Constrained anti-disturbance control for a quadrotor based on differential flatness

The classical control design based on linearised model is widely used in practice even to those inherently nonlinear systems. Although linear design techniques are relatively mature and enjoy the simple structure in implementations, they can be prone to misbehaviour and failure when the system state is far away from the operating point. To avoid the drawbacks and exploit the advantages of linear design methods while tackling the system nonlinearity, a hybrid control structure is developed in this paper. First, the model predictive control is used to impose states and inputs constraints on the linearised model, which makes the linearisation satisfy the small-perturbation requirement and reduces the bound of linearisation error. On the other hand, a combination of disturbance observer based control and H1 control, called composite hierarchical anti-disturbance control, is constructed for the linear model to provide robustness against multiple disturbances. The constrained reference states and inputs generated by the outer-loop model predictive controller are asymptotically tracked by the inner-loop composite anti-disturbance controller. To demonstrate the performance of the proposed framework, a case study on quadrotor is conducted

Flat trajectory design and tracking with saturation guarantees: a nano-drone application

International audienceThis paper deals with the problem of trajectory planning and tracking of a quadcopter system based on the property of differential flatness. First, B-spline characterisations of the flat output allow for optimal trajectory generation subject to waypoint constraints, thrust and angle constraints while minimising the trajectory length. Second, the proposed tracking control strategy combines feedback linearisation and nested saturation control via flatness. The control strategy provides bounded inputs (thrust, roll and pitch angles) while ensuring the overall stability of the tracking error dynamics. The control parameters are chosen based on the information of the a priori given reference trajectory. Moreover, conditions for the existence of these parameters are presented. The effectiveness of the trajectory planning and the tracking control design is analysed and validated through simulation and experimental results over a real nano-quadcopter platform, the Crazyflie 2.0

A Survey of path following control strategies for UAVs focused on quadrotors

The trajectory control problem, defined as making a vehicle follow a pre-established path in space, can be solved by means of trajectory tracking or path following. In the trajectory tracking problem a timed reference position is tracked. The path following approach removes any time dependence of the problem, resulting in many advantages on the control performance and design. An exhaustive review of path following algorithms applied to quadrotor vehicles has been carried out, the most relevant are studied in this paper. Then, four of these algorithms have been implemented and compared in a quadrotor simulation platform: Backstepping and Feedback Linearisation control-oriented algorithms and NLGL and Carrot-Chasing geometric algorithms.Peer ReviewedPostprint (author's final draft

Cascaded Model Predictive Control of a Tandem-Rotor Helicopter

This letter considers cascaded model predictive control (MPC) as a computationally lightweight method for controlling a tandem-rotor helicopter. A traditional single MPC structure is split into separate outer and inner-loops. The outer-loop MPC uses an $SE_2(3)$ error to linearize the translational dynamics about a reference trajectory. The inner-loop MPC uses the optimal angular velocity sequence of the outer-loop MPC to linearize the rotational dynamics. The outer-loop MPC is run at a slower rate than the inner-loop allowing for longer prediction time and improved performance. Monte-Carlo simulations demonstrate robustness to model uncertainty and environmental disturbances. The proposed control structure is benchmarked against a single MPC algorithm where it shows significant improvements in position and velocity tracking while using significantly less computational resources.Comment: 6 pages, 3 figure

Robust hovering and trajectory tracking control of a quadrotor helicopter using acceleration feedback and a novel disturbance observer

Hovering and trajectory tracking control of rotary-wing aircrafts in the presence of uncertainties and external disturbances is a very challenging task. This thesis focuses on the development of the robust hovering and trajectory tracking control algorithms for a quadrotor helicopter subject to both periodic and aperiodic disturbances along with noise and parametric uncertainties. A hierarchical control structure is employed where high-level position controllers produce reference attitude angles for the low-level attitude controllers. Reference attitude angles are usually determined analytically from the position command signals that control the positional dynamics. However, such analytical formulas may produce large and non-smooth reference angles which must be saturated and low-pass filtered. In this thesis, desired attitude angles are determined numerically using constrained nonlinear optimization where certain magnitude and rate constraints are imposed. Furthermore, an acceleration based disturbance observer (AbDOB) is designed to estimate and suppress disturbances acting on the positional dynamics of the quadrotor. For the attitude control, a nested position, velocity, and inner acceleration feedback control structure consisting of PID and PI type controllers are developed to provide high sti ness against external disturbances. Reliable angular acceleration is estimated through an extended Kalman filter (EKF) cascaded with a classical Kalman lter (KF). This thesis also proposes a novel disturbance observer which consists of a bank of band-pass filters connected parallel to the low-pass filter of a classical disturbance observer. Band-pass filters are centered at integer multiples of the fundamental frequency of the periodic disturbance. Number and bandwidth of the band-pass filters are two crucial parameters to be tuned in the implementation of the new structure. Proposed disturbance observer is integrated with a sliding mode controller to tackle the robust hovering and trajectory tracking control problem. The sensitivity of the proposed disturbance observer based control system to the number and bandwidth of the band-pass filters are thoroughly investigated via several simulations. Simulations are carried out on a high delity model where sensor biases and measurement noise are also considered. Results show that the proposed controllers are very effective in providing robust hovering and trajectory tracking performance when the quadrotor helicopter is subject to the wind gusts generated by the Dryden wind model along with plant uncertainties and measurement noise. A comparison with the classical disturbance observer-based control is also provided where better tracking performance with improved robustness is achieved in the presence of noise and external disturbance

Towards autonomy of a quadrotor UAV

As the potential of unmanned aerial vehicles rapidly increases, there is a growing interest in rotary vehicles as well as fixed wing. The quadrotor is small agile rotary vehicle controlled by variable speed prop rotors. With no need for a swash plate the vehicle is low cost as well as dynamically simple. In order to achieve autonomous flight, any potential control algorithm must include trajectory generation and trajectory following. Trajectory generation can be done using direct or indirect methods. Indirect methods provide an optimal solution but are hard to solve for anything other than the simplest of cases. Direct methods in comparison are often sub-optimal but can be applied to a wider range of problems. Trajectory optimization is typically performed within the control space, however, by posing the problem in the output space, the problem can be simplified. Differential flatness is a property of some dynamical systems which allows dynamic inversion and hence, output space optimization. Trajectory following can be achieved through any number of linear control techniques, this is demonstrated whereby a single trajectory is followed using LQR, this scheme is limited however, as the vehicle is unable to adapt to environmental changes. Model based predictive control guarantees constraint satisfaction at every time step, this however is time consuming and therefore, a combined controller is proposed benefiting from the adaptable nature of MBPC and the robustness and simplicity of LQR control. There are numerous direct methods for trajectory optimization both in the output and control space. Taranenko’s direct method has a number of benefits over other techniques, including the use of a virtual argument, which separates the optimal path and the speed problem. This enables the algorithm to solve the optimal time problem, the optimal fuel problem or a combination of the two, without a deviation from the optimal path. In order to implement such a control scheme, the issues of feedback, communication and control action computation, require consideration. This work discusses the issues with instrumentation and communication encountered when developing the control system and provides open loop test results. This work also extends the proposed control schemes to consider the problem of multiple vehicle flight rendezvous. Specifically the problem of rendezvous when there is no communication link, limited visibility and no agreed rendezvous point. Using Taranenko’s direct method multiple vehicle rendezvous is simulated.EThOS - Electronic Theses Online ServiceGBUnited Kingdo

MARIT : the design, implementation and trajectory generation with NTG for small UAVs.

This dissertation is about building a Multiple Air Robotics Indoor Testbed (MARIT) for the purpose of developing and validating new methodologies for collaboration and cooperation between heterogeneous Unmanned Air Vehicles (UAVs) as well as expandable to air-and-ground vehicle teams. It introduces a mathematical model for simulation and control of quadrotor Small UAVs (SUAVs). The model is subsequently applied to design an autonomous quadrotor control and tracking system. The dynamics model of quadrotor SUAV is used in several control designs. Each control design is simulated and compared. Based on the comparison, the superior control design is use for experimental flights. Two methods are used to evaluate the control and collect real-time data. The Nonlinear Trajectory Generation (NTG) software package is used to provide optimal trajectories for the SUAVs in MARIT. The dynamics model of the quadrotor is programmed in NTG and various obstacle avoidance scenarios are modeled to establish a platform for optimal trajectory generation for SUAVs. To challenge the capability of NTG for real-time trajectory generation, random obstacles and disturbances are simulated. Various flight simulations validate this trajectory tracking approach

Hybrid active force control for fixed based rotorcraft

Disturbances are considered major challenges faced in the deployment of rotorcraft unmanned aerial vehicle (UAV) systems. Among different types of rotorcraft systems, the twin-rotor helicopter and quadrotor models are considered the most versatile flying machines nowadays due to their range of applications in the civilian and military sectors. However, these systems are multivariate and highly non-linear, making them difficult to be accurately controlled. Their performance could be further compromised when they are operated in the presence of disturbances or uncertainties. This dissertation presents an innovative hybrid control scheme for rotorcraft systems to improve disturbance rejection capability while maintaining system stability, based on a technique called active force control (AFC) via simulation and experimental works. A detailed dynamic model of each aerial system was derived based on the Euler–Lagrange and Newton-Euler methods, taking into account various assumptions and conditions. As a result of the derived models, a proportional-integral-derivative (PID) controller was designed to achieve the required altitude and attitude motions. Due to the PID's inability to reject applied disturbances, the AFC strategy was incorporated with the designed PID controller, to be known as the PID-AFC scheme. To estimate control parameters automatically, a number of artificial intelligence algorithms were employed in this study, namely the iterative learning algorithm and fuzzy logic. Intelligent rules of these AI algorithms were designed and embedded into the AFC loop, identified as intelligent active force control (IAFC)-based methods. This involved, PID-iterative learning active force control (PID-ILAFC) and PID-fuzzy logic active force control (PID-FLAFC) schemes. To test the performance and robustness of these proposed hybrid control systems, several disturbance models were introduced, namely the sinusoidal wave, pulsating, and Dryden wind gust model disturbances. Integral square error was selected as the index performance to compare between the proposed control schemes. In this study, the effectiveness of the PID-ILAFC strategy in connection with the body jerk performance was investigated in the presence of applied disturbance. In terms of experimental work, hardware-in-the-loop (HIL) experimental tests were conducted for a fixed-base rotorcraft UAV system to investigate how effective are the proposed hybrid PID-ILAFC schemes in disturbance rejection. Simulated results, in time domains, reveal the efficacy of the proposed hybrid IAFC-based control methods in the cancellation of different applied disturbances, while preserving the stability of the rotorcraft system, as compared to the conventional PID controller. In most of the cases, the simulated results show a reduction of more than 55% in settling time. In terms of body jerk performance, it was improved by around 65%, for twin-rotor helicopter system, and by a 45%, for quadrotor system. To achieve the best possible performance, results recommend using the full output signal produced by the AFC strategy according to the sensitivity analysis. The HIL experimental tests results demonstrate that the PID-ILAFC method can improve the disturbance rejection capability when compared to other control systems and show good agreement with the simulated counterpart. However, the selection of the appropriate learning parameters and initial conditions is viewed as a crucial step toward this improved performance

Advanced Feedback Linearization Control for Tiltrotor UAVs: Gait Plan, Controller Design, and Stability Analysis

Three challenges, however, can hinder the application of Feedback Linearization: over-intensive control signals, singular decoupling matrix, and saturation. Activating any of these three issues can challenge the stability proof. To solve these three challenges, first, this research proposed the drone gait plan. The gait plan was initially used to figure out the control problems in quadruped (four-legged) robots; applying this approach, accompanied by Feedback Linearization, the quality of the control signals was enhanced. Then, we proposed the concept of unacceptable attitude curves, which are not allowed for the tiltrotor to travel to. The Two Color Map Theorem was subsequently established to enlarge the supported attitude for the tiltrotor. These theories were employed in the tiltrotor tracking problem with different references. Notable improvements in the control signals were witnessed in the tiltrotor simulator. Finally, we explored the control theory, the stability proof of the novel mobile robot (tilt vehicle) stabilized by Feedback Linearization with saturation. Instead of adopting the tiltrotor model, which is over-complicated, we designed a conceptual mobile robot (tilt-car) to analyze the stability proof. The stability proof (stable in the sense of Lyapunov) was found for a mobile robot (tilt vehicle) controlled by Feedback Linearization with saturation for the first time. The success tracking result with the promising control signals in the tiltrotor simulator demonstrates the advances of our control method. Also, the Lyapunov candidate and the tracking result in the mobile robot (tilt-car) simulator confirm our deductions of the stability proof. These results reveal that these three challenges in Feedback Linearization are solved, to some extents.Comment: Doctoral Thesis at The University of Toky