Survey on wireless technology trade-offs for the industrial internet of things

Aside from vast deployment cost reduction, Industrial Wireless Sensor and Actuator Networks (IWSAN) introduce a new level of industrial connectivity. Wireless connection of sensors and actuators in industrial environments not only enables wireless monitoring and actuation, it also enables coordination of production stages, connecting mobile robots and autonomous transport vehicles, as well as localization and tracking of assets. All these opportunities already inspired the development of many wireless technologies in an effort to fully enable Industry 4.0. However, different technologies significantly differ in performance and capabilities, none being capable of supporting all industrial use cases. When designing a network solution, one must be aware of the capabilities and the trade-offs that prospective technologies have. This paper evaluates the technologies potentially suitable for IWSAN solutions covering an entire industrial site with limited infrastructure cost and discusses their trade-offs in an effort to provide information for choosing the most suitable technology for the use case of interest. The comparative discussion presented in this paper aims to enable engineers to choose the most suitable wireless technology for their specific IWSAN deployment

Techniques for improving the performance of frequency-hopped multiple-access communication systems

Imperial Users onl

Increasing transmission efficiency with advanced signal processing

Optical CDMA is an advanced and flexible communication technology with a potential to offer very energy efficient and highly scalable networking. In addition it can also deliver increased physical layer privacy and on-demand bandwidth sharing management. We have developed, extensively investigated, and experimentally demonstrated highly scalable approach to incoherent OCDMA which can very efficiently increase the number of simultaneous users. In addition, the introduction of an advanced photonic signal processing results in an overall system power budget improvement by nearly 3dB. Error-free operation with the BER less than 10-12 was achieved. We have also shown that with demonstrated approach we can dramatically improve number of simultaneous network users (up to ten times) while keeping the related hardware count unchanged. By comparing this results to DWDM concept, this substantial increase in number of simultaneous users did not require to add any additional wavelength laser sources and was achieved by employing just three communication wavelengths

Reliable Physical Layer Network Coding

When two or more users in a wireless network transmit simultaneously, their electromagnetic signals are linearly superimposed on the channel. As a result, a receiver that is interested in one of these signals sees the others as unwanted interference. This property of the wireless medium is typically viewed as a hindrance to reliable communication over a network. However, using a recently developed coding strategy, interference can in fact be harnessed for network coding. In a wired network, (linear) network coding refers to each intermediate node taking its received packets, computing a linear combination over a finite field, and forwarding the outcome towards the destinations. Then, given an appropriate set of linear combinations, a destination can solve for its desired packets. For certain topologies, this strategy can attain significantly higher throughputs over routing-based strategies. Reliable physical layer network coding takes this idea one step further: using judiciously chosen linear error-correcting codes, intermediate nodes in a wireless network can directly recover linear combinations of the packets from the observed noisy superpositions of transmitted signals. Starting with some simple examples, this survey explores the core ideas behind this new technique and the possibilities it offers for communication over interference-limited wireless networks.Comment: 19 pages, 14 figures, survey paper to appear in Proceedings of the IEE

Characterization of multi-channel interference

Multi-channel communication protocols in wireless networks usually assume perfect orthogonality between wireless channels or consider only the use of interference-free channels. The first approach may overestimate the performance whereas the second approach may fail to utilize the spectrum efficiently. Therefore, a more realistic approach would be the careful use of interfering channels by controlling the interference at an acceptable level. We present a methodology to estimate the packet error rate (PER) due to inter-channel interference in a wireless network. The methodology experimentally characterizes the multi-channel interference and analytically estimates it based on the observations from the experiments. Furthermore, the analytical estimation is used in simulations to derive estimates of the capacity in larger networks. Simulation results show that the achievable network capacity, which is defined as the number of simultaneous transmissions, significantly increases with realistic interfering channels compared with the use of only orthogonal channels. When we consider the same number of channels, the achievable capacity with realistic interfering channels can be close to the capacity of idealistic orthogonal channels. This shows that overlapping channels which constitute a much smaller band, provides more efficient use of the spectrum. Finally, we explore the correctness of channel orthogonality and show why this assumption may fail in a practical setting

Study of spread spectrum multiple access systems for satellite communications with overlay on current services

The feasibility of using spread spectrum techniques to provide a low-cost multiple access system for a very large number of low data terminals was investigated. Two applications of spread spectrum technology to very small aperture terminal (VSAT) satellite communication networks are presented. Two spread spectrum multiple access systems which use a form of noncoherent M-ary FSK (MFSK) as the primary modulation are described and the throughput analyzed. The analysis considers such factors as satellite power constraints and adjacent satellite interference. Also considered is the effect of on-board processing on the multiple access efficiency and the feasibility of overlaying low data rate spread spectrum signals on existing satellite traffic as a form of frequency reuse is investigated. The use of chirp is examined for spread spectrum communications. In a chirp communication system, each data bit is converted into one or more up or down sweeps of frequency, which spread the RF energy across a broad range of frequencies. Several different forms of chirp communication systems are considered, and a multiple-chirp coded system is proposed for overlay service. The mutual interference problem is examined in detail and a performance analysis undertaken for the case of a chirp data channel overlaid on a video channel