The Road Ahead for Networking: A Survey on ICN-IP Coexistence Solutions

In recent years, the current Internet has experienced an unexpected paradigm shift in the usage model, which has pushed researchers towards the design of the Information-Centric Networking (ICN) paradigm as a possible replacement of the existing architecture. Even though both Academia and Industry have investigated the feasibility and effectiveness of ICN, achieving the complete replacement of the Internet Protocol (IP) is a challenging task. Some research groups have already addressed the coexistence by designing their own architectures, but none of those is the final solution to move towards the future Internet considering the unaltered state of the networking. To design such architecture, the research community needs now a comprehensive overview of the existing solutions that have so far addressed the coexistence. The purpose of this paper is to reach this goal by providing the first comprehensive survey and classification of the coexistence architectures according to their features (i.e., deployment approach, deployment scenarios, addressed coexistence requirements and architecture or technology used) and evaluation parameters (i.e., challenges emerging during the deployment and the runtime behaviour of an architecture). We believe that this paper will finally fill the gap required for moving towards the design of the final coexistence architecture.Comment: 23 pages, 16 figures, 3 table

Centralized vs distributed communication scheme on switched ethernet for embedded military applications

Current military communication network is a generation old and is no longer effective in meeting the emerging requirements imposed by the future embedded military applications. Therefore, a new interconnection system is needed to overcome these limitations. Two new communication networks based upon Full Duplex Switched Ethernet are presented herein in this aim. The first one uses a distributed communication scheme where equipments can emit their data simultaneously, which clearly improves system’s throughput and flexibility. However, migrating all existing applications into a compliant form could be an expensive step. To avoid this process, the second proposal consists in keeping the current centralized communication scheme. Our objective is to assess and compare the real time guarantees that each proposal can offer. The paper includes the functional description of each proposed communication network and a military avionic application to highlight proposals ability to support the required time constrained communications

POWER LINE COMMUNICATIONS FOR SMART HOME NETWORKS: MODELING, SIMULATION AND OPTIMIZATION

In recent years, research and development efforts are devoted to the deployment of information and communication technology (ICT) within residential buildings and houses, in order to provide services that will increase the quality of life. Although this trend is originated in the late 60’s as a result of the application of industrial automation to residential buildings and houses, i.e., home automation, nowadays, further services are offered to the final users, i.e., home networking and energy management. In fact, a lot of effort is put on the joint delivery of these services in order to make the home, namely the smart home (SH), an integral part of the future smart grid (SG). The concept of SH can be described as a house equipped with electronic systems and appliances, namely, “smart” appliances, which are able to exchange information by means of a communication network. However, these systems are characterized by a broad variety of communication technologies, standards and protocols, so that they often cannot interconnect, and/or interoperate and in some cases even coexist. In our opinion, coexistence, interconnection and interoperability problems represents the bottleneck to a pervasive deployment of smart appliances and systems within residential buildings and houses. To this respect, the first topic that we consider in this thesis is the definition of the SH network architecture and devices, which allows to obtain convergence among smart appliances. To this aim, a survey of the communication technologies, standards, protocols and also media, which can be used for SH applications, is necessary in order to define a network topology that is able to be scalable, extensible, and rather reliable. Moreover, in order to achieve interconnectivity among “smart” appliances, we define a shared common layer that is able to manage heterogeneous lower layers allowing network convergence. Once defined the SH network architecture and its network devices, we focus on power line communication (PLC) technologies and we implement a network testbed in order to evaluate some of the functionalities of the SH network within real environments. From the analysis of field trial data, we are able to highlight performances and disadvantages of two representative narrow band PLC (NB-PLC) solutions. Furthermore, exploiting the network testbed where broadband PLC (BB-PLC) technology is used to provide an Ethernet backbone for NB-PLC devices, we achieve interconnectivity between heterogeneous devices and we observe a significant improvement of the performances. Although NB-PLC technologies have been conceived for the development of low data rate applications and, in particular, for automatic meter reading (AMR), we focus our attention on the G3-PLC technology, for which we propose enhancements at the medium access control (MAC) sub-layer to allow the implementation of SH applications that could potentially require higher data rate than AMR. The G3-PLC technology has been taken into account since (i) it has been used as baseline technology for the development of popular communication standards for SG applications, and (ii) we have found, from the field trials, that the performance of NB-PLC may be poor in large houses where the signal is strongly attenuated because it spans large distances and crosses different circuit breakers (CBs), e.g., in multi-floor houses. Furthermore, an innovative cross-platform simulator that allows to realistically simulate the G3-PLC technology up to the network layer is presented. The proposed cross-platform consists of two different simulators jointly connected: one for the physical (PHY) layer and one for the data link layer (DLL)/network layer (NL). The PHY layer simulator is implemented in MATLAB, while the DLL/network simulator in OMNeT++. A convergent network architecture that permits the integration of the G3-PLC technology within a switched Ethernet network is also presented with the aim of improving the G3-PLC performance in large scale houses/buildings. The performance of the considered communication technology are presented through extensive numerical results for the in-home application scenario. Finally, the cross-platform simulator is used to evaluate G3-PLC systems for SG applications in the access network scenario. This is fundamental since the interaction of the outside world, i.e., the access network, with the SH is mandatory in order to achieve and exploit the SG concept. Moreover, to improve the performance and coverage of G3-PLC, a simple adaptive tone mapping algorithm together with a routing algorithm are also presented.Ricerca condotta all'interno del WiPLi Lab/Wireless and Power Line Communications LaboratoryopenDottorato di ricerca in Ingegneria industriale e dell'informazioneopenDI BERT, Luc

Full duplex switched ethernet for next generation "1553B" -based applications

Over the last thirty years, the MIL-STD 1553B data bus has been used in many embedded systems, like aircrafts, ships, missiles and satellites. However, the increasing number and complexity of interconnected subsystems lead to emerging needs for more communication bandwidth. Therefore, a new interconnection system is needed to overcome the limitations of the MIL-STD 1553B data bus. Among several high speed networks, Full Duplex Switched Ethernet is put forward here as an attractive candidate to replace the MIL-STD 1553B data bus. However, the key argument against Switched Ethernet lies in its non-deterministic behavior that makes it inadequate to deliver hard timeconstrained communications. Hence, our primary objective in this paper is to achieve an accepted QoS level offered by Switched Ethernet, to support diverse "1553B"-based applications requirements. We evaluate the performance of traffic shaping techniques on Full Duplex Switched Ethernet with an adequate choice of service strategy in the switch, to guarantee the real-time constraints required by these specific 1553B-based applications. An analytic study is conducted, using the Network Calculus formalism, to evaluate the deterministic guarantees offered by our approach. Theoretical analysis are then investigated in the case of a realistic "1553B"-based application extracted from a real military aircraft network. The results herein show the ability of profiled Full Duplex Switched Ethernet to satisfy 1553B-like real-time constraints

Will SDN be part of 5G?

For many, this is no longer a valid question and the case is considered settled with SDN/NFV (Software Defined Networking/Network Function Virtualization) providing the inevitable innovation enablers solving many outstanding management issues regarding 5G. However, given the monumental task of softwarization of radio access network (RAN) while 5G is just around the corner and some companies have started unveiling their 5G equipment already, the concern is very realistic that we may only see some point solutions involving SDN technology instead of a fully SDN-enabled RAN. This survey paper identifies all important obstacles in the way and looks at the state of the art of the relevant solutions. This survey is different from the previous surveys on SDN-based RAN as it focuses on the salient problems and discusses solutions proposed within and outside SDN literature. Our main focus is on fronthaul, backward compatibility, supposedly disruptive nature of SDN deployment, business cases and monetization of SDN related upgrades, latency of general purpose processors (GPP), and additional security vulnerabilities, softwarization brings along to the RAN. We have also provided a summary of the architectural developments in SDN-based RAN landscape as not all work can be covered under the focused issues. This paper provides a comprehensive survey on the state of the art of SDN-based RAN and clearly points out the gaps in the technology.Comment: 33 pages, 10 figure