18,075 research outputs found
Vehicle lead-acid battery state-of-charge meter
We describe a state-of-charge, or âresidual-capacityâ meter for lead-acid batteries that intelligently synthesizes coulometric and terminal-voltage methods in a new algorithm to provide reliable, continuous readout of remaining capacity. Novel electronic circuit design eliminates the need to install a shunt in the vehicle. The meter learns the characteristics of a battery to which it is attached, removing the need for setup, customisation, programming or calibration at time of installation or battery replacement. The meter can thus be installed by unqualified personnel. Initial measurements suggest the design to be robust and accurate
Electric vehicle battery model identification and state of charge estimation in real world driving cycles
This paper describes a study demonstrating a new method of state-of-charge (SoC) estimation for batteries in real-world electric vehicle applications. This method combines realtime model identification with an adaptive neuro-fuzzy inference system (ANFIS). In the study, investigations were carried down on a small-scale battery pack. An equivalent circuit network model of the pack was developed and validated using pulse-discharge experiments. The pack was then subjected to demands representing realistic WLTP and UDDS driving cycles obtained from a model of a representative electric vehicle, scaled match the size of the battery pack. A fast system identification technique was then used to estimate battery parameter values. One of these, open circuit voltage, was selected as suitable for SoC estimation, and this was used as the input to an ANFIS system which estimated the SoC. The results were verified by comparison to a theoretical Coulomb-counting method, and the new method was judged to be effective. The case study used a small 7.2 V NiMH battery pack, but the method described is applicable to packs of any size or chemistry
Observer techniques for estimating the state-of-charge and state-of-health of VRLABs for hybrid electric vehicles
The paper describes the application of observer-based state-estimation techniques for the real-time prediction of state-of-charge (SoC) and state-of-health (SoH) of lead-acid cells. Specifically, an approach based on the well-known Kalman filter, is employed, to estimate SoC, and the subsequent use of the EKF to accommodate model non-linearities to predict battery SoH. The underlying dynamic behaviour of each cell is based on a generic Randles' equivalent circuit comprising of two-capacitors (bulk and surface) and three resistors, (terminal, transfer and self-discharging). The presented techniques are shown to correct for offset, drift and long-term state divergence-an unfortunate feature of employing stand-alone models and more traditional coulomb-counting techniques. Measurements using real-time road data are used to compare the performance of conventional integration-based methods for estimating SoC, with those predicted from the presented state estimation schemes. Results show that the proposed methodologies are superior with SoC being estimated to be within 1% of measured. Moreover, by accounting for the nonlinearities present within the dynamic cell model, the application of an EKF is shown to provide verifiable indications of SoH of the cell pack
Nonlinear observers for predicting state-of-charge and state-of-health of lead-acid batteries for hybrid-electric vehicles
AbstractâThis paper describes the application of state-estimation
techniques for the real-time prediction of the state-of-charge
(SoC) and state-of-health (SoH) of lead-acid cells. Specifically,
approaches based on the well-known Kalman Filter (KF) and
Extended Kalman Filter (EKF), are presented, using a generic
cell model, to provide correction for offset, drift, and long-term
state divergenceâan unfortunate feature of more traditional
coulomb-counting techniques. The underlying dynamic behavior
of each cell is modeled using two capacitors (bulk and surface) and
three resistors (terminal, surface, and end), from which the SoC
is determined from the voltage present on the bulk capacitor. Although
the structure of the model has been previously reported for
describing the characteristics of lithium-ion cells, here it is shown
to also provide an alternative to commonly employed models of
lead-acid cells when used in conjunction with a KF to estimate
SoC and an EKF to predict state-of-health (SoH). Measurements
using real-time road data are used to compare the performance
of conventional integration-based methods for estimating SoC
with those predicted from the presented state estimation schemes.
Results show that the proposed methodologies are superior to
more traditional techniques, with accuracy in determining the
SoC within 2% being demonstrated. Moreover, by accounting
for the nonlinearities present within the dynamic cell model, the
application of an EKF is shown to provide verifiable indications of
SoH of the cell pack
New battery model and state-of-health determination through subspace parameter estimation and state-observer techniques
This paper describes a novel adaptive battery model based on a remapped variant of the well-known Randles' lead-acid model. Remapping of the model is shown to allow improved modeling capabilities and accurate estimates of dynamic circuit parameters when used with subspace parameter-estimation techniques. The performance of the proposed methodology is demonstrated by application to batteries for an all-electric personal rapid transit vehicle from the Urban Light TRAnsport (ULTRA) program, which is designated for use at Heathrow Airport, U. K. The advantages of the proposed model over the Randles' circuit are demonstrated by comparisons with alternative observer/estimator techniques, such as the basic Utkin observer and the Kalman estimator. These techniques correctly identify and converge on voltages associated with the battery state-of-charge (SoC), despite erroneous initial conditions, thereby overcoming problems attributed to SoC drift (incurred by Coulomb-counting methods due to overcharging or ambient temperature fluctuations). Observation of these voltages, as well as online monitoring of the degradation of the estimated dynamic model parameters, allows battery aging (state-of-health) to also be assessed and, thereby, cell failure to be predicted. Due to the adaptive nature of the proposed algorithms, the techniques are suitable for applications over a wide range of operating environments, including large ambient temperature variations. Moreover, alternative battery topologies may also be accommodated by the automatic adjustment of the underlying state-space models used in both the parameter-estimation and observer/estimator stages
- âŠ