Software Defined Applications in Cellular and Optical Networks

abstract: Small wireless cells have the potential to overcome bottlenecks in wireless access through the sharing of spectrum resources. A novel access backhaul network architecture based on a Smart Gateway (Sm-GW) between the small cell base stations, e.g., LTE eNBs, and the conventional backhaul gateways, e.g., LTE Servicing/Packet Gateways (S/P-GWs) has been introduced to address the bottleneck. The Sm-GW flexibly schedules uplink transmissions for the eNBs. Based on software defined networking (SDN) a management mechanism that allows multiple operator to flexibly inter-operate via multiple Sm-GWs with a multitude of small cells has been proposed. This dissertation also comprehensively survey the studies that examine the SDN paradigm in optical networks. Along with the PHY functional split improvements, the performance of Distributed Converged Cable Access Platform (DCCAP) in the cable architectures especially for the Remote-PHY and Remote-MACPHY nodes has been evaluated. In the PHY functional split, in addition to the re-use of infrastructure with a common FFT module for multiple technologies, a novel cross functional split interaction to cache the repetitive QAM symbols across time at the remote node to reduce the transmission rate requirement of the fronthaul link has been proposed.Dissertation/ThesisDoctoral Dissertation Electrical Engineering 201

Characterization of wavelength tunable lasers for use in wavelength packet switched networks

The telecom industry's greatest challenge, and the optical systems and components vendors' biggest opportunity is enabling providers to expand their data services. The solution lies in making optical networks more responsive to customer needs, i.e., making them more rapidly adaptable. One possible technique to achieve this is to employ wavelength tunable optical transmitters. The importance of tunability grows greater every year, as the average number of channels deployed on DWDM platforms increases. By deploying tunable lasers it is much easier to facilitate forecasting, planning and last minute changes in the network. This technology provides with solution for inventory reduction. It also offers solution for fast switching at packet level. The conducted research activities of the project was divided in two work packages: 1. Full static characterization-the laser used in the experiment was a butterfly-packaged Sampled Grating DBR laser with four electrically tunable sections. LabView programme was developed for distant control of the equipment and the laser itself. The parameters required for creating a look-up table with the exact currents for the four sections of the laser, namely wavelength, side mode suppression ratio and output power, were transferred to tables. Based on those tables the currents were defined for each of the 96 different accessible channels. The channel allocation is based on the 50 GHz spacing grid. A detailed analysis of the tuning mechanisms is provided. 2. Dynamic characterization and BER performance in wavelength packet switched WDM systems-a commercially available module was used supplied with the software package for controlling the wavelength channels and setting the laser to switch between any accessible channel. The laser is DBR laser without SOA integration so the dynamic tunability can be investigated. As the switching in the nanosecond regime is executed in the electrical domain, analysis of the switching parameters concerning the electrical circuit as well as laser structure is provided. The actual switching time was defined. The degradation in system performance due to spurious wavelength signals emitted from the tunable module during the switching event and their interference with other active channels was demonstrated by examining the presence of an error floor in the BER rate against received power measurements

Cost-effective Information and Communication Technology (ICT) infrastructure for Tanziania

The research conducted an Information and Communication Technology (ICT) field survey, the results revealed that Tanzania is still lagging behind in the ICT sector due to the lack of an internationally connected terrestrial ICT infrastructure; Internet connectivity to the rest of the world is via expensive satellite links, thus leaving the majority of the population unable to access the Internet services due to its high cost. Therefore, an ICT backbone infrastructure is designed that exploits optical DWDM network technology, which un-locks bandwidth bottlenecks and provides higher capacity which will provide ICT services such as Internet, voice, videos and other multimedia interactions at an affordable cost to the majority of the people who live in the urban and rural areas of Tanzania. The research analyses and compares the performance, and system impairments, in a DWDM system at data transmission rates of 2.5 Gb/s and 10 Gb/s per wavelength channel. The simulation results show that a data transmission rate of 2.5 Gb/s can be successfully transmitted over a greater distance than 10 Gb/s with minimum system impairments. Also operating at the lower data rate delivers a good system performance for the required ICT services. A forty-channel DWDM system will provide a bandwidth of 100 Gb/s. A cost analysis demonstrates the economic worth of incorporating existing optical fibre installations into an optical DWDM network for the creation of an affordable ICT backbone infrastructure; this approach is compared with building a completely new optical fibre DWDM network or a SONET/SDH network. The results show that the ICT backbone infrastructure built with existing SSMF DWDM network technology is a good investment, in terms of profitability, even if the Internet charges are reduced to half current rates. The case for building a completely new optical fibre DWDM network or a SONET/SDH network is difficult to justify using current financial data

New Combinations: Changing Technologies and Infrastructures and the Business Organizations That Will Deal with Them.

This tale is somewhat unique. It is probably one of the few panels, or the only panel in which there is a certain level of agreement. In fact, every one in this room probably has the basic agreement with this panel, that changes in regulation and changes in policy that we are struggling with are driven by changes in technology. This panel has been put together to look at changes in technology. It has three overall goals. The first is, as you heard one of the panels this morning talk about, to talk about technology itself to try to gain some type of understanding. As regulators or practitioners of law in the area, it is hard to be effective without some type of understanding of just what the technology is that we are supposed to be regulating or trying to give people advice concerning. The second area that this panel will hopefully inform us on is how technology continues to change. Many times we look back and see how technological changes have occurred, and how they have forced us to change. However, there is little consideration for the fact that these technologies continue to change and there will be other challenges or maybe even solutions to current problems that will result from that change in technology. And the final area we hope to provide information on is, as technology changes and as it causes regulators to address new issues, how the utilities, are themselves very different, and have been changed and shaped by this changing technology. This group, I think, can demonstrate very well how the conversion of the different technologies have shaped most of the companies and people who are on the panel

Multilayer Protection with Availability Guarantees in Optical WDM Networks

n/

Schemes for building an efficient all-optical virtual private network.

by Tam Scott Kin Lun.Thesis submitted in: October 2005.Thesis (M.Phil.)--Chinese University of Hong Kong, 2006.Includes bibliographical references (leaves 58-64).Abstracts in English and Chinese.Chapter 1. --- Introduction --- p.1Chapter 1.1. --- Optical Networks --- p.1Chapter 1.1.1. --- IP over Optical Networks --- p.1Chapter 1.1.2. --- Challenges in Optical Networks --- p.4Chapter 1.2. --- Virtual Private Networks (VPN) --- p.5Chapter 1.2.1. --- CE Based VPN --- p.6Chapter 1.2.2. --- Network Based VPN --- p.7Chapter 1.2.2.1. --- MPLS Layer 2 VPN --- p.8Chapter 1.2.2.2. --- MPLS Layer 3 VPN --- p.9Chapter 1.2.3. --- Optical VPN --- p.9Chapter 1.2.4. --- Challenges in VPN Technologies --- p.11Chapter 1.3. --- Objective of this Thesis --- p.11Chapter 1.4. --- Outline of this Thesis --- p.12Chapter 2. --- Architecture of an All-Optical VPN --- p.13Chapter 2.1. --- Introduction --- p.13Chapter 2.2. --- Networking Vendor Activities --- p.13Chapter 2.3. --- Service Provider Activities --- p.15Chapter 2.4. --- Standard Bodies Activities --- p.16Chapter 2.5. --- Requirements for All-Optical VPN --- p.17Chapter 2.6. --- Reconfigurability of an All-Optical VPN --- p.19Chapter 2.7. --- Switching Methods in All-Optical VPN --- p.20Chapter 2.8. --- Survivability of an All-Optical VPN --- p.23Chapter 3. --- Maximizing the Utilization Of A Survivable Multi-Ring WDM Network --- p.25Chapter 3.1. --- Introduction --- p.25Chapter 3.2. --- Background --- p.25Chapter 3.3. --- Method --- p.26Chapter 3.3.1. --- Effect on packet based services --- p.28Chapter 3.3.2. --- Effect on optical circuit based services --- p.28Chapter 3.4. --- Simulation results --- p.29Chapter 3.5. --- Chapter Summary --- p.36Chapter 4. --- Design of an All-Optical VPN Processing Engine --- p.37Chapter 4.1. --- Introduction --- p.37Chapter 4.2. --- Concepts of Optical Processors --- p.38Chapter 4.3. --- Design Principles of the All-Optical VPN Processing Engine --- p.40Chapter 4.3.1. --- Systolic System --- p.41Chapter 4.3.2. --- Design Considerations of an Optical Processing Cell --- p.42Chapter 4.3.2.1. --- Mach-Zehnder Structures --- p.43Chapter 4.3.2.2. --- Vertical Cavity Semiconductor Optical Amplifier --- p.43Chapter 4.3.2.3. --- The Optical Processing Cell --- p.44Chapter 4.3.3. --- All-Optical VPN Processing Engine --- p.47Chapter 4.4. --- Design Evaluation --- p.49Chapter 4.5. --- Application Example --- p.50Chapter 4.6. --- Chapter Summary --- p.54Chapter 5. --- Conclusion --- p.55Chapter 5.1. --- Summary of the Thesis --- p.55Chapter 5.2. --- Future Works --- p.56Chapter 6. --- References --- p.5

Fiber optic networks: fairness, access controls and prototyping

Fiber optic technologies enabling high-speed, high-capacity digital information transport have only been around for about 3 decades but in their short life have completely revolutionized global communications. To keep pace with the growing demand for digital communications and entertainment, fiber optic networks and technologies continue to grow and mature. As new applications in telecommunications, computer networking and entertainment emerge, reliability, scalability, and high Quality of Service (QoS) requirements are increasing the complexity of optical transport networks.;This dissertation is devoted to providing a discussion of existing and emerging technologies in modern optical communications networks. To this end, we first outline traditional telecommunication and data networks that enable high speed, long distance information transport. We examine various network architectures including mesh, ring and bus topologies of modern Local, Metropolitan and Wide area networks. We present some of the most successful technologies used in todays communications networks, outline their shortcomings and introduce promising new technologies to meet the demands of future transport networks.;The capacity of a single wavelength optical signal is 10 Gbps today and is likely to increase to over 100 Gbps as demonstrated in laboratory settings. In addition, Wavelength Division Multiplexing (WDM) techniques, able to support over 160 wavelengths on a single optical fiber, have effectively increased the capacity of a single optical fiber to well over 1 Tbps. However, user requirements are often of a sub-wavelength order. This mis-match between individual user requirements and single wavelength offerings necessitates bandwidth sharing mechanisms to efficiently multiplex multiple low rate streams on to high rate wavelength channels, called traffic grooming.;This dissertation examines traffic grooming in the context of circuit, packet, burst and trail switching paradigms. Of primary interest are the Media Access Control (MAC) protocols used to provide QoS and fairness in optical networks. We present a comprehensive discussion of the most recognized fairness models and MACs for ring and bus networks which lay the groundwork for the development of the Robust, Dynamic and Fair Network (RDFN) protocol for ring networks. The RDFN protocol is a novel solution to fairly share ring bandwidth for bursty asynchronous data traffic while providing bandwidth and delay guarantees for synchronous voice traffic.;We explain the light-trail (LT) architecture and technology introduced in [37] as a solution to providing high network resource utilization, seamless scalability and network transparency for metropolitan area networks. The goal of light-trails is to eliminate Optical Electronic Optical (O-E-O) conversion, minimize active switching, maximize wavelength utilization, and offer protocol and bit-rate transparency to address the growing demands placed on WDM networks. Light-trail technology is a physical layer architecture that combines commercially available optical components to allow multiple nodes along a lightpath to participate in time multiplexed communication without the need for burst or packet level switch reconfiguration. We present three medium access control protocols for light-trails that provide collision protection but do not consider fair network access. As an improvement to these light-trail MAC protocols we introduce the Token LT and light-trail Fair Access (LT-FA) MAC protocols and evaluate their performance. We illustrate how fairness is achieved and access delay guarantees are made to satisfy the bandwidth budget fairness model. The goal of light-trails and our access control solution is to combine commercially available components with emerging network technologies to provide a transparent, reliable and highly scalable communication network.;The second area of discussion in this dissertation deals with the rapid prototyping platform. We discuss how the reconfigurable rapid prototyping platform (RRPP) is being utilized to bridge the gap between academic research, education and industry. We provide details of the Real-time Radon transform and the Griffin parallel computing platform implemented using the RRPP. We discuss how the RRPP provides additional visibility to academic research initiatives and facilitates understanding of system level designs. As a proof of concept, we introduce the light-trail testbed developed at the High Speed Systems Engineering lab. We discuss how a light-trail test bed has been developed using the RRPP to provide additional insight on the real-world limitations of light-trail technology. We provide details on its operation and discuss the steps required to and decisions made to realize test-bed operation. Two applications are presented to illustrate the use of the LT-FA MAC in the test-bed and demonstrate streaming media over light-trails.;As a whole, this dissertation aims to provide a comprehensive discussion of current and future technologies and trends for optical communication networks. In addition, we provide media access control solutions for ring and bus networks to address fair resource sharing and access delay guarantees. The light-trail testbed demonstrates proof of concept and outlines system level design challenges for future optical networks