Adapted Delaunay triangulation method for free-form surface generation from random point clouds for stochastic optimization applications

Free-form surfaces are defined with NURBS (non-uniform rational basis spline) for most computer-aided engineering (CAE) applications. The NURBS method requires the definition of parameters such as weights, knot vectors and degree of the curves which make the configuration of the surface computationally expensive and complex. When the control points are randomly spaced in the point cloud and the topology of the desired surface is unknown, surface configuration with NURBS method becomes a challenging task. Optimization attempts for such surfaces create enormous amounts of computing data when coupled with physics solvers such as finite element analysis (FEA) tools and computational fluid dynamics (CFD) tools. In this paper, an adapted Delaunay triangulation (ADT) method for surface generation from the random points cloud is proposed and compared with widely used implicit functions based NURBS fitting method. The surface generated from ADT method can be simultaneously used with stochastic optimization algorithms (SOA) and CFD applications to search for the optimal results with minimum computational costs. It was observed while comparing ADT with NURBS-based geometry configuration that the computation time can be reduced by 3 folds. The corresponding deviation between both geometry configuration methods has been observed as low as 5% for all optimisation scenarios during the comparison. In addition, ADT method can provide light weight CFD approach as any instance of design iteration has at least half storage footprint as compared to corresponding NURBS surface. The proposed approach provides novel methodology towards establishing light weight CFD geometry, absence of which currently isolates methodologies for optimization and CFD analysis

A novel approach for computing C-2-continuous offset of NURBS curves

Computing offset curves is an important geometric operation in areas of CAD/CAM, robotics, cam design and many industrial applications. In this paper, an algorithm for computing offsets of NURBS curves using C-2-continuous B-spline curves is presented. The progenitor curve in database is initially approximated by a line-fitting curve, and then the exact offset of this line-fitting curve is introduced as an initial offset. Based on the initial offset and a set of selected knots, an intended C-2-continuous B-spline curve is subsequently constructed. The method uses a new error-measuring scheme, which is based on the convex hull property of Bezier curves and the idea of cumulative errors, to calculate the global error bound of offset approximation. The method obtains offset curves with C-2 continuity and guarantees that the actual error bound is precisely within the prescribed tolerance. In addition, it also allows one to selectively parametrize the offset curve

Optimization of Three-Axis Vertical Milling of Sculptured Surfaces

A tool path generation method for sculptured surfaces defined by triangular meshes is presented in this thesis along with an algorithm that helps determine the best type of cutter geometry to machine a specific surface. Existing tool path planning methods for sculptured surfaces defined by triangular meshes require extensive computer processing power and result in long processing times mainly since surface topology for triangular meshes is not provided. The method presented in this thesis avoids this problem by offsetting each triangular facet individually. The combination of all the individual offsets make up a cutter location surface. A single triangle offsetting results in many more triangles; many of these are redundant, increasing the time required for data handling in subsequent steps. To avoid the large number of triangles, the proposed method creates a bounding space to which the offset surface is limited. The original surface mesh describes the bounding surface of a solid, thus it is continuous with no gaps. Therefore, the resulting bounding spaces are also continuous and without gaps. Applying the boundary space limits the size of the offset surface resulting in a reduction in the number of triangular surfaces generated. The offset surface generation may result in unwanted intersecting triangles. The tool path planning strategy addresses this issue by applying hidden-surface removal algorithms. The cutter locations from the offset surface are obtained using the depth buffer. The simulation and machining results show that the tool paths generated by this process are correct. Furthermore, the time required to generate tool paths is less than the time required by other methods. The second part of this thesis presents a method for selecting an optimal cutter type. Extensive research has been carried out to determine the best cutter size for a given machining operation. However, cutter type selection has not been studied in-depth. This work presents a method for selecting the best cutter type based on the amount of material removed. By comparing the amount of material removed by two cutters at a given cutter location the best cutter can be selected. The results show that the optimal cutter is highly dependent on the surface geometry. For most complex surfaces it was found that a combination of cutters provides the best results

오프셋 곡선 및 곡면의 자가 교차 검출 및 제거

학위논문(박사)--서울대학교 대학원 :공과대학 컴퓨터공학부,2020. 2. 김명수.Offset curves and surfaces have many applications in computer-aided design and manufacturing, but the self-intersections and redundancies must be trimmed away for their practical use. We present a new method for offset curve and surface trimming that detects the self-intersections and eliminates the redundant parts of an offset curve and surface that are closer than the offset distance to the original curve and surface. We first propose an offset trimming method based on constructing geometric constraint equations. We formulate the constraint equations of the self-intersections of an offset curve and surface in the parameter domain of the original curve and surface. Numerical computations based on the regularity and intrinsic properties of the given input curve and surface is carried out to compute the solution of the constraint equations. The method deals with numerical instability around near-singular regions of an offset surface by using osculating tori that can be constructed in a highly stable way, i.e., by offsetting the osculating torii of the given input regular surface. We reveal the branching structure and the terminal points from the complete self-intersection curves of the offset surface. From the observation that the trimming method based on the multivariate equation solving is computationally expensive, we also propose an acceleration technique to trim an offset curve and surface. The alternative method constructs a bounding volume hierarchy specially designed to enclose the offset curve and surface and detects the self-collision of the bounding volumes instead. In the case of an offset surface, the thickness of the bounding volumes is indirectly determined based on the maximum deviations of the positions and the normals between the given input surface patches and their osculating tori. For further acceleration, the bounding volumes are pruned as much as possible during self-collision detection using various geometric constraints imposed on the offset surface. We demonstrate the effectiveness of the new trimming method using several non-trivial test examples of offset trimming. Lastly, we investigate the problem of computing the Voronoi diagram of a freeform surface using the offset trimming technique for surfaces. By trimming the offset surface with a gradually changing offset radius, we compute the boundary of the Voronoi cells that appear in the concave side of the given input surface. In particular, we interpret the singular and branching points of the self-intersection curves of the trimmed offset surfaces in terms of the boundary elements of the Voronoi diagram.오프셋 곡선 및 곡면은 computer-aided design (CAD)와 computer-aided manufacturing (CAM)에서 널리 이용되는 연산들 중 하나이다. 하지만 실용적인 활용을 위해서는 오프셋 곡선 및 곡면에서 생기는 자가 교차를 찾고 이를 기준으로 오프셋 곡선 및 곡면에서 원래의 곡선 및 곡면에 가까운 불필요한 영역을 제거하여야한다. 본 논문에서는 오프셋 곡선 및 곡면에서 생기는 자가 교차를 계산하고, 오프셋 곡선 및 곡면에서 생기는 불필요한 영역을 제거하는 알고리즘을 제안한다. 본 논문은 우선 오프셋 곡선 및 곡면의 자가 교차점들과 그 교차점들이 기인한 원래 곡선 및 곡면의 점들이 이루는 평면 이등변 삼각형 관계로부터 오프셋 곡선 및 곡면의 자가 교차점의 제약 조건을 만족시키는 방정식들을 세운다. 이 제약식들은 원래 곡선 및 곡면의 변수 공간에서 표현되며, 이 방정식들의 해는 다변수 방정식의 해를 구하는 solver를 이용하여 구한다. 오프셋 곡면의 경우, 원래 곡면의 주곡률 중 하나가 오프셋 반지름의 역수와 같을 때 오프셋 곡면의 법선이 정의가 되지 않는 특이점이 생기는데, 오프셋 곡면의 자가 교차 곡선이 이 부근을 지날 때는 자가 교차 곡선의 계산이 불안정해진다. 따라서 자가 교차 곡선이 오프셋 곡면의 특이점 부근을 지날 때는 오프셋 곡면을 접촉 토러스로 치환하여 더 안정된 방법으로 자가 교차 곡선을 구한다. 계산된 오프셋 곡면의 자가 교차 곡선으로부터 교차 곡선의 $xyz$-공간에서의 말단 점, 가지 구조 등을 밝힌다. 본 논문은 또한 바운딩 볼륨 기반의 오프셋 곡선 및 곡면의 자가 교차 곡선 검출을 가속화하는 방법을 제시한다. 바운딩 볼륨은 기저 곡선 및 곡면을 단순한 기하로 감싸고 기하 연산을 수행함으로써 가속화에 기여한다. 오프셋 곡면의 자가 교차 곡선을 구하기 위하여, 본 논문은 오프셋 곡면의 바운딩 볼륨 구조를 기저 곡면의 바운딩 볼륨과 기저 곡면의 법선 곡면의 바운딩 볼륨의 구조로부터 계산하며 이때 각 바운딩 볼륨의 두께를 계산한다. 또한, 바운딩 볼륨 중에서 실제 오프셋 곡선 및 곡면의 자가 교차에 기여하지 않는 부분을 깊은 재귀 전에 찾아서 제거하는 여러 조건들을 나열한다. 한편, 자가 교차가 제거된 오프셋 곡선 및 곡면은 기저 곡선 및 곡면의 보로노이 구조와 깊은 관련이 있는 것이 알려져 있다. 본 논문에서는 자유 곡면의 연속된 오프셋 곡면들로부터 자유 곡면의 보로노이 구조를 유추하는 방법을 제시한다. 특히, 오프셋 곡면의 자가 교차 곡선 상에서 나타나는 가지 점이나 말단 점과 같은 특이점들이 자유 곡면의 보로노이 구조에서 어떻게 해석되는지 제시한다.1. Introduction 1 1.1 Background and Motivation 1 1.2 Research Objectives and Approach 7 1.3 Contributions and Thesis Organization 11 2. Preliminaries 14 2.1 Curve and Surface Representation 14 2.1.1 Bezier Representation 14 2.1.2 B-spline Representation 17 2.2 Differential Geometry of Curves and Surfaces 19 2.2.1 Differential Geometry of Curves 19 2.2.2 Differential Geometry of Surfaces 21 3. Previous Work 23 3.1 Offset Curves 24 3.2 Offset Surfaces 27 3.3 Offset Curves on Surfaces 29 4. Trimming Offset Curve Self-intersections 32 4.1 Experimental Results 35 5. Trimming Offset Surface Self-intersections 38 5.1 Constraint Equations for Offset Self-Intersections 38 5.1.1 Coplanarity Constraint 39 5.1.2 Equi-angle Constraint 40 5.2 Removing Trivial Solutions 40 5.3 Removing Normal Flips 41 5.4 Multivariate Solver for Constraints 43 5.A Derivation of f(u,v) 46 5.B Relationship between f(u,v) and Curvatures 47 5.3 Trimming Offset Surfaces 50 5.4 Experimental Results 53 5.5 Summary 57 6. Acceleration of trimming offset curves and surfaces 62 6.1 Motivation 62 6.2 Basic Approach 67 6.3 Trimming an Offset Curve using the BVH 70 6.4 Trimming an Offset Surface using the BVH 75 6.4.1 Offset Surface BVH 75 6.4.2 Finding Self-intersections in Offset Surface Using BVH 87 6.4.3 Tracing Self-intersection Curves 98 6.5 Experimental Results 100 6.6 Summary 106 7. Application of Trimming Offset Surfaces: 3D Voronoi Diagram 107 7.1 Background 107 7.2 Approach 110 7.3 Experimental Results 112 7.4 Summary 114 8. Conclusion 119 Bibliography iDocto

Finite element method in cooling analysis and design of plastic injection moulds

Ph.DDOCTOR OF PHILOSOPH