Particle-Based Sampling and Meshing of Surfaces in Multimaterial Volumes

Methods that faithfully and robustly capture the geometry of complex material interfaces in labeled volume data are important for generating realistic and accurate visualizations and simulations of real-world objects. The generation of such multimaterial models from measured data poses two unique challenges: first, the surfaces must be well-sampled with regular, efficient tessellations that are consistent across material boundaries; and second, the resulting meshes must respect the nonmanifold geometry of the multimaterial interfaces. This paper proposes a strategy for sampling and meshing multimaterial volumes using dynamic particle systems, including a novel, differentiable representation of the material junctions that allows the particle system to explicitly sample corners, edges, and surfaces of material intersections. The distributions of particles are controlled by fundamental sampling constraints, allowing Delaunay-based meshing algorithms to reliably extract watertight meshes of consistently high-quality.Engineering and Applied Science

Multi-Material Mesh Representation of Anatomical Structures for Deep Brain Stimulation Planning

The Dual Contouring algorithm (DC) is a grid-based process used to generate surface meshes from volumetric data. However, DC is unable to guarantee 2-manifold and watertight meshes due to the fact that it produces only one vertex for each grid cube. We present a modified Dual Contouring algorithm that is capable of overcoming this limitation. The proposed method decomposes an ambiguous grid cube into a set of tetrahedral cells and uses novel polygon generation rules that produce 2-manifold and watertight surface meshes with good-quality triangles. These meshes, being watertight and 2-manifold, are geometrically correct, and therefore can be used to initialize tetrahedral meshes. The 2-manifold DC method has been extended into the multi-material domain. Due to its multi-material nature, multi-material surface meshes will contain non-manifold elements along material interfaces or shared boundaries. The proposed multi-material DC algorithm can (1) generate multi-material surface meshes where each material sub-mesh is a 2-manifold and watertight mesh, (2) preserve the non-manifold elements along the material interfaces, and (3) ensure that the material interface or shared boundary between materials is consistent. The proposed method is used to generate multi-material surface meshes of deep brain anatomical structures from a digital atlas of the basal ganglia and thalamus. Although deep brain anatomical structures can be labeled as functionally separate, they are in fact continuous tracts of soft tissue in close proximity to each other. The multi-material meshes generated by the proposed DC algorithm can accurately represent the closely-packed deep brain structures as a single mesh consisting of multiple material sub-meshes. Each sub-mesh represents a distinct functional structure of the brain. Printed and/or digital atlases are important tools for medical research and surgical intervention. While these atlases can provide guidance in identifying anatomical structures, they do not take into account the wide variations in the shape and size of anatomical structures that occur from patient to patient. Accurate, patient-specific representations are especially important for surgical interventions like deep brain stimulation, where even small inaccuracies can result in dangerous complications. The last part of this research effort extends the discrete deformable 2-simplex mesh into the multi-material domain where geometry-based internal forces and image-based external forces are used in the deformation process. This multi-material deformable framework is used to segment anatomical structures of the deep brain region from Magnetic Resonance (MR) data

CAD-Based Porous Scaffold Design of Intervertebral Discs in Tissue Engineering

With the development and maturity of three-dimensional (3D) printing technology over the past decade, 3D printing has been widely investigated and applied in the field of tissue engineering to repair damaged tissues or organs, such as muscles, skin, and bones, Although a number of automated fabrication methods have been developed to create superior bio-scaffolds with specific surface properties and porosity, the major challenges still focus on how to fabricate 3D natural biodegradable scaffolds that have tailor properties such as intricate architecture, porosity, and interconnectivity in order to provide the needed structural integrity, strength, transport, and ideal microenvironment for cell- and tissue-growth. In this dissertation, a robust pipeline of fabricating bio-functional porous scaffolds of intervertebral discs based on different innovative porous design methodologies is illustrated. Firstly, a triply periodic minimal surface (TPMS) based parameterization method, which has overcome the integrity problem of traditional TPMS method, is presented in Chapter 3. Then, an implicit surface modeling (ISM) approach using tetrahedral implicit surface (TIS) is demonstrated and compared with the TPMS method in Chapter 4. In Chapter 5, we present an advanced porous design method with higher flexibility using anisotropic radial basis function (ARBF) and volumetric meshes. Based on all these advanced porous design methods, the 3D model of a bio-functional porous intervertebral disc scaffold can be easily designed and its physical model can also be manufactured through 3D printing. However, due to the unique shape of each intervertebral disc and the intricate topological relationship between the intervertebral discs and the spine, the accurate localization and segmentation of dysfunctional discs are regarded as another obstacle to fabricating porous 3D disc models. To that end, we discuss in Chapter 6 a segmentation technique of intervertebral discs from CT-scanned medical images by using deep convolutional neural networks. Additionally, some examples of applying different porous designs on the segmented intervertebral disc models are demonstrated in Chapter 6

3D Shape Understanding and Generation

In recent years, Machine Learning techniques have revolutionized solutions to longstanding image-based problems, like image classification, generation, semantic segmentation, object detection and many others. However, if we want to be able to build agents that can successfully interact with the real world, those techniques need to be capable of reasoning about the world as it truly is: a tridimensional space. There are two main challenges while handling 3D information in machine learning models. First, it is not clear what is the best 3D representation. For images, convolutional neural networks (CNNs) operating on raster images yield the best results in virtually all image-based benchmarks. For 3D data, the best combination of model and representation is still an open question. Second, 3D data is not available on the same scale as images – taking pictures is a common procedure in our daily lives, whereas capturing 3D content is an activity usually restricted to specialized professionals. This thesis is focused on addressing both of these issues. Which model and representation should we use for generating and recognizing 3D data? What are efficient ways of learning 3D representations from a few examples? Is it possible to leverage image data to build models capable of reasoning about the world in 3D? Our research findings show that it is possible to build models that efficiently generate 3D shapes as irregularly structured representations. Those models require significantly less memory while generating higher quality shapes than the ones based on voxels and multi-view representations. We start by developing techniques to generate shapes represented as point clouds. This class of models leads to high quality reconstructions and better unsupervised feature learning. However, since point clouds are not amenable to editing and human manipulation, we also present models capable of generating shapes as sets of shape handles -- simpler primitives that summarize complex 3D shapes and were specifically designed for high-level tasks and user interaction. Despite their effectiveness, those approaches require some form of 3D supervision, which is scarce. We present multiple alternatives to this problem. First, we investigate how approximate convex decomposition techniques can be used as self-supervision to improve recognition models when only a limited number of labels are available. Second, we study how neural network architectures induce shape priors that can be used in multiple reconstruction tasks -- using both volumetric and manifold representations. In this regime, reconstruction is performed from a single example -- either a sparse point cloud or multiple silhouettes. Finally, we demonstrate how to train generative models of 3D shapes without using any 3D supervision by combining differentiable rendering techniques and Generative Adversarial Networks