5 research outputs found

    An intelligent capacity management system for interface converter in AC-DC hybrid microgrids

    Full text link
    An interface converter (IC) is used in an AC-DC hybrid microgrid (HMG) and its main tasks are frequency regulation in the AC side, adjusting the DC voltage, and controlling the power flow between AC/DC sides based on the droop control method. The IC should be capable of providing ancillary services such as reactive power supply and compensation of unbalanced and harmonic components in the AC side. However, the use of the IC to provide ancillary services occupies its capacity, which may interfere with the main tasks of the IC. In addition, it is shown in this paper that in unbalanced conditions, the effective power capacity of the IC is reduced by considering the current limit of the converter. In this case, the converter may not be able to perform the main task and provide all the necessary ancillary services at the same time, otherwise, it may be exposed to an overcurrent condition. Therefore, an efficient strategy is needed to manage the IC converter capacity to facilitate optimal use of the entire IC capacity even in unbalanced conditions. Given this challenge, this paper proposes an intelligent strategy for managing the IC capacity, which prioritizes the realization of the main task and the provision of ancillary services. The proposed strategy is evaluated, and its effectiveness is proven by simulation results in Matlab/Simulink

    An overview of power quality enhancement techniques applied to distributed generation in electrical distribution networks

    Get PDF
    It is obvious that power quality is an important characteristic of today's distribution power systems as loads become more sensitive on the other hand nonlinear loads are increasing in the electrical distribution system. Considering the distributed nature of harmonic loads, the need for distributed power quality improvement (PQI) is inevitable. From years ago, researchers have been working on various kinds of filters and devices to enhance the overall power quality of power system, but today the nature of distribution system has been changed and power electronic based DGs play an important role in distribution grids. In this paper, a thorough survey is done on power quality enhancement devices with emphasis on ancillary services of multi-functional DGs. A literature review is also done on microgrids concept, testbeds and related control methods. Although there were some applications of DGs for PQI improvement these applications were not defined multi-functional DGs. Various control methods are studied and categorized regarding different viewpoints in the literature. Finally, a couple of thorough comparisons are done between the available techniques considering the nature, capabilities, advantages and implementation costs

    Control of Shunt Active Filters with Actuation and Current Limits

    No full text
    In this brief, a plug-in unit is presented to manage control voltage saturation and maximum current limit in shunt active filters (SAFs), where unconstrained control algorithms are already defined. The proposed unit extends the operating region of such devices, i.e., under large transients and overload conditions, with performance guarantees. Therefore, improved robustness, availability, and composability of SAFs are obtained. The solution is composed of two parts. An antiwindup (AW) unit is defined to deal with control input saturation by modifying the current references through a suitably designed additional dynamics. In addition, a current saturation strategy is formulated. Again the current reference is modified, accounting for the limitations of the system, augmented with the AW scheme. The approach is valid for any kind of unconstrained controller adopted to steer SAFs. Here, results are presented considering an internal-model-based current controller. Simulation and experimental tests confirm the effectiveness of the method
    corecore