A Multiple Bit Parity Fault Detection Scheme for The Advanced Encryption Standard Galois/Counter Mode

The Advanced Encryption Standard (AES) is a symmetric-key block cipher for electronic data announced by the U.S. National Institute of Standards and Technology (NIST) in 2001. The encryption process is based on symmetric key (using the same key for both encryption and decryption) for block encryption of 128, 192, and 256 bits in size. AES and its standardized authentication Galois/Counter Mode (GCM) have been adopted in numerous security-based applications. GCM is a mode of operation for AES symmetric key cryptographic block ciphers, which has been selected for its high throughput rates in high speed communication channels. The GCM is an algorithm for authenticated encryption to provide both data authenticity and confidentiality that can be achieved with reasonable hardware resources. The hardware implementation of the AES-GCM demands tremendous amount of logic blocks and gates. Due to natural faults or intrusion attacks, faulty outputs in different logic blocks of the AES-GCM module results in erroneous output. There exist plenty of specific literature on methods of fault detection in the AES section of the AES-GCM. In this thesis, we consider a novel fault detection of the GCM section using parity prediction. For the purpose of fault detection in GCM, two independent methods are proposed. First, a new technique of fault detection using parity prediction for the entire GCM loop is presented. Then, matrix based CRC multiple-bit parity prediction schemes are developed and implemented. As a result, we achieve the fault coverage of about 99% with the longest path delay and area overhead of 23% and 10.9% respectively. The false alarm is 0.12% which can be ignored based on the number of injected faults

Error Detecting Dual Basis Bit Parallel Systolic Multiplication Architecture over GF(2m)

An error tolerant hardware efficient very large scale integration (VLSI) architecture for bit parallel systolic multiplication over dual base, which can be pipelined, is presented. Since this architecture has the features of regularity, modularity and unidirectional data flow, this structure is well suited to VLSI implementations. The length of the largest delay path and area of this architecture are less compared to the bit parallel systolic multiplication architectures reported earlier. The architecture is implemented using Austria Micro System's 0.35 m CMOS (complementary metal oxide semiconductor) technology. This architecture can also operate over both the dual-base and polynomial base

Multiple bit error correcting architectures over finite fields

This thesis proposes techniques to mitigate multiple bit errors in GF arithmetic circuits. As GF arithmetic circuits such as multipliers constitute the complex and important functional unit of a crypto-processor, making them fault tolerant will improve the reliability of circuits that are employed in safety applications and the errors may cause catastrophe if not mitigated. Firstly, a thorough literature review has been carried out. The merits of efficient schemes are carefully analyzed to study the space for improvement in error correction, area and power consumption. Proposed error correction schemes include bit parallel ones using optimized BCH codes that are useful in applications where power and area are not prime concerns. The scheme is also extended to dynamically correcting scheme to reduce decoder delay. Other method that suits low power and area applications such as RFIDs and smart cards using cross parity codes is also proposed. The experimental evaluation shows that the proposed techniques can mitigate single and multiple bit errors with wider error coverage compared to existing methods with lesser area and power consumption. The proposed scheme is used to mask the errors appearing at the output of the circuit irrespective of their cause. This thesis also investigates the error mitigation schemes in emerging technologies (QCA, CNTFET) to compare area, power and delay with existing CMOS equivalent. Though the proposed novel multiple error correcting techniques can not ensure 100% error mitigation, inclusion of these techniques to actual design can improve the reliability of the circuits or increase the difficulty in hacking crypto-devices. Proposed schemes can also be extended to non GF digital circuits

Reliable and High-Performance Hardware Architectures for the Advanced Encryption Standard/Galois Counter Mode

The high level of security and the fast hardware and software implementations of the Advanced Encryption Standard (AES) have made it the first choice for many critical applications. Since its acceptance as the adopted symmetric-key algorithm, the AES has been utilized in various security-constrained applications, many of which are power and resource constrained and require reliable and efficient hardware implementations. In this thesis, first, we investigate the AES algorithm from the concurrent fault detection point of view. We note that in addition to the efficiency requirements of the AES, it must be reliable against transient and permanent internal faults or malicious faults aiming at revealing the secret key. This reliability analysis and proposing efficient and effective fault detection schemes are essential because fault attacks have become a serious concern in cryptographic applications. Therefore, we propose, design, and implement various novel concurrent fault detection schemes for different AES hardware architectures. These include different structure-dependent and independent approaches for detecting single and multiple stuck-at faults using single and multi-bit signatures. The recently standardized authentication mode of the AES, i.e., Galois/Counter Mode (GCM), is also considered in this thesis. We propose efficient architectures for the AES-GCM algorithm. In this regard, we investigate the AES algorithm and we propose low-complexity and low-power hardware implementations for it, emphasizing on its nonlinear transformation, i.e., SubByes (S-boxes). We present new formulations for this transformation and through exhaustive hardware implementations, we show that the proposed architectures outperform their counterparts in terms of efficiency. Moreover, we present parallel, high-performance new schemes for the hardware implementations of the GCM to improve its throughput and reduce its latency. The performance of the proposed efficient architectures for the AES-GCM and their fault detection approaches are benchmarked using application-specific integrated circuit (ASIC) and field-programmable gate array (FPGA) hardware platforms. Our comparison results show that the proposed hardware architectures outperform their existing counterparts in terms of efficiency and fault detection capability

Concurrent Error Detection in Finite Field Arithmetic Operations

With significant advances in wired and wireless technologies and also increased shrinking in the size of VLSI circuits, many devices have become very large because they need to contain several large units. This large number of gates and in turn large number of transistors causes the devices to be more prone to faults. These faults specially in sensitive and critical applications may cause serious failures and hence should be avoided. On the other hand, some critical applications such as cryptosystems may also be prone to deliberately injected faults by malicious attackers. Some of these faults can produce erroneous results that can reveal some important secret information of the cryptosystems. Furthermore, yield factor improvement is always an important issue in VLSI design and fabrication processes. Digital systems such as cryptosystems and digital signal processors usually contain finite field operations. Therefore, error detection and correction of such operations have become an important issue recently. In most of the work reported so far, error detection and correction are applied using redundancies in space (hardware), time, and/or information (coding theory). In this work, schemes based on these redundancies are presented to detect errors in important finite field arithmetic operations resulting from hardware faults. Finite fields are used in a number of practical cryptosystems and channel encoders/decoders. The schemes presented here can detect errors in arithmetic operations of finite fields represented in different bases, including polynomial, dual and/or normal basis, and implemented in various architectures, including bit-serial, bit-parallel and/or systolic arrays

Synthesis and Optimization of Reversible Circuits - A Survey

Reversible logic circuits have been historically motivated by theoretical research in low-power electronics as well as practical improvement of bit-manipulation transforms in cryptography and computer graphics. Recently, reversible circuits have attracted interest as components of quantum algorithms, as well as in photonic and nano-computing technologies where some switching devices offer no signal gain. Research in generating reversible logic distinguishes between circuit synthesis, post-synthesis optimization, and technology mapping. In this survey, we review algorithmic paradigms --- search-based, cycle-based, transformation-based, and BDD-based --- as well as specific algorithms for reversible synthesis, both exact and heuristic. We conclude the survey by outlining key open challenges in synthesis of reversible and quantum logic, as well as most common misconceptions.Comment: 34 pages, 15 figures, 2 table

Dependability Assessment of NAND Flash-memory for Mission-critical Applications

It is a matter of fact that NAND flash memory devices are well established in consumer market. However, it is not true that the same architectures adopted in the consumer market are suitable for mission critical applications like space. In fact, USB flash drives, digital cameras, MP3 players are usually adopted to store "less significant" data which are not changing frequently (e.g., MP3s, pictures, etc.). Therefore, in spite of NAND flash's drawbacks, a modest complexity is usually needed in the logic of commercial flash drives. On the other hand, mission critical applications have different reliability requirements from commercial scenarios. Moreover, they are usually playing in a hostile environment (e.g., the space) which contributes to worsen all the issues. We aim at providing practical valuable guidelines, comparisons and tradeoffs among the huge number of dimensions of fault tolerant methodologies for NAND flash applied to critical environments. We hope that such guidelines will be useful for our ongoing research and for all the interested reader

Dependability Assessment of NAND Flash-memory for Mission-critical Applications

It is a matter of fact that NAND flash memory devices are well established in consumer market. However, it is not true that the same architectures adopted in the consumer market are suitable for mission critical applications like space. In fact, USB flash drives, digital cameras, MP3 players are usually adopted to store "less significant" data which are not changing frequently (e.g., MP3s, pictures, etc.). Therefore, in spite of NAND flash’s drawbacks, a modest complexity is usually needed in the logic of commercial flash drives. On the other hand, mission critical applications have different reliability requirements from commercial scenarios. Moreover, they are usually playing in a hostile environment (e.g., the space) which contributes to worsen all the issues. We aim at providing practical valuable guidelines, comparisons and tradeoffs among the huge number of dimensions of fault tolerant methodologies for NAND flash applied to critical environments. We hope that such guidelines will be useful for our ongoing research and for all the interested readers

Reliable Hardware Architectures for Cyrtographic Block Ciphers LED and HIGHT

Cryptographic architectures provide different security properties to sensitive usage models. However, unless reliability of architectures is guaranteed, such security properties can be undermined through natural or malicious faults. In this thesis, two underlying block ciphers which can be used in authenticated encryption algorithms are considered, i.e., LED and HIGHT block ciphers. The former is of the Advanced Encryption Standard (AES) type and has been considered areaefficient, while the latter constitutes a Feistel network structure and is suitable for low-complexity and low-power embedded security applications. In this thesis, we propose efficient error detection architectures including variants of recomputing with encoded operands and signature-based schemes to detect both transient and permanent faults. Authenticated encryption is applied in cryptography to provide confidentiality, integrity, and authenticity simultaneously to the message sent in a communication channel. In this thesis, we show that the proposed schemes are applicable to the case study of Simple Lightweight CFB (SILC) for providing authenticated encryption with associated data (AEAD). The error simulations are performed using Xilinx ISE tool and the results are benchmarked for the Xilinx FPGA family Virtex- 7 to assess the reliability capability and efficiency of the proposed architectures