Cognitive-Based Solutions to Spectrum Issues in Future Satellite Communication Systems

With particular attention to Satellite Communications (SatComs), cognitive-based solutions are investigated. With cognitive-based solutions we refer to all those techniques that aim at improving spectrum utilization of the available spectrum and rely on the knowledge of the environment in which the systems operate. As a matter of fact, an improved spectrum utilization enables higher throughput capacities that will satisfy the future markets and demands of an increasingly connected world. Throughout the thesis, several techniques are proposed, developed, and assessed with respect to specific scenarios of interest. Particular focus has been put on spectrum awareness techniques for system coexistence, and on spectrum exploitation techniques for an improved efficiency in terms of resource utilization

Cooperative Power and DoT Estimation for a Directive Source

Reliable estimation of the source power as well as the direction of transmission (DoT) is required in a large number of applications, e.g. radio environment mapping for cognitive radios, security, system performance and interference monitoring. In this paper, we develop a multi-sensor cooperative estimation algorithm for joint power and DoT estimation of a source with a known location and equipped with a directive antenna pattern. The source signal is assumed to be known, e.g. a training sequence, and the channel is modeled by the free-space path loss. Simulation results show that the developed algorithm can deliver a reliable estimation accuracy

An Overview of Signal Processing Techniques for Joint Communication and Radar Sensing

Joint communication and radar sensing (JCR) represents an emerging research field aiming to integrate the above two functionalities into a single system, by sharing the majority of hardware, signal processing modules and, in a typical case, the transmitted signal. The close cooperation of the communication and sensing functions can enable significant improvement of spectrum efficiency, reduction of device size, cost and power consumption, and improvement of performance of both functions. Advanced signal processing techniques are critical for making the integration efficient, from transmission signal design to receiver processing. This paper provides a comprehensive overview of the state-of-the-art on JCR systems from the signal processing perspective. A balanced coverage on both transmitter and receiver is provided for three types of JCR systems, namely, communication-centric, radar-centric, and joint design and optimization

Self consistent bathymetric mapping from robotic vehicles in the deep ocean

Submitted In partial fulfillment of the requirements for the degree of Doctor of Philosophy at the Massachusetts Institute of Technology and Woods Hole Oceanographic Institution June 2005Obtaining accurate and repeatable navigation for robotic vehicles in the deep ocean is difficult and consequently a limiting factor when constructing vehicle-based bathymetric maps. This thesis presents a methodology to produce self-consistent maps and simultaneously improve vehicle position estimation by exploiting accurate local navigation and utilizing terrain relative measurements. It is common for errors in the vehicle position estimate to far exceed the errors associated with the acoustic range sensor. This disparity creates inconsistency when an area is imaged multiple times and causes artifacts that distort map integrity. Our technique utilizes small terrain "submaps" that can be pairwise registered and used to additionally constrain the vehicle position estimates in accordance with actual bottom topography. A delayed state Kalman filter is used to incorporate these sub-map registrations as relative position measurements between previously visited vehicle locations. The archiving of previous positions in a filter state vector allows for continual adjustment of the sub-map locations. The terrain registration is accomplished using a two dimensional correlation and a six degree of freedom point cloud alignment method tailored for bathymetric data. The complete bathymetric map is then created from the union of all sub-maps that have been aligned in a consistent manner. Experimental results from the fully automated processing of a multibeam survey over the TAG hydrothermal structure at the Mid-Atlantic ridge are presented to validate the proposed method.This work was funded by the CenSSIS ERC of the Nation Science Foundation under grant EEC-9986821 and in part by the Woods Hole Oceanographic Institution through a grant from the Penzance Foundation

Indoor/Outdoor Location of Cellular Handsets Based on Received Signal Strength

Indoor/Outdoor Location of Cellular Handsets Based on Received Signal Strength Jian Zhu 123 pages Directed by Dr. Gregory D. Durgin Accurate geo-location is an important emerging technology for public safety, commercial use, and military application. Especially, in the United States, the wireless Enhanced 911 (E911) rules by the Federal Communication Commission (FCC) seek to provide 911 dispatchers with additional information on wireless 911 calls. This dissertation presents a novel technique for indoor/outdoor location of cellular handsets based on received signal strength (RSS) measurements taken by a cellular handset of the surrounding base stations. RSS location accuracy for different environments is studied as a function of base station separation distance, cell sector density, measurement density, radio propagation environment, and accuracy of measurement. The analytical and experimental results in this thesis serve as a guideline for the accuracy of RSS signature location technology under different conditions. Accurate outdoor to indoor penetration models are proposed and validated for dense urban areas by introducing pseudo-transmitters to simulate the wave-guiding effects in urban canyon environments. A set of location algorithms is developed to improve location accuracy. Furthermore, an algorithm to discriminate between indoor and outdoor users is proposed and validated. The research results demonstrate the feasibility of RSS location techniques to meet the FCCs requirements for E911 accuracy in urban and semi-urban environments. The techniques remain accurate for indoor handsets. The results also suggest that a hybridization of the handset-based GPS method and the RSS signature method may prove to be the most effective solution for locating handsets across a range of environments; including rural, suburban, dense urban, and indoor.Ph.D.Committee Chair: Durgin, Gregory; Committee Member: Hunter, Michael; Committee Member: Lanterman, Aaron; Committee Member: Li, Ye; Committee Member: Steffes, Pau

Abstracts on Radio Direction Finding (1899 - 1995)

The files on this record represent the various databases that originally composed the CD-ROM issue of "Abstracts on Radio Direction Finding" database, which is now part of the Dudley Knox Library's Abstracts and Selected Full Text Documents on Radio Direction Finding (1899 - 1995) Collection. (See Calhoun record https://calhoun.nps.edu/handle/10945/57364 for further information on this collection and the bibliography). Due to issues of technological obsolescence preventing current and future audiences from accessing the bibliography, DKL exported and converted into the three files on this record the various databases contained in the CD-ROM. The contents of these files are: 1) RDFA_CompleteBibliography_xls.zip [RDFA_CompleteBibliography.xls: Metadata for the complete bibliography, in Excel 97-2003 Workbook format; RDFA_Glossary.xls: Glossary of terms, in Excel 97-2003 Workbookformat; RDFA_Biographies.xls: Biographies of leading figures, in Excel 97-2003 Workbook format]; 2) RDFA_CompleteBibliography_csv.zip [RDFA_CompleteBibliography.TXT: Metadata for the complete bibliography, in CSV format; RDFA_Glossary.TXT: Glossary of terms, in CSV format; RDFA_Biographies.TXT: Biographies of leading figures, in CSV format]; 3) RDFA_CompleteBibliography.pdf: A human readable display of the bibliographic data, as a means of double-checking any possible deviations due to conversion

1-D broadside-radiating leaky-wave antenna based on a numerically synthesized impedance surface

A newly-developed deterministic numerical technique for the automated design of metasurface antennas is applied here for the first time to the design of a 1-D printed Leaky-Wave Antenna (LWA) for broadside radiation. The surface impedance synthesis process does not require any a priori knowledge on the impedance pattern, and starts from a mask constraint on the desired far-field and practical bounds on the unit cell impedance values. The designed reactance surface for broadside radiation exhibits a non conventional patterning; this highlights the merit of using an automated design process for a design well known to be challenging for analytical methods. The antenna is physically implemented with an array of metal strips with varying gap widths and simulation results show very good agreement with the predicted performance

Antennas and Propagation

This Special Issue gathers topics of utmost interest in the field of antennas and propagation, such as: new directions and challenges in antenna design and propagation; innovative antenna technologies for space applications; metamaterial, metasurface and other periodic structures; antennas for 5G; electromagnetic field measurements and remote sensing applications

Proceedings of the Third International Mobile Satellite Conference (IMSC 1993)

Satellite-based mobile communications systems provide voice and data communications to users over a vast geographic area. The users may communicate via mobile or hand-held terminals, which may also provide access to terrestrial cellular communications services. While the first and second International Mobile Satellite Conferences (IMSC) mostly concentrated on technical advances, this Third IMSC also focuses on the increasing worldwide commercial activities in Mobile Satellite Services. Because of the large service areas provided by such systems, it is important to consider political and regulatory issues in addition to technical and user requirements issues. Topics covered include: the direct broadcast of audio programming from satellites; spacecraft technology; regulatory and policy considerations; advanced system concepts and analysis; propagation; and user requirements and applications