835 research outputs found
Reversible data hiding in JPEG images based on adjustable padding
In this paper, we propose a reversible data hiding scheme that enables an adjustable amount of information to be embedded in JPEG images based on padding strategy. The proposed embedding algorithm only modifies, in a subtle manner, an adjustable number of zero-valued quantised DCT coefficients to embed the message. Hence, compared with a state-of-the-art based on histogram shifting, the proposed scheme has a relatively low distortion to the host images. In addition to this, we found that by representing the message in ternary instead of in binary, we can embed a greater amount of information while the level of distortion remains unchanged. Experimental results support that the proposed scheme can achieve better visual quality of the marked JPEG image than the histogram shifting based scheme. The proposed scheme also outperforms this state-of-the-art in terms of the ease of implementation
Recommended from our members
Novel entropy coding and its application of the compression of 3D image and video signals
This thesis was submitted for the award of Doctor of Philosophy and was awarded by Brunel University LondonThe broadcast industry is moving future Digital Television towards Super high resolution TV (4k or 8k) and/or 3D TV. This ultimately will increase the demand on data rate and subsequently the demand for highly efficient codecs. One of the techniques that researchers found it one of the promising technologies in the industry in the next few years is 3D Integral Image and Video due to its simplicity and mimics the reality, independently on viewer aid, one of the challenges of the 3D Integral technology is to improve the compression algorithms to adequate the high resolution and exploit the advantages of the characteristics of this technology. The research scope of this thesis includes designing a novel coding for the 3D Integral image and video compression. Firstly to address the compression of 3D Integral imaging the research proposes novel entropy coding which will be implemented first on 2D traditional images content in order to compare it with the other traditional common standards then will be applied on 3D Integra image and video. This approach seeks to achieve high performance represented by high image quality and low bit rate in association with low computational complexity. Secondly, new algorithm will be proposed in an attempt to improve and develop the transform techniques performance, initially by using a new adaptive 3D-DCT algorithm then by proposing a new hybrid 3D DWT-DCT algorithm via exploiting the advantages of each technique and get rid of the artifact that each technique of them suffers from. Finally, the proposed entropy coding will be further implemented to the 3D integral video in association with another proposed algorithm that based on calculating the motion vector on the average viewpoint for each frame. This approach seeks to minimize the complexity and reduce the speed without affecting the Human Visual System (HVS) performance. Number of block matching techniques will be used to investigate the best block matching technique that is adequate for the new proposed 3D integral video algorithm
Efficient data encoder for endoscopic imaging applications
The invention of medical imaging technology revolved the process of diagnosing diseases and opened a new world for better studying inside of the human body. In order to capture images from different human organs, different devices have been developed. Gastro-Endoscopy is an example of a medical imaging device which captures images from human gastrointestinal. With the advancement of technology, the issues regarding such devices started to get rectified. For example, with the invention of swallow-able pill photographer which is called Wireless Capsule Endoscopy (WCE); pain, time, and bleeding risk for patients are radically decreased. The development of such technologies and devices has been increased and the demands for instruments providing better performance are grown along the time. In case ofWCE, the special feature requirements such as a small size (as small as an ordinary pill) and wireless transmission of the captured images dictate restrictions in power consumption and area usage.
In this research, the reduction of image encoder hardware cost for endoscopic imaging application has been focused. Several encoding algorithms have been studied and the comparative results are discussed. An efficient data encoder based on Lempel-Ziv-Welch (LZW) algorithm is presented. The encoder is a library-based one where the size of library can be modified by the user, and hence, the output data rate can be controlled according to the bandwidth requirement. The simulation is carried out with several endoscopic images and the results show that a minimum compression ratio of 92.5 % can be achieved with a minimum reconstruction quality of 30 dB. The hardware architecture and implementation result in Field-Programmable Gate Array (FPGA) for the proposed window-based LZW are also presented. A new lossy LZW algorithm is proposed and implemented in FPGA which provides promising results for such an application
Adaptive edge-based prediction for lossless image compression
Many lossless image compression methods have been suggested with established results hard to surpass. However there are some aspects that can be considered to improve the performance further. This research focuses on two-phase prediction-encoding method, separately studying each and suggesting new techniques.;In the prediction module, proposed Edge-Based-Predictor (EBP) and Least-Squares-Edge-Based-Predictor (LS-EBP) emphasizes on image edges and make predictions accordingly. EBP is a gradient based nonlinear adaptive predictor. EBP switches between prediction-rules based on few threshold parameters automatically determined by a pre-analysis procedure, which makes a first pass. The LS-EBP also uses these parameters, but optimizes the prediction for each pre-analysis assigned edge location, thus applying least-square approach only at the edge points.;For encoding module: a novel Burrows Wheeler Transform (BWT) inspired method is suggested, which performs better than applying the BWT directly on the images. We also present a context-based adaptive error modeling and encoding scheme. When coupled with the above-mentioned prediction schemes, the result is the best-known compression performance in the genre of compression schemes with same time and space complexity
Novel VLSI Architecture for Quantization and Variable Length Coding for H-264/AVC Video Compression Standard
Integrated multimedia systems process text, graphics, and other discrete media such as digital audio and video streams. In an uncompressed state, graphics, audio and video data, especially moving pictures, require large transmission and storage capacities which can be very expensive. Hence video compression has become a key component of any multimedia system or application. The ITU (International Telecommunications Union) and MPEG (Moving Picture Experts Group) have combined efforts to put together the next generation of video compression standard, the H.264/MPEG-4 PartlO/AVC, which was finalized in 2003. The H.264/AVC uses significantly improved and computationally intensive compression techniques to maximize performance. H.264/AVC compliant encoders achieve the same reproduction quality as encoders that are compliant with the previous standards while requiring 60% or less of the bit rate [2].
This thesis aims at designing two basic blocks of an ASIC capable of performing the H.264 video compression. These two blocks, the Quantizer, and Entropy Encoder implement the Baseline Profile of the H.264/AVC standard. The architecture is implemented in Register Transfer Level HDL and synthesized with Synopsys Design Compiler using TSMC 0.25(xm technology, giving us an estimate of the hardware requirements in real-time implementation. The quantizer block is capable of running at 309MHz and has a total area of 785K gates with a power requirement of 88.59mW. The entropy encoder unit is capable of running at 250 MHz and has a total area of 49K gates with a power requirement of 2.68mW. The high speed that is achieved in this thesis simply indicates that the two blocks Quantizer and Entropy Encoder can be used as IP embedded in the HDTV systems
An Adaptive Coding Pass Scanning Algorithm for Optimal Rate Control in Biomedical Images
High-efficiency, high-quality biomedical image compression is desirable especially for the telemedicine applications. This paper presents an adaptive coding pass scanning (ACPS) algorithm for optimal rate control. It can identify the significant portions of an image and discard insignificant ones as early as possible. As a result, waste of computational power and memory space can be avoided. We replace the benchmark algorithm known as postcompression rate distortion (PCRD) by ACPS. Experimental results show that ACPS is preferable to PCRD in terms of the rate distortion curve and computation time
Burrows Wheeler Compression Algorithm (BWCA) in Lossless Image Compression
The present paper discusses the implementation of BWCA in
lossless image compression. BWCA uses Burrows Wheeler
Transform (BWT) as its main transform. As one of combinatorial
compression algorithm which in particular reordered symbols
according to their following context, it becomes one of promising
approach in context modeling compression. BWT was initially
created for text compression, and here we study the impact of
BWCA method and its improvement when applied to image
compression. Since this application is quite different from the
original method aim, we analyze the pre- and post-processing
influences of BWT
- …