transformer (SST). The internal duty cycle based controllers of each SST
ensures stable regulation of power commands during normal operation. But
problem arises when a sudden change in load or generation occurs in any
microgrid in a completely unpredicted way in between the time instants at which
the SSTs receive their power setpoints. In such a case, the energy storage unit
in that microgrid must produce or absorb the deficit power. The challenge lies
in designing a suitable regulator for this purpose owing to the nonlinearity of
the battery model and its coupling with the nonlinear SST dynamics. We design
an input-output linearization based controller, and show that it guarantees
closed-loop stability via a cascade connection with the SST model. The design
is also extended to the case when multiple SSTs must coordinate their
individual storage controllers to assist a given SST whose storage capacity is
insufficient to serve the unpredicted load. The design is verified using the
IEEE 34-bus distribution system with nine SST-driven microgrids.Comment: 8 pages, 10 figure
Transition from Islanded to grid-connected mode of microgrids with voltage-based droop control
Microgrids are able to provide a coordinated integration of the increasing share of distributed generation (DG) units in the network. The primary control of the DG units is generally performed by droop-based control algorithms that avoid communication. The voltage-based droop (VBD) control is developed for islanded low-voltage microgrids with a high share of renewable energy sources. With VBD control, both dispatchable and less-dispatchable units will contribute in the power sharing and balancing. The priority for power changes is automatically set dependent on the terminal voltages. In this way, the renewables change their output power in more extreme voltage conditions compared to the dispatchable units, hence, only when necessary for the reliability of the network. This facilitates the integration of renewable units and improves the reliability of the network. This paper focusses on modifying the VBD control strategy to enable a smooth transition between the islanded and the grid-connected mode of the microgrid. The VBD control can operate in both modes. Therefore, for islanding, no specific measures are required. To reconnect the microgrid to the utility network, the modified VBD control synchronizes the voltage of a specified DG unit with the utility voltage. It is shown that this synchronization procedure significantly limits the switching transient and enables a smooth mode transfer
Voltage stability of power systems with renewable-energy inverter-based generators: A review
© 2021 by the authors. The main purpose of developing microgrids (MGs) is to facilitate the integration of renewable energy sources (RESs) into the power grid. RESs are normally connected to the grid via power electronic inverters. As various types of RESs are increasingly being connected to the electrical power grid, power systems of the near future will have more inverter-based generators (IBGs) instead of synchronous machines. Since IBGs have significant differences in their characteristics compared to synchronous generators (SGs), particularly concerning their inertia and capability to provide reactive power, their impacts on the system dynamics are different compared to SGs. In particular, system stability analysis will require new approaches. As such, research is currently being conducted on the stability of power systems with the inclusion of IBGs. This review article is intended to be a preface to the Special Issue on Voltage Stability of Microgrids in Power Systems. It presents a comprehensive review of the literature on voltage stability of power systems with a relatively high percentage of IBGs in the generation mix of the system. As the research is developing rapidly in this field, it is understood that by the time that this article is published, and further in the future, there will be many more new developments in this area. Certainly, other articles in this special issue will highlight some other important aspects of the voltage stability of microgrids
Diseño y control de una microred en dc de baja tensión con recursos distribuidos de energía
In this document a brief review of the DC microgrids generalities with emphasis in the control architecture is done. A novel hybrid-control architecture to take care of the inner, primary and secondary levels of DC microgrids monitoring, is simulated under different conditions. In the inner control architecture an Modified Exact Feedback Linearization with integral action approach, is proposed for control current or voltage in a Buck converter, designed to be part of the DC microgrid.
The controllers are tested in simulation using Matlab-Simulink . Results are compared with classic PID controllers and evaluated under two different mathematical
tools (Mean Square Error, Integral Time Absolute Error) in order to prove their effectiveness. The evaluated data show that the proposed approach outperform the
classical methods..
Recommended from our members
Design and operation of modular microgrids
textMicrogrids are being considered as a solution for implementing more reliable and flexible power systems compared to the conventional power grid. Various factors, such as low system inertia, might make the task of microgrid design and operation to be nontrivial. In order to address the needs for operational flexibility in a simpler manner, this dissertation discusses modular approaches for design and operation of microgrids. This research investigates Active Power Distribution Nodes (APDNs), which is a storage integrated power electronic interface, as an interface block for designing modular microgrids. To perform both voltage/current regulation and energy management of APDNs, two hierarchical control frameworks for APDNs are proposed. The first framework focuses on maintaining the charge level of the embedded energy storage at the highest available level to increase system availability, and the second framework focuses on autonomous power sharing, and storage management. The detailed design process, control performance and stability characteristics are also studied. The performance is also verified by both simulation and experiments. The control approaches enable application of APDNs as a power router realizing distributed energy management. The decentralized configuration also increases modularity and availability of power networks by preventing single point-of-failures. The advantages of using APDNs as a connection interface inside a power network are discussed from an availability perspective by performing a comparison using Markov-based availability models. Furthermore, the operation of APDNs as power buffers is explored and the application of APDNs enabling modular implementation of microgrids is also studied. APDNs enable the system expansion process—i.e. connecting new loads to the original system—to be performed without modifying the configuration of the original system. The analysis results show that a fault-tolerant microgrid with an open architecture can be realized in a modular manner with APDNs. APDNs also enable simplified selectivity planning for system protection. The effect of modular operation on microgrids is also studied by using an inertia index. The index not only provides insights on how system performance is affected by modular operation of modular microgrids, but is also used to develop a simpler operation strategy to mitigate the effect of plug and play operations.Electrical and Computer Engineerin
- …