837 research outputs found
Massive MIMO performance evaluation based on measured propagation data
Massive MIMO, also known as very-large MIMO or large-scale antenna systems,
is a new technique that potentially can offer large network capacities in
multi-user scenarios. With a massive MIMO system, we consider the case where a
base station equipped with a large number of antenna elements simultaneously
serves multiple single-antenna users in the same time-frequency resource. So
far, investigations are mostly based on theoretical channels with independent
and identically distributed (i.i.d.) complex Gaussian coefficients, i.e.,
i.i.d. Rayleigh channels. Here, we investigate how massive MIMO performs in
channels measured in real propagation environments. Channel measurements were
performed at 2.6 GHz using a virtual uniform linear array (ULA) which has a
physically large aperture, and a practical uniform cylindrical array (UCA)
which is more compact in size, both having 128 antenna ports. Based on
measurement data, we illustrate channel behavior of massive MIMO in three
representative propagation conditions, and evaluate the corresponding
performance. The investigation shows that the measured channels, for both array
types, allow us to achieve performance close to that in i.i.d. Rayleigh
channels. It is concluded that in real propagation environments we have
characteristics that can allow for efficient use of massive MIMO, i.e., the
theoretical advantages of this new technology can also be harvested in real
channels.Comment: IEEE Transactions on Wireless Communications, 201
Performance Analysis of Millimeter Wave Massive MIMO Systems in Centralized and Distributed Schemes
This paper considers downlink multi-user millimeter-wave massive multiple-input multiple-output (MIMO) systems in both centralized and distributed configurations, referred to as C-MIMO and D-MIMO, respectively. Assuming the fading channel is composite and comprised of both large-scale fading and small-scale fading, a hybrid precoding algorithm leveraging antenna array response vectors is applied into both the C-MIMO system with fully connected structure and the D-MIMO system with partially connected structure. First, the asymptotic spectral efficiency (SE) of an arbitrary user and the asymptotic average SE of the cell for the C-MIMO system are analyzed. Then, two radio access unit (RAU) selection algorithms are proposed for the D-MIMO system, based on minimal distance (D-based) and maximal signal-to-interference-plus-noise-ratio (SINR) (SINR-based), respectively. For the D-MIMO system with circular layout and D-based RAU selection algorithm, the upper bounds on the asymptotic SE of an arbitrary user and the asymptotic average SE of the cell are also investigated. Finally, numerical results are provided to assess the analytical results and evaluate the effects of the numbers of total transmit antennas and users on system performance. It is shown that, from the perspective of the cell, the D-MIMO system with D-based scheme outperforms the C-MIMO system and achieves almost alike performance compared with the SINR-based solution while requiring less complexity.Peer reviewe
Indoor wireless communications and applications
Chapter 3 addresses challenges in radio link and system design in indoor scenarios. Given the fact that most human activities take place in indoor environments, the need for supporting ubiquitous indoor data connectivity and location/tracking service becomes even more important than in the previous decades. Specific technical challenges addressed in this section are(i), modelling complex indoor radio channels for effective antenna deployment, (ii), potential of millimeter-wave (mm-wave) radios for supporting higher data rates, and (iii), feasible indoor localisation and tracking techniques, which are summarised in three dedicated sections of this chapter
Modelling Aspects of Planar Multi-Mode Antennas for Direction-of-Arrival Estimation
Multi-mode antennas are an alternative to classical antenna arrays, and hence
a promising emerging sensor technology for a vast variety of applications in
the areas of array signal processing and digital communications. An unsolved
problem is to describe the radiation pattern of multi-mode antennas in closed
analytic form based on calibration measurements or on electromagnetic field
(EMF) simulation data. As a solution, we investigate two modeling methods: One
is based on the array interpolation technique (AIT), the other one on wavefield
modeling (WM). Both methods are able to accurately interpolate quantized EMF
data of a given multi-mode antenna, in our case a planar four-port antenna
developed for the 6-8.5 GHz range. Since the modeling methods inherently depend
on parameter sets, we investigate the influence of the parameter choice on the
accuracy of both models. Furthermore, we evaluate the impact of modeling errors
for coherent maximum-likelihood direction-of-arrival (DoA) estimation given
different model parameters. Numerical results are presented for a single
polarization component. Simulations reveal that the estimation bias introduced
by model errors is subject to the chosen model parameters. Finally, we provide
optimized sets of AIT and WM parameters for the multi-mode antenna under
investigation. With these parameter sets, EMF data samples can be reproduced in
interpolated form with high angular resolution
Dynamic mmWave Channel Emulation in a Cost-Effective MPAC with Dominant-Cluster Concept
Millimeter-Wave (mmWave) massive multiple-input multiple-output (MIMO) has
been considered as a key enabler for the fifth-generation (5G) communications.
It is essential to design and test mmWave 5G devices under various realistic
scenarios, since the radio propagation channels pose intrinsic limitations on
the performance. This requires emulating realistic dynamic mmWave channels in a
reproducible manner in laboratories, which is the goal of this paper. In this
contribution, we firstly illustrate the dominant-cluster(s) concept, where the
non-dominant clusters in the mmWave channels are pruned, for mmWave 5G devices
applying massive MIMO beamforming. This demonstrates the importance and
necessity to accurately emulate the mmWave channels at a cluster level rather
than the composite-channel level. Thus, an over-the-air (OTA) emulation
strategy for dynamic mmWave channels is proposed based on the concept of
dominant-cluster(s) in a sectored multiprobe anechoic chamber (SMPAC). The key
design parameters including the probe number and the angular spacing of probes
are investigated through comprehensive simulations. A cost-effective
switchcircuit is also designed for this purpose and validated in the
simulation. Furthermore, a dynamic mmWave channel measured in an indoor
scenario at 28-30 GHz is presented, where the proposed emulation strategy is
also validated by reproducing the measured reality.Comment: Accepted by IEEE Transactions on Antennas and Propagatio
5G Uniform linear arrays with beamforming and spatial multiplexing at 28 GHz, 37 GHz, 64 GHz and 71 GHz for outdoor urban communication: A two-level approach
Multiple-input multiple-output (MIMO) spatial multiplexing and beamforming are regarded as key technology enablers for the fifth-generation (5G) millimeter wave (mmWave) mobile radio services. Spatial multiplexing requires sufficiently separated and incoherent antenna array elements, while in the case of beamforming, the antenna array elements need to be coherent and closely spaced. Extensive 28-, 60-, and 73-GHz ultra-wideband propagation measurements in cities of New York City and Austin have indicated formation of two or more spatial lobes for the angles-of-departure and angles-of-arrival even for line-of-sight (LOS) transmission, which is an advantageous feature of mmWave channels, indicating that the transmitting and receiving array antenna elements can be co-located, thus enabling a single architecture for both spatial multiplexing and beamforming. In this paper, a two-level beamforming architecture for uniform linear arrays is proposed that leverages the formation of these spatial lobes. The antenna array is composed of sub-arrays, and the impact of sub-array spacing on the spectral efficiency is investigated through simulations using a channel simulator named NYUSIM developed based on extensive measured data at mmWave frequencies. Simulation results indicate spectral efficiencies of 18.5–28.1 bits/s/Hz with a sub-array spacing of 16 wavelengths for an outdoor mmWave urban LOS channel. The spectral efficiencies obtained are for single-user (SU) MIMO transmission at the recently allocated 5G carrier frequencies in July 2016. The method and results in this paper are useful for designing antenna array architectures for 5G wireless systems
- …